Abstract
The development of ferrous metallurgy, the growth of the capacity of blast furnaces (BF) and increased ore consumption required the creation of technology for the agglomeration of natural and fine anthropogenic materials generated during the course of the entire process from iron ore extraction through to iron smelting. The first industrial agglomeration technology, which appeared back in the nineteenth century, was briquetting technology—production of lumps of regular geometric shapes from iron ore fines by applying pressure using different binders or without them, with further drying and firing or curing under natural conditions.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Pietsch, W.: Agglomeration in Industry Occurrence and Applications, 375p. Wiley, New York (2005)
Yuzbashev, L.: Method for the preparation of artificial lumpy ore and artificial lumpy fuel from fines of ores and fossil fuels. Min. J. 2(6), 257–288 (1901)
Blast Furnace Process.: Reference Guide. V.1. Moscow. State Scientific and Technical Publishing House of Literature on Ferrous and Non-Ferrous Metallurgy, 647p. (1963)
Steele, R.B.: Agglomeration of steel mill by-products via auger extrusion. In: Proceedings of 23rd Biennial Conference, pp. 205–217. IBA, Seattle, WA, USA (1993)
BREX.: Certificate of trademark (service mark) No. 498006, application No. 2012706053 of 02.03.2012. Right holder A.M. Bizhanov
Koizumi, H., Yamaguchi, A., Doi, T., Noma, F.: Fundamental development of iron ore briquetting technology. Tetsu to Hagane 74(6), 962 (1988)
Matsui, Y., Sawayama, M., Kasai, A., Yamagata, Y., Noma, F.: Reduction behavior of carbon composite iron ore hot briquette in shaft furnace and scope on blast furnace performance reinforcement. ISIJ Int. 43, 1904 (2003)
Ravich, B.M.: Briquetting in Non-Ferrous and Ferrous Metallurgy, p. 232. Metallurgy, Moscow (1975)
Astakhov, A.G., Machkovskiy, A.I., Nikitin, A.I., et al.: Agglomerant’s Reference Guide, p. 448. Technics, Kiev (1964)
Torok, J.: Briquetting for the steel industry: then and now. In: 32nd Biennale Conference of the Institute for Briquetting and Agglomeration, p. 20. Curran Associates (2013), 25–28 Sept 2011
Schwelberger, J., Brunner, C.H., Fleischanderl, A.: Recycling of ferrous by-products in the iron and steel. In: 34th Biennale Conference of the Institute for Briquetting and Agglomeration. Curran Associates (2013), 8–11 Nov 2015
Khazanova, T.P.: Production of manganese alloys from poor oxide and carbonate ores. In: Khazanova, T.P., Shirer, G.B., Lyakishev, N.P. (eds.) Development of Ferroalloy Industry in USSR, p. 122. Kiev (1961)
Khvichiya, A.P., Mazmishvili, S.M.: Silicomanganese smelting from ore briquettes in furnace with capacity of 16.5 MVA. Steel 2, 138 (1970)
Sukhorukov, A.I., Sosedko, P.M., Khitrik, S.I.: Steel 2, 135 (1970)
Mazmishvili, S.M.: Development and commercial exploitation of technologies for production of dust ore briquettes and smelting manganese ferroalloys from them. In: Mazmishvili, S.M., Simongulashvili, Z.A. (eds.) News of Higher Institutions, vol. 12, p. 43 (1992)
Guzman, I.Y. (ed.): Chemical Technology of Ceramics. Manual for Higher Institutions—Moscow: OOO RIF Stroimaterialy, 496p. Advertising and Publishing Firm Construction Materials, LLC (2003)
Kurunov, I.F., Bolshakova, O.G., Shcheglov, E.M., et al.: Metallurgist 6, 36–39 (2007)
De Bruin, T., Sundqvist, L.: ICSTI/Ironmaking Conference Proceedings, pp. 1263–1273 (1998)
Paananen, T., Pisilä, E.: Improved raw material efficiency in hot metal production, pp. 1–8. METEC-ESTAD, Düsseldorf (2015)
Sharma, T., et al.: Effect of porosity on the swelling behaviour of iron ore pellets and briquettes. ISIJ Int. 31, 312 (1991)
Sharma, T., et al.: Effect of reduction rate on the swelling behaviour of iron ore pellets. ISIJ lnt. 32, 812 (1992)
Sharma, T.: Swelling of iron ore pellets under non-isothermal condition. ISIJ lnt. 32, 960 (1994)
Singh, M., Bjorkman, B.: Cold bond agglomerates of iron and steel plant by-products as burden material for blast furnaces. In: Proceedings of REWAS 99: Global Symposium on Recycling, Waste Treatment and Clean Technology, San Sebastian, Spain, vol. 2, pp. 1539–1548 (1999)
Nicolle, R., Rist, A.: The mechanism of whisker growth in the reduction of wüstite. Metall. Trans. B 10, 429 (1979)
Kempainen, A., Iljana, M., Heikkinen, E.-P., Paananen, T., Mattila, O., Fabritius, T.: ISIJ Int. 54, 1539 (2014)
Titov, V.V., Murat, S.G., Kiselev, N.I.: The use of recycled materials in the charge of blast furnaces. Ecol. Ind. 1, 16–21 (2007)
Kurunov, I.F., Kanaeva, O.G.: Briquetting is New Stage in Development of Technology for Sintering Raw Materials for Blast Furnaces, vol. 5, pp. 27–32. Bulletin of Scientific and Technical and Economic Information “Ferrous Metallurgy” (2005)
Kurunov, I.F., Shcheglov, E.M., Kononov, A.I., Bolshakova, O.G. et al.: Investigation of Metallurgical Properties of Briquettes from Technogenic and Natural Raw Materials and Assessment of Effectiveness of Their Application in Blast Furnace Smelting. Part 1, vol. 12, pp. 39–48. Bulletin of Scientific and Technical and Economic Information “Ferrous Metallurgy” (2007)
Kurunov, I.F., Shcheglov, E.M., Kononov, A.I., Bolshakova, O.G., et al.: Investigation of Metallurgical Properties of Briquettes from Technogenic and Natural Raw Materials and Assessment of Effectiveness of Their Application in Blast Furnace Smelting. Part 1, vol. 1, pp. 8–16. Bulletin of Scientific and Technical and Economic Information “Ferrous Metallurgy” (2008)
Kurunov, I.F., Malysheva, T.Y., Bolshakova, O.G.: Investigation of Phase Composition of Iron-Ore Briquettes in Order to Assess Their Behavior in Blast Furnace, vol. 10, pp. 41–46. Metallurgist (2007)
Sergeant, R., Onte, L., Huysse, K., et al.: Sergeant R. Heart management at Sidmar for an Optimal Hot Metal and Slag Evacuation, vol. 2. The 5th European Coke and Ironmaking Congress, Stockholm (2005)
Tupkary, R.H., Tupkary, V.R.: An Introduction to Modern Iron Making. Khanna Publishers, Delhi (2013)
Ozhogin, V.V.: Foundations of Theory and Technology of Briquetting of Pulverized Metallurgical Raw Materials: Monograph, 442 p. PGTU, Mariupol (2010)
Bizhanov, A.M., Kurunov, I.F., Podgorodetskiy, G.S., et al.: Extrusion Briquettes (Brex) for Ferroalloys Production, vol. 12, p. 52. Metallurgist (2012)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this chapter
Cite this chapter
Kurunov, I., Bizhanov, A. (2018). Introduction. In: Stiff Extrusion Briquetting in Metallurgy. Topics in Mining, Metallurgy and Materials Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-72712-7_1
Download citation
DOI: https://doi.org/10.1007/978-3-319-72712-7_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-72711-0
Online ISBN: 978-3-319-72712-7
eBook Packages: EngineeringEngineering (R0)