Abstract
Predicting flow stress at high strain-rates is a desirable practice for material behavior characterization. Sub-grain size has shown a huge influence in cutting forces and the workpiece surface finish determination during orthogonal cutting process. Hence, a prediction of flow stress as a function of thermomechanical conditions and sub-grain size is of great important which is studied in this work for OFHC copper. The principal thermomechanical conditions being strain, strain-rate and the accompanying temperature rise are characterized in Plane Strain Machining (PSM) and the resulting microstructure, sub-grain size, is quantified. Material maximum flow stress (a constitutive model) as a function of thermomechanical conditions and sub-grain size is predicted considering a saturated state in microstructure using optimization algorithms for reaching the validated temperature rise based on modified Hahn’s model. Evaluated models suggest a major influence of strain-rate and dislocation in temperature rise estimation and flow stress prediction leading to consideration of mechanical failure phenomenon involved in machining-based manufacturing processes.
Keywords
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Denguir LA, Outeiro JC, Fromentin G, Vignal V, Besnard R (2016) Orthogonal cutting simulation of OFHC copper using a new constitutive model considering the state of stress and the microstructure effects. Procedia CIRP 46:238–241
Rahman MA, Rahman M, Kumar AS (2017) Modelling of flow stress by correlating the material grain size and chip thickness in ultra-precision machining. Int J Mach Tools Manuf 123:57–75
Shekhar S, Abolghasem S, Basu S, Cai J, Shankar MR (2012) Effect of severe plastic deformation in machining elucidated via rate-strain-microstructure mappings. J Manuf Sci Eng 134(3):31008
Abolghasem S, Basu S, Shekhar S, Cai J, Shankar MR (2012) Mapping subgrain sizes resulting from severe simple shear deformation. Acta Mater 60(1):376–386
Basu S, Abolghasem S, Shankar MR (2013) Mechanics of intermittent plasticity punctuated by fracture during shear deformation of Mg alloys at near-ambient temperatures. Metall Mater Trans A Phys Metall Mater Sci 44(10):4558–4566
Abolghasem S, Basu S, Shankar MR (2013) Quantifying the progression of dynamic recrystallization in severe shear deformation at high strain rates. J Mater Res 28(15):2056–2069
Shekhar S, Cai J, Basu S, Abolghasem S, Shankar MR (2011) Effect of strain rate in severe plastic deformation on microstructure refinement and stored energies. J Mater Res 26(3):395–406
Journal of Theoretical and Applied Mechanics (2013) Development of a thermal model in the metal cutting, pp 553–567
Komanduri R, Hou ZB (2000) Thermal modeling of the metal cutting process Part I—temperature rise distribution due to shear plane heat source. Int J Mech Sci 42(9):1715–1752
Kapoor R, Nemat-Nasser S (1998) Determination of temperature rise during high strain rate deformation. Mech Mater 27:1–12
Zerilli FJ (2004) Dislocation mechanics-based constitutive equations. Met Mater Trans A 35(9):2547–2555
Zerilli FJ, Armstrong RW (1987) Dislocation-mechanics-based constitutive relations for material dynamics calculations. J Appl Phys 61(5):1816–1825
Mahadevan D (2007) Experimental determination of velocity and strain rate fields in metal cutting of OFHC copper
Denguir LA, Outeiro JC, Fromentin G, Vignal V, Besnard R (2017) A physical-based constitutive model for surface integrity prediction in machining of OFHC copper. J Mater Process Technol 248(April):143–160
Hernandez C, Maranon A, Ashcroft IA, Casas-Rodriguez JP (2012) Inverse methods for the mechanical characterization of materials at high strain rates, vol. 4022. Freiburg, Germany, pp. 1–6
Lemaitre J, Desmorat R (2005) Engineering Damage Mechanics. Springer, Berlin
Acknowledgements
In this study, we acknowledge the funding support from Colciencias grant code 120474557650 and the 2017 grant from school of engineering at Universidad de los Andes, Bogotá, Colombia.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Osorio, J.C., Abolghasem, S., Rodriguez, J.P.C. (2018). Determination of Microstructure-Based Constitutive Models Using Temperature Rise Distribution in Plane Strain Machining. In: Li, B., et al. Characterization of Minerals, Metals, and Materials 2018 . TMS 2018. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-319-72484-3_25
Download citation
DOI: https://doi.org/10.1007/978-3-319-72484-3_25
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-72483-6
Online ISBN: 978-3-319-72484-3
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)