Abstract
This study discusses the model updating performed on a two-story reinforced-concrete masonry-infilled building using the dynamic response obtained during ambient vibration measurements. Five infills were demolished at four stages creating four damage states. The numerical model of the building is developed based on the obtained material properties and geometry. The model updating process minimizes a target function defined as the least-square optimization of an inverse eigenvalue problem. The reference model is then updated using the experimental results in each stage of damage to assess the damage. The dynamic properties obtained from the updated model match well their experimentally-estimated counterparts. Also, the model can reliably locate the damage introduced to the structure.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Doebling, S.W., Farrar, C.R., Prime, M.B., Shevitz, D.W.: Damage identification and health monitoring of structural and mechanical systems from changes in their vibration characteristics: a literature review. Report, Los Alamos National Laboratory, Los Alamos, NM, USA (1996)
Sohn, H., Farrar, C.R., Hemez, F.M., et al.: A review of structural health monitoring literature: 1996–2001. Report, Los Alamos National Laboratory, Los Alamos, NM, USA (2003)
Song, M., Yousefianmoghadam, S., Mohammadi, M.E., Moaveni, B., Stavridis, A., Wood, R.L.: An application of finite element model updating for damage assessment of a two-story reinforced concrete building and comparison with lidar. Structural Health Monitoring. (2018). https://doi.org/10.1177/1475921717737970
Yousefianmoghadam, S., Song, M., Stavridis, A., Moaveni, B.: System identification of a two-story infilled RC building at different damage states. In: 2nd ATC-SEI Conference on Improving the Seismic Performance of Existing Buildings and other Structures, San Francisco (2015)
Martin Tempestti, J., Stavridis, A.: Simplified method to assess the lateral resistance of infilled reinforced concrete frames. In: Proceedings of 16th World Conference in Earthquake Engineering, Santiago, Chile (2017)
Tondi, M., Bovo, M., Bassoli, E., Vincenzi, L., Savoia, M.: Identificazione della Rigidezza dei Tamponamenti in Strutture Intelaiate Mediante Analisi Inversa. In: ANIDIS Conference, Pistoia, Italy (2017)
Vincenzi, L., Savoia, M.: Coupling response surface and differential evolution for parameter identification problems. Comput. Aided Civ. Infrastruct. Eng. 30, 376–393 (2015)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 The Society for Experimental Mechanics, Inc.
About this paper
Cite this paper
Tondi, M., Yousefianmoghadam, S., Stavridis, A., Moaveni, B., Bovo, M. (2019). Model Updating and Damage Assessment of a RC Structure Using an Iterative Eigenvalue Problem. In: Pakzad, S. (eds) Dynamics of Civil Structures, Volume 2. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-319-74421-6_47
Download citation
DOI: https://doi.org/10.1007/978-3-319-74421-6_47
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-74420-9
Online ISBN: 978-3-319-74421-6
eBook Packages: EngineeringEngineering (R0)