Abstract
Hot Thermocouple Technology has been developed and approved to be a novel method to study the high-temperature related properties of molten slag. In this study, it will first give the development of Hot Thermocouple Technology, and its typical application to the mold flux. One example of crystallization process of the mold flux for casting low carbon (LC flux) and medium carbon steels (MC flux) were investigated by using Double Hot Thermocouple Technology (DHTT). The results of LC flux showed that, the glass phase firstly formed at the low temperature side; then, the fine crystals precipitated at the liquid/glass interface and grew toward glass and later on to liquid phase. However, the crystals directly formed at the low temperature side when MC flux was under cooling process and grew toward the high temperature side; which indicated the crystallization ability of MC flux was stronger than LC flux. Another crystallization sample of CaO-SiO2-B2O3 based fluoride-free mold flux (F-free flux) was studied by using Single Hot Thermocouple Technology (SHTT), and the results showed the crystals first precipitated in the middle of sample and moved toward the thermocouple side, then the precipitated crystals grew up and new crystals formed in the middle of sample and moved toward the side, until the crystallization was completed and reached a steady state; the crystallization mechanism of the F-free flux was 1-dimensional growth.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Zhou LJ, Wang WL et al (2012) A kinetic study of the effect of basicity on the mold fluxes crystallization. Metall Mater Trans B 43(2):354–362
Mills KC, Fox AB, Li Z, Thackray RP (2005) Performance and properties of mould fluxes. Ironmak Steelmak 32(1):26–34
Wang WL, Cramb AW (2005) The observation of mold flux crystallization on radiative heat transfer. ISIJ Int 45(12):1864–1870
Yamauchi A, Sorimachi K, Sakuraya T, Fujii T (1993) Heat transfer between mold and strand through mold flux film in continuous casting of steel. ISIJ Int 33(1):140–147
Li C, Thomas BG (2004) Thermomechanical finite-element model of shell behavior in continuous casting of steel. Metall Mater Trans B 35(6):1151–1172
Sridhar S, Mills KC, Mallaband ST (2002) Powder consumption and melting rates of continuous casting fluxes. Ironmak Steelmak 29(3):194–198
Gu K, Wang WL, Zhou LJ et al (2012) The effect of basicity on the radiative heat transfer and interfacial thermal resistance in continuous casting. Metall Mater Trans B 43(4):937–945
Wang WL, Cramb AW (2010) Study of the effects of the mold surface and solid mold flux crystallization on radiative heat transfer rates in continuous casting. Steel Res Int 81(6):446–452
Wei J, Wang WL et al (2014) Effect of Na2O and B2O3 on the crystallization behavior of low fluorine mold fluxes for casting medium carbon steels. Metall Mater Trans B 45(2):643–652
Hering L, Heller HP, Fenzke HW (1992) Investigations for flux power selection in slab continuous-casting. Stahl Und Eisen 112(8):61–65
Sakai H, Kawashima T, Shiomi T, Watanabeand K, Iida T (1997) Molten the interface. In: The final step involves the dissolution of the Slags, Slags and Salts’97 Conference, Warrendale, PA
Bhamra M, Charlesworth M, Wong S, Sawyers VD, Cramb AW (1996). In: 54th Electric Furnace Conference, Dallas, TX, 9–12 Dec 1996
Ordway F (1952) Techniques for growing and mounting small single crystals of refractory compounds. National Bureau of Standards
Welch JH (1954) A simple microscope attachment for observing high-temperature phenomena. J Sci Instrum 31(12):458
Kuranaga T, Kashiwaya Y, Ishii K (1995). In: International Symposium on Advanced Materials and Technology for 2lst Century. JIM’95 Fall Meeting. Honolulu
Scholze H (1991) Glass: Nature. Structure and properties. Springer, Berlin
Uhlman DR (1983) Glass formation, a contemporary view. J Am Ceram Soc 66(2):95–100
Kashiwaya Y, Cicutti CE et al (1998) Development of double and for in situ observation and single hot thermocouple technique measurement of mold slag crystallization. ISIJ Int 38(4):348–356
Kashiwaya Y, Cicutti CE, Cramb AW (1998) An investigation of the crystallization of a continuous casting mold slag using of the single hot thermocouple technique. ISIJ Int 38(4):357–365
Zhou LJ, Wang WL, Huang DY et al (2012) In situ observation and investigation of mold flux crystallization by using double hot thermocouple technology. Metall Mater Trans B 43(4):925–936
Sun NX, Liu XD, Lu K (1996) An explanation to the anomalous avrami exponent. Scripta Mater 34:1201–1207
Wang WL (2007) PhD thesis, Carnegie Mellon University
Christian JW (2002) The theory of transformations in metals and alloys, 3rd edn. Pergamon Press Ltd, London, UK
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Zhang, L., Wang, W., Zhou, L. (2018). Current State Art of Hot Thermocouple Technology—Novel Way for the Study of Mold Flux High-Temperature Properties. In: & Materials Society, T. (eds) TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings. TMS 2018. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-319-72526-0_19
Download citation
DOI: https://doi.org/10.1007/978-3-319-72526-0_19
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-72525-3
Online ISBN: 978-3-319-72526-0
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)