Advertisement

Biomimetics pp 327-427 | Cite as

Adaptable Fabrication Techniques for Mechanically Durable Superliquiphobic/philic Surfaces

  • Bharat BhushanEmail author
Chapter
Part of the Springer Series in Materials Science book series (SSMATERIALS, volume 279)

Abstract

Superliquiphobic and superliquiphilic surfaces have attracted interest within the scientific community and industry for various applications such as self-cleaning, anti-icing, anti-fogging, anti-fouling, finger print resistance, and drag reduction. The surfaces should be wear resistant. For some applications, such as oil-water separation, surfaces with a combination of water and oil repellency and affinity are required.

References

  1. Aoki, T., Furuya, S., and Kinoshita, H. (2005), “Finger-tapping Ability in Male and Female Pianists and Nonmusician Controls,” Motor Control 9, 23–39.CrossRefGoogle Scholar
  2. Baletto, F. and Ferrando, R. (2005), “Structural Properties of Nanoclusters: Energetic, Thermodynamic, and Kinetic Effects,” Rev. Mod. Phys. 77, 371–423.CrossRefGoogle Scholar
  3. Bayat, A., Aghamiri, S., Moheb, A., and Vakili-Nezhaad, G. R. (2015), “Oil Spill Cleanup from Sea Water by Sorbent Materials,” Chem. Eng. Technol. 28, 1525–1528.CrossRefGoogle Scholar
  4. Bellanger, H., Darmanin, T. and Guittard, F. (2012), “Surface Structuration (Micro and/or Nano) Governed by the Fluorinated Tail Lengths toward Superoleophobic Surfaces,” Langmuir 28, 186–192.CrossRefGoogle Scholar
  5. Bhushan, B. (2013), Introduction to Tribology, second ed., Wiley, New York.CrossRefGoogle Scholar
  6. Bhushan, B. (2016), Biomimetics: Bioinspired Hierarchical-Structured Surfaces for Green Science and Technology, second ed., Springer International, Cham, Switzerland.Google Scholar
  7. Bhushan, B. (2017a), Springer Handbook of Nanotechnology, fourth ed., Springer International, Cham, Switzerland.Google Scholar
  8. Bhushan, B. (2017b), Nanotribology and Nanomechanics – An Introduction, fourth ed., Springer International, Cham, Switzerland.Google Scholar
  9. Bhushan, B. and Gupta, B. K. (1991), Handbook of Tribology: Materials, Coatings and Surface Treatments, McGraw-Hill, New York.Google Scholar
  10. Bhushan, B. and Jung, Y. C. (2011), “Natural and Biomimetic Artificial Surfaces for Superhydrophobicity, Self-Cleaning, Low Adhesion, and Drag Reduction,” Prog. Mater. Sci. 56, 1–108.CrossRefGoogle Scholar
  11. Bhushan, B. and Martin, S. (2018), “Substrate-independent Superliquiphobic Coatings for Water, Oil, and Surfactant Repellency: An Overview,” J. Colloid Interface Sci. 526, 90–105.CrossRefGoogle Scholar
  12. Bhushan, B. and Muthiah, P. (2013), “Anti-Smudge Screening Apparatus for Electronic Touch Screens,” Microsyst. Technol. 19, 1261–1263.CrossRefGoogle Scholar
  13. Bixler, G. D., Theiss, A., Bhushan, B. and Lee, S. C. (2014), “Anti-fouling Properties of Microstructured Surfaces Bio-inspired by Rice Leaves and Butterfly Wings,” J. Colloid Interface Sci. 419, 114–133.CrossRefGoogle Scholar
  14. Brown, P. S. (2016), Personal communication.Google Scholar
  15. Brown, P. S. and Bhushan, B. (2015a), “Mechanically Durable, Superoleophobic Coatings Prepared by Layer-by-Layer Technique for Anti-smudge and Oil-water Separation,” Sci. Rep. – Nature 5, 8701.Google Scholar
  16. Brown, P. S. and Bhushan, B. (2015b), “Mechanically Durable, Superomniphobic Coatings Prepared by Layer-by-Layer Technique for Self-cleaning and Anti-smudge,” J. Colloid Interface Sci. 456, 210–218.CrossRefGoogle Scholar
  17. Brown, P. S. and Bhushan, B. (2015c), “Bioinspired, Roughness-Induced, Water and Oil Super-philic and Super-phobic Coatings Prepared by Adaptable layer-by-Layer Technique,” Sci. Rep. – Nature 5, 14030.Google Scholar
  18. Brown, P. S. and Bhushan, B. (2016a), “Designing Bioinspired Superoleophobic Surfaces,” APL Materials 4, 015703.CrossRefGoogle Scholar
  19. Brown, P. S. and Bhushan, B. (2016b), “Durable, Superoleophobic Polymer-nanoparticle Composite Surfaces with Re-entrant Geometry via Solvent-induced Phase Transformation,” Sci. Rep. – Nature 6, 21048.Google Scholar
  20. Brown, P. S. and Bhushan, B. (2016c), “Durable, Superoleophobic Polypropylene Surfaces,” Phil. Trans. R. Soc. A 374, 20160193.CrossRefGoogle Scholar
  21. Brown, P. S. and Bhushan, B. (2016d), “Bioinspired Materials for Water Supply and Management: Water Collection, Water Purification and Separation of Water from Oil,” Phil. Trans. R. Soc. A 374, 20160135.CrossRefGoogle Scholar
  22. Brown, P. S. and Bhushan, B. (2017a), “Liquid-impregnated Porous Polypropylene Surfaces for Liquid Repellency,” J. Colloid Interface Sci. 487, 437–443.CrossRefGoogle Scholar
  23. Brown, P.S. and Bhushan, B (2017b), “Mechanically Durable Liquid-impregnated Honeycomb Surfaces,” Sci. Rep. – Nature 7, 6083.Google Scholar
  24. Callister, W. D. and Rethwisch, D. G. (2013), Materials Science and Engineering – An Introduction, ninth ed., Wiley, New York.Google Scholar
  25. Campos, R., Guenthner, A. J., Meuler, A. J., Tuteja, A., Cohen, R. E., McKinley, G. H., Haddad, T. S. and Mabry, J. M. (2012), “Superoleophobic Surfaces Through Control of Sprayed-on Stochastic Topography,” Langmuir 28, 9834–9841.CrossRefGoogle Scholar
  26. Cao, L., Jones, A. K., Sikka, V. K., Wu, J. and Gao, D. (2009), “Anti-Icing Superhydrophobic Coatings,” Langmuir 25, 12444–12448.CrossRefGoogle Scholar
  27. Cebeci, F. Ç., Zhizhong, W., Zhai, L., Cohen, R. E., and Rubner, M. F. (2006), “Nanoporosity-Driven Superhydrophilicity: A Means to Create Multifunctional Antifogging Coatings,” Langmuir 22, 2856–2862.CrossRefGoogle Scholar
  28. Contreras, C. B., Chagas, G., Strumia, M. C., and Weibel, D. E. (2014), “Permanent superhydrophobic polypropylene nanocomposite coatings by a simple one-step dipping process,” Appl. Surf. Sci. 307, 234–240.CrossRefGoogle Scholar
  29. Cremaldi, J. and Bhushan, B. (2018), “Fabrication of Bioinspired, Self-Cleaning Superliquiphilic/phobic Stainless Steel Using Different Pathways,” J. Colloid Interface Sci. 518, 284–297.CrossRefGoogle Scholar
  30. Cui, Y., Paxson, A. T., Smyth, K. M., and Varanasi, K. K. (2012), “Hierarchical Polymeric Textures via Solvent-induced Phase Transformation: A Single-step Production of Large-area Superhydrophobic Surfaces,” Colloids Surf. A 394, 8–13.CrossRefGoogle Scholar
  31. Darmanin, T., Guittard, F., Amigoni, S., Tafin de Givenchy, E., Noblin, X., Kofman, R. and Celestini, F. (2011), “Superoleophobic Behavior of Fluorinated Conductive Polymer Films Combining Electropolymerization and Lithography,” Soft Matter 7, 1053–1057.CrossRefGoogle Scholar
  32. Das, A., Schutzius, T. M., Bayer, I. S. and Megaridis, C. M. (2012), “Superoleophobic and Conductive Carbon Nanofiber/Fluoropolymer Composite Films,” Carbon 50, 1346–1354.CrossRefGoogle Scholar
  33. Dave, D. and Ghaly, A. (2011), “Remediation Techniques for Marine Oil Spills: A Critical Review and Comparative Analysis,” Am. J. Environ. Sci. 7, 423–440.Google Scholar
  34. Deng, X., Mammen, L., Butt, H.-J. and Vollmer, D. (2012), “Candle Soot as a Template for a Transparent Robust Superamphiphobic Coating,” Science 335, 67–70.CrossRefGoogle Scholar
  35. Du, X., Li, X. and He, J. (2010), “Facile Fabrication of Hierarchically Structured Silica Coatings from Hierarchically Mesoporous Silica Nanoparticles and Their Excellent Superhydrophilicity and Superhydrophobicity” ACS Appl. Mater. Interfaces 2, 2365–2372.CrossRefGoogle Scholar
  36. Ebert, D. and Bhushan, B. (2012), “Transparent, Superhydrophobic, and Wear-Resistant Coatings on Glass and Polymer Substrates Using SiO2, ZnO, and ITO nanoparticles,” Langmuir 28, 11391–11399.CrossRefGoogle Scholar
  37. Edwards, O. and Marks, R. (1995), “Evaluations of Biomechanical Properties of Human Skin,” Clin. Dermatol. 13, 375–380.CrossRefGoogle Scholar
  38. Ellis, B. and Smith, R., Eds. (2008), Polymers: A Property Database, second ed., CRC Press.Google Scholar
  39. Erbil, H. Y., Demirel, A. L., Avci, Y., and Mert, O. (2003), “Transformation of a Simple Plastic into a Superhydrophobic Surface,” Science 299, 1377–1380.Google Scholar
  40. Etkin, D. S. and Welch, J. (1997) “Oil Spill Intelligence Report International Oil Spill Database: Trends in Oil Spill Volumes and Frequency,” Int. Spill Conf. 949–952.CrossRefGoogle Scholar
  41. Feng, L., Zhang, Z., Mai, Z., Ma, Y., Liu, B., Jiang, L. and Zhu, D. (2004), “A Super-Hydrophobic and Super-Oleophilic Coating Mesh Film for the Separation of Oil and Water,” Angew. Chem., Int. Ed. 43, 2012 − 2014.CrossRefGoogle Scholar
  42. Ferrari, E., Fabbri, P., and Pilati, F. (2011), “Solvent and Substrate Contributions to the Formation of Breath Figure Patterns in Polystyrene Films,” Langmuir 27, 1874–1881.CrossRefGoogle Scholar
  43. Fingas, M. (ed.), (2011), Oil Spill Science and Technology: Prevention, Response, and Cleanup, Elsevier, Amsterdam.Google Scholar
  44. Franco, J. A., Kentish, S. E., Perera, J. M., and Stevens G. W. (2008), “Fabrication of a superhydrophobic polypropylene membrane by deposition of a porous crystalline polypropylene coating,” J. Membr. Sci. 318, 107–113.CrossRefGoogle Scholar
  45. Goddard, E. D. (1986) “Polymer − Surfactant Interaction. Part II. Polymer and Surfactant of Opposite Charge,” Colloids Surf. 19, 301 − 329.Google Scholar
  46. Gogolides, E., Vlachopoulou, M., Tsoungeni, K., Vourdas, N., and Tserepi, A. (2010), “Micro and Nano Structuring and Texturing of Polymers Using Plasma Processes: Potential Manufacturing Applications,” Int. J. Nanomanuf. 6, 152–163.CrossRefGoogle Scholar
  47. Grosu, G., Andrzejewski, L., Veilleux, G. and Ross G. G. (2004), “Relation between the Size of Fog Droplets and Their Contact Angles with CR39 Surfaces,” J. Phys. D 37, 3350– 3355.CrossRefGoogle Scholar
  48. Han, D. and Steckl, A. J. (2009), “Superhydrophobic and Oleophobic Fibers by Coaxial Electrospinning,” Langmuir 25, 9454–9562.CrossRefGoogle Scholar
  49. Haynes, W. M. (2014), CRC Handbook of Chemistry and Physics 95th Ed., Taylor and Francis Group, Boca Raton, FL.Google Scholar
  50. Hsieh, C.-T., Chen, J.-M., Kuo, R.-R., Lin, T.-S. and Wu, C.-F. (2005), “Influence of Surface Roughness on Water- and Oil-Repellent Surfaces Coated With Nanoparticles,” Appl. Surf. Sci. 240, 318–326.CrossRefGoogle Scholar
  51. Hsieh, C.-T., Wu, F.-L. and Chen, W.-Y. (2009), “Super Water- and Oil-Repellencies from Silica-Based Nanocoatings,” Surf. Coat. Technol. 203, 3377–3384.CrossRefGoogle Scholar
  52. Hutton, S. J., Crowther, J. M. and Badyal, J. P. S. (2000), “Complexation of Fluorosurfactants to Functionalized Solid Surfaces: Smart Behavior,” Chem. Mater. 12, 2282–2286.CrossRefGoogle Scholar
  53. Im, M., Im, H., Lee, J.-H., Yoon, J.-B. and Choi, Y.-K. (2010), “A Robust Superhydrophobic and Superoleophobic Surface with Inverse-Trapezoidal Microstructures on a Large Transparent Flexible Substrate,” Soft Matter 6, 1401–1404.CrossRefGoogle Scholar
  54. Inui, N., Ichihara, T., Minami, T., and Matsui, A. (1998), “Interactions: Timing and Force Control of Finger-tapping Sequences,” Percept. Mot. Skills 86, 1395–1401.CrossRefGoogle Scholar
  55. ITOPF (2015) “Oil Tanker Spill Statistics,” see http://www.itopf.com/knowledge-resources/data-statistics/statistics.
  56. Jalili, M. M. and Moradian, S. (2009), “Deterministic Performance Parameters for an Automotive Polyurethane Clearcoat Loaded With Hydrophilic or Hydrophobic Nano-Silica,” Prog. Org. Coat. 66, 359–366.CrossRefGoogle Scholar
  57. Jin, H., Tian, X., Ikkala, O. and Ras, R. H. A. (2013), “Preservation of Superhydrophobic and Superoleophobic Properties Upon Wear Damage,” ACS Appl. Mater. Interfaces 5, 485–488.CrossRefGoogle Scholar
  58. Jung, Y. C. and Bhushan, B. (2009), “Wetting Behavior of Water and Oil Droplets in Three- Phase Interfaces for Hydrophobicity/philicity and Oleophobicity/philicity,” Langmuir 25, 14165–14173.CrossRefGoogle Scholar
  59. Kim, P., Wong, T.-K., Alvarenga, J., Kreder, M. J., Adorno-Martinez, W. E., and Aizenberg, J. (2012), “Liquid-Infused Nanostructured Surfaces with Extreme Anti-Ice and Anti-Frost Performance,” ACS Nano 6, 6569–6577.CrossRefGoogle Scholar
  60. Kondash, A. and Vengosh, A. (2015) “Water Footprint of Hydraulic Fracturing,” Environ. Sci. Technol. Lett. 2, 276–280.CrossRefGoogle Scholar
  61. Kreder, M. J., Alvarenga, J., Kim, P. and Aizenberg, J. (2016), “Designing of anti-Icing Surfaces: Smooth Textured or Slippery?,” Nature Rev. 1, 1–15.Google Scholar
  62. Lee, K. K. and Ahn, C. H. (2013), “Superhydrophilic Multilayer Silica Nanoparticle Networks on a Polymer Microchannel Using a Spray Layer-by-Layer Nanoassembly Method” ACS Applied Mater. Interfaces 5, 8523–8530.CrossRefGoogle Scholar
  63. Li, L., Wang, Y., Gallaschun, C., Risch, T. and Sun, J. (2012), “Why Can a Nanometer-Thick Polymer Coated Surface be More Wettable to Water than to Oil?” J. Mater. Chem. 22, 16719 − 1672.CrossRefGoogle Scholar
  64. Lovingood, D. D., Salter, W. B., Griffith, K. R., Simpson, K. M., Hearn, J. D., and Owens, J. R. (2013), “Fabrication of Liquid and Vapor Protective Cotton Fabrics,” Langmuir 29, 15043–15050.CrossRefGoogle Scholar
  65. Ma, W., Higaki, Y., Otsuka, H., and Takahara, A. (2013), “Perfluoropolyether-infused nano-texture: a versatile approach to omniphobic coatings with low hysteresis and high transparency,” Chem. Commun. 49, 597–599.CrossRefGoogle Scholar
  66. Ma, W., Samal, S. K., Liu, Z., Xiong, R., De Smedt, S. C., Bhushan, B., Zhang, Q., and Huang, C. (2017), “Dual pH- and Ammonia-vapor-responsive Electrospun Nanofibrous Membranes for Oil-water Separations”, J. Membrane Sci. 537, 128–139.CrossRefGoogle Scholar
  67. Mark, J. E. (1999), Polymer Data Handbook, second ed., Oxford University Press, Oxford, U.K.Google Scholar
  68. Martin, S. and Bhushan, B. (2017), “Transparent, Wear-resistant, Superhydrophobic and Superoleophobic Poly(dimethylsiloxane) (PDMS) Surfaces,” J. Colloid Interface Sci. 488, 118–126.CrossRefGoogle Scholar
  69. Martin, S., Brown, P. S., and Bhushan, B. (2017), “Fabrication Techniques for Bioinspired, Mechanically-durable, Superliquiphobic Surfaces for Water, Oil, and Surfactant Repellency,” Adv. Colloid Interf. Sci. 241, 1–23.CrossRefGoogle Scholar
  70. Mijatovic, D., Eijkel, J. C. T., and van den Berg, A. (2005), “Technologies for Nanofluidic Systems: Top-down vs. Bottom-up—A Review,” Lab Chip 5, 492–500.CrossRefGoogle Scholar
  71. Muthiah, P., Bhushan, B., Yun, K. and Kondo, H. (2013), “Dual-Layered-Coated Mechanically-Durable Superomniphobic Surfaces With Anti-Smudge Properties,” J. Colloid Interface Sci. 409, 227–236.CrossRefGoogle Scholar
  72. Nie, Z. and Kumacheva, E. (2008), “Patterning Surfaces with Functional Polymers,” Nature Mater. 7, 277–290.CrossRefGoogle Scholar
  73. Nishimoto, S. and Bhushan, B. (2013), “Bioinspired Self-cleaning Surfaces with Superhydrophobicity, Superoleophobicity, and Superhydrophilicity,” RSC Advances 3, 671–690.CrossRefGoogle Scholar
  74. Nosonovsky, M. and Bhushan, B. (2008), Multiscale Dissipative Mechanisms and Hierarchical Surfaces: Friction, Superhydrophobicity, and Biomimetics, Springer, Heidelberg, Germany.CrossRefGoogle Scholar
  75. Nwaizuzu, C., Joel, O. F., and Sikoki, F. D. (2015) “Evaluation of Oil Spill Dispersants with a focus on their toxicity and Biodegradability,” Society of Petroleum. Engineers ( https://doi.org/10.2118/178321-ms).
  76. Pan, S., Kota, A.K., Mabry, J.M. and Tuteja, A. (2013), “Superomniphobic Surfaces for Effective Chemical Shielding,” J. Am. Chem. Soc. 135, 578–581.CrossRefGoogle Scholar
  77. Peebles, L. and Norris, B. (2003), “Filling ‘Gaps’ in Strength Data for Design,” Appl. Ergon. 34, 73–88.CrossRefGoogle Scholar
  78. Peng, J., Han, Y., Yang, Y., and Li, B. (2004), “The Influencing Factors on the Macroporous Formation in Polymer Films by Water Droplet Templating,” Polymer 45, 447–452.CrossRefGoogle Scholar
  79. Pham, K. N., Fullston, D., and Sagoe-Crentsil, K. (2007), “Surface Charge Modification of Nano-Sized Silica Colliod,” Aust. J. Chem. 60, 662–666.CrossRefGoogle Scholar
  80. Ramseur, J. L. (2015) “Deepwater Horizon Oil Spill: Recent Activities and Ongoing Developments,” see https://www.fas.org/sgp/crs/misc/R42942.pdf.
  81. Rayleigh, L. (1911), “Breath Figures,” Nature 86, 416–417.CrossRefGoogle Scholar
  82. Saito, T., Tsushima, Y. and Sawada, H. (2015), “Facile Creation of Superoleophobic and Superhydrophilic Surface by Using Fluoroalkyl End-Capped Vinyltrimethoxysilane Oligomer/Calcium Silicide Nanocomposites: Development of these Nanocomposites to Environmental Cyclical Type-Fluorine Recycle through Formation of Calcium Fluoride,” Colloid Polym. Sci. 293, 65–73.CrossRefGoogle Scholar
  83. Sheen, Y., Huang, Y., Liao, C., Chou, H. and Chang, F. (2008), “New Approach to Fabricate an Extremely Super-Amphiphobic Surface Based on Fluorinated Silica Nanoparticles,” J. Polym. Sci. Part B: Polym. Phys. 46, 1984–1990.CrossRefGoogle Scholar
  84. Smith, J. D., Dhiman, R., Paxson, A. T., Love, C. J., Solomon, B. R., and Varanasi, K. K. (2013), “Self-lubricating Surfaces for Food Packaging and Food Processing Equipment,” U.S. Patent no. 8,535,779B1, Sep. 13.Google Scholar
  85. Srinivasarao, M., Collings, D., Philips, A., and Patel, S. (2001), “Three-Dimensionally Ordered Array of Air Bubbles in a Polymer Film,” Science 292, 79–83.CrossRefGoogle Scholar
  86. Steele, A., Bayer, I. and Loth, E. (2009), “Inherently Superoleophobic Nanocomposite Coatings by Spray Atomization,” Nano Lett. 9, 501–505.CrossRefGoogle Scholar
  87. Stenzel, M. H., Barner-Kowollik, C., and Davis, T. P. (2006), “Formation of Honeycomb-structured, Porous Films via Breath Figures with Different Polymer Architectures,” J. Polym. Sci. Part A: Polym. Chem. 44, 2363–2375.CrossRefGoogle Scholar
  88. Stucker, M., Geil, M., Keck, S., Hoffman, K., Rӧchling, A., Memmel, U. and Altmeyer, P. (2001) “Interpapillary Lines-The Variable Part of the Human Fingerprint,” J. Forensic Sci. 46, 857–861.CrossRefGoogle Scholar
  89. Sun, Z., Liao, T., Liu, K., Jiang, L., Kim, J. H., and Dou, S. X. (2014), “Fly-Eye Inspired Superhydrophobic Anti-fogging Inorganic Nanostructures,” Small 10, 3001–3006.CrossRefGoogle Scholar
  90. Tahmasebpoor, M., de Martín, L., Talebi, M., Mostoufi, N., and van Ommen, J. R. (2013), “The Role of the Hydrogen Bond in Dense Nanoparticle-Gas Suspensions,” Phys. Chem. Chem. Phys. 15, 5788–5793.CrossRefGoogle Scholar
  91. Thomsen, S. V., Hulme, R., Landa, L. & Landa, K. (2005), “High Visible Transmission and Infrared/Ultraviolet Radiation Absorption; for Automotive Windows (Windshields, Sidelites, Backlites and Sunroofs) and in Architectural Windows,” US Patent 20050020430 A1, 27 Jan. 2005.Google Scholar
  92. Thünemann, A. F. and Lochhaas, K. H. (1999), “Surface and Solid-State Properties of a Fluorinated Polyelectrolyte − Surfactant Complex,” Langmuir 15, 4867 − 4874.CrossRefGoogle Scholar
  93. Todor, J. I. and Smiley-Oyen, A. L. (1987), “Force Modulation as a Source of Hand Differences in Rapid Finger Tapping,” Acta Psychol65, 65–73.CrossRefGoogle Scholar
  94. Tsujii, K., Yamamoto, T., Onda, T. and Shibuichi, S. (1997), “Super Oil-Repellent Surfaces,” Angew. Chem. Int. Ed. Engl. 36, 1011–1012.CrossRefGoogle Scholar
  95. Tuteja, A., Choi, W., Mabry, J. M., Mckinley, G. H., and Cohen, R. E. (2008), “Robust Omniphobic Surfaces,” Proc. Natl. Acad. Sci. U.S.A. 105, 18200–18205.CrossRefGoogle Scholar
  96. Wang, Y. and Bhushan, B. (2015), “Wear-Resistant and Antismudge Superoleophobic Coating on Polyethylene Terephthalate Substrate Using SiO2 Nanoparticles,” ACS Appl. Mater. Interf. 7, 743–755.CrossRefGoogle Scholar
  97. Wang, X., Hu, H., Ye, Q., Gao, T., Zhou, F. and Xue, Q. (2012), “Superamphiphobic Coatings with Coralline-Like Structure Enabled by One-Step Spray of Polyurethane/Carbon Nanotube Composites,” J. Mater. Chem. 22, 9624–9631.CrossRefGoogle Scholar
  98. Wang, Y., Xue, J., Wang, Q., Chen, Q. and Ding, J. (2013), “Verification of Icephobic/Anti-icing Properties of a Superhydrophobic Surface,” ACS Appl. Mater. Interf. 5, 3370–3381.CrossRefGoogle Scholar
  99. Widawski, G., Rawiso, M., and François, B. (1994), “Self-organized Honeycomb Morphology of Star-polymer Polystyrene Film,” Nature 369, 387–389.CrossRefGoogle Scholar
  100. Wong, T.-S., Kang, S. H., Tang, S. K. Y., Smythe, E. J., Hatton, B. D., Grinthal, A. and Aizenberg, J. (2011), “Bioinspired Self-repairing Slippery Surface with Pressure-stable Omniphobicity,” Nature 477, 443–447.CrossRefGoogle Scholar
  101. Xie, Y., Hill, C. A. S., Xiao, Z., Militz, H. and Mai, C. (2010) “Silane Coupling Agents used for Natural Fiber/Polymer Composites: A Review,” Composites: Part A 41, 806–819.CrossRefGoogle Scholar
  102. Yang, J., Zhang, Z., Men, X., Xu, X. and Zhu, X. (2011), “A Simple Approach to Fabricate Superoleophobic Coatings,” New J. Chem. 35, 576–580.CrossRefGoogle Scholar
  103. Zhang, J. and Seeger, S. (2011), “Superoleophobic Coatings with Ultralow Sliding Angles Based on Silicone Nanofilaments,” Angew. Chem. Int. Ed. 50, 6652–6656.CrossRefGoogle Scholar
  104. Zhao, H., Law, K.-Y. and Sambhy, V. (2011), “Fabrication, Surface Properties, and Origin of Superoleophobicity for a Model Textured Surface,” Langmuir 27, 5927–5935.CrossRefGoogle Scholar
  105. Zhao, N., Weng, L., Zhang, X., Xie, Q., Zhang, X., and Xu, J. (2006), “A Lotus-leaf-like Superhydrophobic Surface Prepared by Solvent-Induced Crystallization,” ChemPhysChem 7, 824–827.CrossRefGoogle Scholar
  106. Zhu, G., Pan, Q., and Liu, F. (2011) “Facile Removal and Collection of Oils from Water Surfaces through Superhydrophobic and Superoleophilic Sponges,” J. Phys. Chem. C 115, 17464–17470.CrossRefGoogle Scholar

Copyright information

© Springer Nature Switzerland AG 2018

Authors and Affiliations

  1. 1.Nanoprobe Laboratory for Bio/Nanotechnology and Biomimetics (NLBB)The Ohio State UniversityColumbusUSA

Personalised recommendations