Abstract
In the chapter, the problems of heat transport in the agitated vessels, equipped with a jacket or coil, are analysed on the basis of our own and literature results of the studies. Different measurement methods of mean and local heat transfer coefficients were described. The results of the experimental studies on the heat transfer coefficient in agitated vessels of different geometry were compared and discussed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Bielka I, Cudak M, Karcz J (2014) Local heat transfer process for a gas–liquid system in a wall region of an agitated vessel equipped with the system of CD 6-RT impellers. Ind Eng Chem Res 53:16539–16549
Cudak M, Karcz J (2008) Distribution of local heat transfer coefficient values in the wall region of an agitated vessel. Chem Pap 62(1):92–99
Karcz J (1991) Influence of geometry of the pitched blade turbine upon power consumption and intensity of heat transfer. Inż Chem Proc 12(1):47–61
Karcz J (1999) Studies of local heat transfer in a gas–liquid system agitated by double disc turbines in a slender vessel. Chem Eng J 72:217–227
Karcz J, Cudak M (2002) Efficiency of the heat transfer process in a jacketed agitated vessel equipped with an eccentrically located impeller. Chem Pap 56(6):382–386
Karcz J, Cudak M (2004) Eksperymentalna analiza procesów przenoszenia w mieszalniku z niecen trycznie zabudowanym mieszadłem. Inż Chem i Proc 25(3/2):1067–1073
Karcz J, Cudak M (2006) Analysis of transport processes near the wall region of a stirred tank with an eccentric impeller. Chem Process Eng 27:1469–1480
Karcz J, Major M (2001) Experimental studies of heat transfer in an agitated vessel equipped with vertical tubular coil. Inż Chem i Proc 22:445–459
Karcz J, Stręk F (1994) Experimental studies of heat transfer for a stirred tank equipped with two turbines. Inż Chem Proc 15(3):357–369 (in Polish)
Karcz J, Stręk F (1995) Heat transfer in jacketed agitated vessels equipped with non-standard baffles. Chem Eng J 58(2):135–143
Karcz J, Cudak M, Szoplik J (2005) Stirring of a liquid in a stirred tank with an eccentrically located impeller. Chem Eng Sci 60(8–9):2369–2380
Kurpiers P (1985) Waermeuebergang in Ein- und Merhphasenreaktoren. VCH, Weinheim
Major M (2000) Studies of heat transfer from vertical tubular coil into the pseudoplastic liquid mixed in an agitated vessel. In: Ph.D. Thesis, Technical University of Szczecin, Poland
Michalska M (2001) Heat transfer in an agitated vessel equipped with tubular vertical coil and high–speed impeller. In: Ph.D. Thesis, Technical University of Szczecin, Poland
Mohan P, Emery AN, Al-Hassan T (1992) Heat transfer to Newtonian fluids in mechanically agitated vessels. Exp Therm Fluid Sci 5:861–883
Nagata S (1975) Mixing. Principles and applications. Halsted Press, New York
Oldshue JY (1983) Fluid mixing technology. McGraw-Hill Publication, New York
Poggeman R, Steiff A, Weinspach PM (1979) Waermeuebergang in Ruehrkesseln mit einphasigen Fluessigkeiten. Chem Ing Techn 51(10):948–959
Steiff A, Poggeman R, Weinspach PM (1980) Waermeuebergang in Ruehrkesseln mit mehrphasigen Systemen. Chem Ing Techn 52(6):492–503
Stręk F (1963) Heat transfer in liquid mixers—study of a turbine agitator with six flat blades. Intern Chem Eng 3(3):533–556
Stręk F (1981) Mixing and Agitated Vessels. WNT, Warsaw
Stręk F, Karcz J (1985) Heat transfer in a baffled vessel agitated by a disc turbine impeller. Inż Chem Proc 6(1):133–146
Stręk F, Karcz J (1991) Experimental determination of the optimal geometry of baffles for heat transfer in an agitated vessel. Chem Eng Process 29(3):165–172
Stręk F, Karcz J (1997) Heat transfer to Newtonian fluid in a stirred tank—a comparative experimental study for vertical tubular coil and a jacket. Recents Prog en Genie des Procedes 51(11):105–112
Stręk F, Karcz J, Lacki H (1987) Problems of a scale—up of agitated vessels. Inż Chem Proc 8(4):601–615
Stręk F, Karcz J, Bujalski W (1990) Search for optimal geometry of a conical turbine agitator for heat transfer in stirred vessels. Chem Eng Technol 13(6):384–392
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Cudak, M., Major-Godlewska, M., Karcz, J. (2018). Problems of Heat Transfer in Agitated Vessels. In: Ochowiak, M., Woziwodzki, S., Doligalski, M., Mitkowski, P. (eds) Practical Aspects of Chemical Engineering. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-73978-6_3
Download citation
DOI: https://doi.org/10.1007/978-3-319-73978-6_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-73977-9
Online ISBN: 978-3-319-73978-6
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)