Skip to main content

Investigation of Long-Term Behaviour of Elastomeric Seals for Transport and Storage Packages

  • Chapter
  • First Online:
The Ageing of Materials and Structures

Abstract

Elastomers are widely used as the main sealing materials in containers for low- and intermediate-level radioactive waste and as an additional component fo metal seals in spent-fuel and high-level waste containers. According to appropriate guidelines and regulations, safe enclosure of the radioactive container contents has to be guaranteed for lengthy storage periods of at least 40 years. Therefore, the understanding of seal ageing behaviour is of high importance and has to be considered with regard to possible dynamic events taking place during transport after storage. An accelerated ageing approach for compressed seals is presented, as well as some first results.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Institutional subscriptions

References

  1. DIN 50035:2012–09, Begriffe auf dem Gebiet der Alterung von Materialien—Polymere Werkstoffe

    Google Scholar 

  2. Ehrenstein GW, Pongratz S (2007) Beständigkeit von Kunststoffen, vol 1. Carl Hanser Verlag, München

    Book  Google Scholar 

  3. ISO 188:2011, Rubber, vulcanized or thermoplastic- Accelerated ageing and heat resistence tests

    Google Scholar 

  4. Celina M, Gillen KT, Assink RA (2005) Accelerated aging and lifetime prediction: review of non-Arrhenius behaviour due to two competing processes. Polym Degrad Stab 90:395–404

    Article  Google Scholar 

  5. Marlier R, Andre R, Malesys P, Issard H (2006) Seal life of EPDM O-rings at high temperature determined by unique method. Packag Trans Storage Secur Radioact Mater 17:57–62

    Article  Google Scholar 

  6. Jaunich M (2012) Tieftemperaturverhalten von Elastomeren im Dichtungseinsatz. Doktorarbeit an der Bundesanstalt für Materialforschung und Prüfung, Berlin

    Google Scholar 

  7. Jaunich M, Stark W, Wolff D (2010) A new method to evaluate the low temperature function of rubber sealing materials. Polym Test 29:815–823

    Article  Google Scholar 

  8. Jaunich M, Stark W, Wolff D (2012) Comparison of low temperature properties of different elastomer materials investigated by a new method for compression set measurement. Polym Test 31:987–992

    Article  Google Scholar 

  9. Jaunich M, Wolff D, Stark W (2013) Low temperature properties of rubber seals—results of component tests. KGK-Kautsch. Gummi Kunstst 66:26–30

    Google Scholar 

  10. Jaunich M, von der Ehe K, Wolff D, Völzke H, Stark W (2011) Understanding low temperature properties of elastomer seals. Packag Trans Storage Secur Radioact Mater (RAMTRANS) 22:83–88 (2011)

    Google Scholar 

  11. Kömmling A, Jaunich M, Wolff D (2016) Effects of heterogeneous aging in compressed HNBR and EPDM O-ring seals. Polym Degrad Stab 126:39–46

    Google Scholar 

  12. Kömmling A, Jaunich M, Wolff D (2016) Ageing of HNBR, EPDM and FKM O-rings, KGK 69(4):36

    Google Scholar 

  13. Wise J, Gillen KT, Clough RL (1997) Quantitative model for the time development of diffusion-limited oxidation profiles. Polymer 38:1929–1944

    Article  Google Scholar 

Download references

Acknowledgements

The authors are grateful for the support by our colleagues M. Goral, S. Schulz and L. Qiao.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to M. Jaunich .

Editor information

Editors and Affiliations

Rights and permissions

Reprints and permissions

Copyright information

© 2018 Springer International Publishing AG

About this chapter

Check for updates. Verify currency and authenticity via CrossMark

Cite this chapter

Kömmling, A., Wolff, D., Jaunich, M. (2018). Investigation of Long-Term Behaviour of Elastomeric Seals for Transport and Storage Packages. In: van Breugel, K., Koleva, D., Beek, T. (eds) The Ageing of Materials and Structures. Springer, Cham. https://doi.org/10.1007/978-3-319-70194-3_2

Download citation

  • DOI: https://doi.org/10.1007/978-3-319-70194-3_2

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-319-70192-9

  • Online ISBN: 978-3-319-70194-3

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics