Abstract
Companies lack a trained workforce with the ability to justify the utilization of Additive Manufacturing (AM) technologies in manufacturing activities. The problem is that traditional education in engineering design and manufacturing is heavily constrained by the design rules imposed by conventional manufacturing, which are based on subtractive and formative methods. AM applications have been originally tightened to prototyping applications, generating misconceptions regarding its suitability for companies accustomed to playing by the rules of economies of scale. Thus, the economic aspects of AM implementation in end-production applications are not fully understood. This book chapter presents several interrelated AM technology transfer case studies which were performed in collaboration with Aalto University and companies involved in European and Finnish funded research and innovation initiatives. The objective is to provide a pedagogical and comprehensive approach to the key parameters to consider when a design engineer needs to asses AM for production environments (i.e. cost, time and functionality). The results of this research show that justification of AM technology transfer based on cost will only allow the ‘manufacturing of few’ and production of one-of-a kind component. On the other hand, availability of AM parts, reduction of time-to-market as well as reduced delivery lead times can become fundamental in the service operation of manufacturing companies, thus enabling AM technology transfer. Nevertheless, mass-customization applications and improved product functionality become the key parameters that makes AM truly competitive versus other conventional manufacturing methods. The understanding of these parameters and its interlinks with industrial decision-making will open a window with a huge potential for AM applications in traditional OEMs, especially in manufacturing applications from which complete new products and processes can be innovated.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Aslam Bhutta, M. M., Hayat, N., Bashir, M. H., Khan, A. R., Ahmad, K. N., & Khan, S. (2012). CFD applications in various heat exchangers design: A review. Applied Thermal Engineering, 32, 1–12. https://doi.org/10.1016/j.applthermaleng.2011.09.001.
Bogue, R. (2013). 3D printing: The dawn of a new era in manufacturing? Assembly Automation, 33, 307–311. https://doi.org/10.1108/AA-06-2013-055.
Conner, B. P., Manogharan, G. P., Martof, A. N., Rodomsky, L. M., Rodomsky, C. M., Jordan, D. C., et al. (2014). Making sense of 3-D printing: Creating a map of additive manufacturing products and services. Additive Manufacturing, 1–4, 64–76. https://doi.org/10.1016/j.addma.2014.08.005.
Flores Ituarte, I., Huotilainen, E., Mohite, A., Chekurov, S., Salmi, M., Helle, J., Wang, M., Kukko, K., Björkstrand, R., Tuomi, J., & Partanen, J. (2016a). 3D printing and applications: Academic research through case studies in Finland. In: Nord design, design society.
Flores Ituarte, I., Khajavi, S. H., & Partanen, J. (2016b). Challenges to implementing additive manufacturing in globalised production environments. International Journal of Collaborative Enterprise, 5, 232–247.
Gibson, I. (2017). The changing face of additive manufacturing. Journal of Manufacturing Technology Management, 28, null. https://doi.org/10.1108/jmtm-12-2016-0182.
Hopkinson, N., & Dickens, P. (2003). Analysis of rapid manufacturing—using layer manufacturing processes for production. Mechanical Engineering Science, 217, 31–39.
Jiang, R., Kleer, R., & Piller, F. T. (2017). Predicting the future of additive manufacturing: A Delphi study on economic and societal implications of 3D printing for 2030. Technological Forecasting and Social Change, 117, 84–97. https://doi.org/10.1016/j.techfore.2017.01.006.
Khajavi, S. H., Partanen, J., & Holmström, J. (2014). Additive manufacturing in the spare parts supply chain. Computers in Industry, 65, 50–63. https://doi.org/10.1016/j.compind.2013.07.008.
Khorram Niaki, M., & Nonino, F. (2017). Impact of additive manufacturing on business competitiveness: A multiple case study. Journal of Manufacturing Technology Management, 28, 56–74. https://doi.org/10.1108/JMTM-01-2016-0001.
Kuhnstoff. (2012). About 80% weight reduction compared to conventional gripper with same holding force More than 30% cost advantage due to additive manufacturing and optimized design [WWW Document]. http://www.kuhn-stoff.de/fileadmin/benutzerdaten/kuhn-stoff-de/pdf/downloads/Bronchialgreifer_Diodenklemme.pdf.
Lyons, B. (2011). Additive manufacturing in aerospace: Examples and research outlook [WWW Document]. Boeing. https://doi.org/10.1016/S0026-0657(14)70250-4.
Mellor, S., Hao, L., & Zhang, D. (2014). Additive manufacturing: A framework for implementation. International Journal of Production Economics, 149, 194–201. https://doi.org/10.1016/j.ijpe.2013.07.008.
Moore, J. F. (1993). Predators and prey: A new ecology of competition. Harvard Business Review, 71, 75–86.
Oettmeier, K., & Hofmann, E. (2016). Additive manufacturing technology adoption: An empirical analysis of general and supply chain-related determinants. Journal of Business Economics, 1, 1–28. https://doi.org/10.1007/s11573-016-0806-8.
Renda, V. (2015). European additive manufacturing strategy. Brussels/Belgium.
Rogers, E. M. (2002). The nature of technology transfer. Science Communication, 23, 323–341. https://doi.org/10.1177/107554700202300307.
Rosen, D. W. (2014). Research supporting principles for design for additive manufacturing. Virtual and physical prototyping, 9, 225–232. https://doi.org/10.1080/17452759.2014.951530.
Schroder, M., Falk, B., & Schmitt, R. (2015). Evaluation of cost structures of additive manufacturing processes using a new business model. Procedia CIRP, 30, 311–316. https://doi.org/10.1016/j.procir.2015.02.144.
Tang, Y., & Zhao, Y. F. (2016). A survey of the design methods for additive manufacturing to improve functional performance. Rapid Prototyping Journal, 22, 569–590. https://doi.org/10.1108/RPJ-01-2015-0011.
Valckenaers, P. (Paul), & van Brussel, H. (2015). Design for the unexpected: From holonic manufacturing systems towards a humane mechatronics society (1st ed.). Elsevier Ltd.
Wohlers, T. (2015). Additive manufacturing and 3D printing State of the Industry.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer International Publishing AG, part of Springer Nature
About this chapter
Cite this chapter
Flores Ituarte, I., Kretzschmar, N., Chekurov, S., Partanen, J., Tuomi, J. (2019). Additive Manufacturing Validation Methods, Technology Transfer Based on Case Studies. In: Pei, E., Monzón, M., Bernard, A. (eds) Additive Manufacturing – Developments in Training and Education. Springer, Cham. https://doi.org/10.1007/978-3-319-76084-1_7
Download citation
DOI: https://doi.org/10.1007/978-3-319-76084-1_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-76083-4
Online ISBN: 978-3-319-76084-1
eBook Packages: EngineeringEngineering (R0)