Arc Welding of Zinc Coated High Strength Steels

  • Tibor Pogonyi
  • Béla Palotás
  • Levente Bakos
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)


In the automotive industry advanced high strength steels (for example: DP, CP, TRIP, TWIP) are used for different applications on the body or on the chassis. The most commonly used jointing technologies in the automotive production are the arc welding processes. By using conventional welding technologies problems can occur. Using conventional welding on coated (galvanized) plates usually damages the coating. The consequence of this damage will be corrosion and extra maintenance costs. To solve this problem low heat-input process variants can be applied. They can be e.g. Cold-Arc, SpeedARC, forceArc, CMT, Cold Weld, microMIG, microMIG-cc, and other advanced welding processes. These are controlled short circuit material transition processes. We investigated the Cold Weld, microMIG and microMIG-cc processes when welding zinc coated high strength steel plates. The microMIG-cc and Cold Weld processes were found well applicable for the coated plates. This paper describes those welding possibilities of these plates which will not be damaged the coating on the other side of the weld.



The research work was supported by the Hungarian Scientific Research Office grants GINOP 2.1.1.


  1. 1.
    Paszternák, L.: Low temperature brazing. Accessed 30 Dec (2017)
  2. 2.
    Nyári, P., Mohácsi, G., Palotás, B., Mester, M.: Arc brazing of galvanised structure elements. (In Hungarian) Hegesztéstechnika, XVI.évf. 2005/1, pp. 20–23 (2005)Google Scholar
  3. 3.
    Joaquin, A., Elliott, A., Jiang, C., Rajan, V. et al.: Gas Metal Arc Welding of Coated Advanced High Strength Steel (AHSS) - Developments for Improved Weld Quality. SAE Technical Paper 2007-01-1360 (2007)Google Scholar
  4. 4.
  5. 5.
  6. 6.
  7. 7.
    Shoeb, M., Parvez, M., Kumari, P.: Effect of MIG welding input process parameters on weld bead geometry on HSLA steel. Int. J. Eng. Sci. Technol. 5(1), 200–212 (2013)Google Scholar

Copyright information

© Springer International Publishing AG, part of Springer Nature 2018

Authors and Affiliations

  1. 1.University of DunaújvárosDunaújvárosHungary

Personalised recommendations