Abstract
In DSAL, contacts (or vias) are patterned in two steps. A GP that surrounds a group of nearby contacts forms on a wafer through optical lithography; member contacts then form through DSA process that arises within a GP. Final contact shape can be predicted by two sequential simulations: lithography simulation to predict GP shape and DSA simulation to predict contact. In reality, the two simulations should be repeated to account for lithography as well as DSA variations.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
H. Yi, X. Bao, R. Tiberio, P. Wong, Design strategy of small topographical guiding templates for sub-15nm integrated circuits contact hole patterns using block copolymer directed self-assembly, in Proceedings of the SPIE Advanced Lithography (2013), pp. 1–9
L. Liebmann, S. Mansfield, G. Han, J. Culp, J. Hibbeler, R. Tsai, Reducing DfM to practice: the lithography manufacturability assessor, in Proceedings SPIE Advanced Lithography (2006), pp. 786–798
J.P. Cain, Design for manufacturability: a fabless perspective, in Proceedings of the SPIE Advanced Lithography (2013), pp. 1–9
K. Peter, R. Marz, S. Grondahl, W. Maurer, Litho-friendly design (LfD) methodologies applied to library cells, in Proceedings of the SPIE Advanced Lithography (2013), pp. 1–9
H.D. Ceniceros, G.H. Fredrickson, Numerical solution of polymer self-consistent field theory. Multiscale Model. Simul. 2(3), 452–474 (2004)
N. Laachi, K.T. Delaney, B. Kim, S. Hur, R. Bristol, D. Shykind, C.J. Weinheimer, G.H. Fredrickson, Self-consistent field theory investigation of directed self-assembly in cylindrical confinement. J. Polym. Sci. Part B Polym. Phys. 53(2), 142–153 (2015)
S. Shim, Y. Shin, Mask optimization for directed self-assembly lithography: inverse DSA and inverse lithography, in Proceedings of the Asia South Pacific Design Automation Conference (2016), pp. 83–88
S. Shim, W. Chung, Y. Shin, Defect probability of directed self-assembly lithography: fast identification and post-placement optimization, in Proceedings of the International Conference on Computer Aided Design (2015), pp. 404–409
W. Chung, S. Shim, Y. Shin, Redundant via insertion in directed self-assembly lithography, in Proceedings of the Design, Automation and Test in Europe Conference and Exhibition (2016), pp. 55–60
Samsung Electronics Corp. DFM Principal Engineer, Personal Communication (2015)
Samsung Electronics Corp. OPC Principal Engineer, Personal Communication (2015)
H. Yi, L. Azat, P. Wong, Computational simulation of block copolymer directed self-assembly in small topographical guiding templates, in Proceedings of the SPIE Advanced Lithography (2013), pp. 1–7
M. C. Smayling, V. Axelrad, 32nm and below logic patterning using optimized illumination and double patterning, in Proceedings of the SPIE Advanced Lithography (2009), pp. 1–10
Nangate 15nm open cell library, http://www.nangate.com/
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG, part of Springer Nature
About this chapter
Cite this chapter
Shim, S., Shin, Y. (2018). DSAL Manufacturability. In: Physical Design and Mask Synthesis for Directed Self-Assembly Lithography. NanoScience and Technology. Springer, Cham. https://doi.org/10.1007/978-3-319-76294-4_2
Download citation
DOI: https://doi.org/10.1007/978-3-319-76294-4_2
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-76293-7
Online ISBN: 978-3-319-76294-4
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)