Abstract
Aluminium alloy 6063 pipe sections were friction stir welded to produce a sound joining. In this present study, the full weld cycle of heat input will be gathered for rotational speed ranging between 1000 and 1600 rpm and travel speed between 3 and 5 mm/s. There will be 5 specimens to be friction stir welded. It was found that, the heat input will be increased with the increment of rotational speed up to 396 °C and decreased with the increment of travel speed with a minimum of 221 °C. These conditions were recorded by utilizing K-type thermocouples and the Signal Express software with a National Instrument model cDAQ-9171 data logger.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Abnar, B., Kazeminezhad, M., Kokabi, A.H.: Effects of heat input in friction stir welding on microstructure and mechanical properties of AA3003-H18 plates. Trans. Nonferrous Met. Soc. China 25, 2147–2155 (2015)
Threadgill, P.L., Leonard, A.J., Shercliff, H.R., Withers, P.J.: Friction stir welding of aluminium alloys [J]. Int. Mater. Rev. 54(13–14), 49–93 (2009)
Mishra, R.S., Mahoney, M.W.: Friction stir welding and processing. ASM International (2007)
Mishra, R.S., Ma, Z.Y.: Friction stir welding and processing. Mater. Sci. Eng. R 50, 1–78 (2005)
Liu, H.J., Fujii, H., Nogi, K.: Tensile properties of a friction stir welded thin-sheet of 1050-H24 aluminum alloy. Charact. Control of Interfaces for High Qual. Adv. Mater. 146, 129–136 (2006)
Lammlein, D.H., Gibson, B.T., DeLapp, D.R., Cox, C., Strauss, A.M., Cook, G.E.: The friction stir welding of small-diameter pipe: an experimental and numerical proof of concept for automation and manufacturing. Proc. Inst. Mech. Eng. Part B J. Eng. Manuf. 226, 1–16 (2012)
Ismail, A., Awang, M., Samsudin, S.H., Rojan, M.A., Jasri, M.A.H.M.: The hardness variation due to secondary heating in friction stir welding of small diameter aluminium alloy 6063 pipe. Mach. Joining and Modifications of Adv. Mater. Adv. Struct. Mater. 61, 87–94 (2016)
Khourshid, A.M., Sabry, I.: Friction stir welding study on aluminum pipe. Int. J. Mech. Eng. Rob. Res. 2(3), 31–339 (2013)
Ismail, A., Awang, M., Rojan, M.A., Samsudin, S.H.: The characteristic of temperature curves for friction stir welding of aluminium alloy 6063-t6 pipe during tool plunging stage. ARPN J. Eng. Appl. Sci. 11(1), 277–280 (2016)
Acknowledgements
The authors thanked Majlis Amanah Rakyat (MARA) for fund provided. The research facilities provided by Universiti Teknologi PETRONAS and Universiti Kuala Lumpur (MIMET) were greatly acknowledged.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this chapter
Cite this chapter
Ismail, A. et al. (2018). The Mapping of Full Weld Cycle Heat Profile for Friction Stir Welding Pipe Butt Joints. In: Öchsner, A. (eds) Engineering Applications for New Materials and Technologies . Advanced Structured Materials, vol 85. Springer, Cham. https://doi.org/10.1007/978-3-319-72697-7_38
Download citation
DOI: https://doi.org/10.1007/978-3-319-72697-7_38
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-72696-0
Online ISBN: 978-3-319-72697-7
eBook Packages: EngineeringEngineering (R0)