Abstract
Pneumatic tires on motor vehicles have viscoelastic properties, and its friction on the ground is more complicated than metal to metal contact. Research into the friction coefficient of pneumatic tires and road surfaces remains contradictory and elusive as both road surfaces and vehicle design continue to develop. Vehicle safety, road design and collision investigation rely greatly on accurate determination of tire and road surface friction. This study is designed to determine the effect of vehicle velocity, ambient temperature and rainfall on the friction coefficient of pneumatic tires sliding on bitumen road surfaces. To determine these effects, three series of tests were undertaken. Skid resistance tests were performed in a passenger vehicle on bitumen roads at a range of speeds between 30 and 80 km/h, with and without antilock braking, at a range of temperatures between 3 and 43 °C and pre-, during and post-rainfall. The friction coefficient of the pneumatic tires and road surfaces for each variable was determined using an accelerometer.
Results identified that when a vehicle skids with antilock braking, the friction coefficient of the tires sliding on the road surface will increase as velocity increases. When a vehicle skids without antilock braking, the friction coefficient will decrease with increasing velocity. As temperature increases from 3 to 43 °C, the friction coefficient increases linearly. The friction coefficient of tires sliding on a road surface at 60 km/h will increase in periods of heavy rain and decrease on a wet road after a period of rainfall, in comparison to dry road friction. A solution was developed to facilitate friction coefficient prediction. Where any analysis of the friction coefficient of pneumatic tires sliding on road surfaces is necessary, the developed models can be used to account for any variation due to velocity and temperature. If the friction coefficient of a vehicle sliding on a bitumen road at 3 °C is identified, then it is possible to predict what the friction for the same vehicle sliding on the same road at any other temperature using the prediction models. A similar model was developed to account for changing vehicle velocity. Prediction models were not developed for rainfall. The testing procedure did not facilitate the ability to quantify the effect of rainfall, and therefore, a method of prediction was not possible. A need for innovative ideas would be necessary to quantify the effect of rainfall on friction of pneumatic tires and road surfaces. This research will provide valuable information for road design engineers and collision investigators worldwide regarding the effects of vehicle velocity, ambient temperature and rainfall on the friction coefficient of motor vehicle tires and road surfaces.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Blau, P. (2012). Friction science and technology: From concepts to applications (2nd ed.). Ohio, USA: Taylor and Francis.
Blythe, W. & Seguin, D. (2013). “Friction, tread depth and water; Laboratory investigations of passenger car tire cornering performance under minimally-wet conditions”, SAE Technical Paper 2013-01-0789, https://doi.org/10.4271/2013-01-0789
Bowden, F., & Tabor, D. (1974). Friction: An introduction to tribology. London: Heinemann Educational.
Butt, H., & Kappl, M. (2010). Surface and interfacial forces. Wiley-VCH Verlag GmbH & Co: Weinheim.
Chowdury, M. A., Khalil, M. K., Nuruzzaman, D. M., & Rahaman, M. (2011). The effect of sliding velocity and normal load on friction and wear property of aluminium. International Journal of Mechanical and Mechatronics Engineering, 11(1), 45–49.
Claeys, X., Yi, J., & Alvarez, L., et al. (2001). “A dynamic tire/road friction model for 3D vehicle control and simulation,” Proceedings of IEEE Intelligent Transportation Systems Conference, pp: 483–488.
Dowson, D. (1979). History of Tribology. London: Longman.
Erjavec, J. (2003). TechOne automotive brakes. CengageBrain, Ch. 39, p. 359.
Glaeser, W. (2012). Characterization of tribological materials. New York: Momentum Press.
Gunaratne, M., Bandara, N., Medzorian, J., Chawla, M., & Ulrich, P. (2000). Correlation of tire wear and friction to texture of concrete pavements. Journal of Materials in Civil Engineering, 12, 46–54.
Grosch, K. A. (1963). The relation between the friction and visco-elastic properties of rubber. Proc. R. Soc. Lond. A, 274, 21–39. https://doi.org/10.1098/rspa.1963.0112.
Heinrichs, B. E., Allin, B., Bowler, J., & Siegmund, G. (2003). Vehicle speed affects both pre-skid braking kinematics and average tire/roadway friction. Accident Analysis and Prevention, 36, 829–840.
Heinrichs, B. E., Allin, B. D., Bowler, J. J., & Siegmund, G. P. (2004a). Vehicle velocity affects both pre-skid braking kinematics and average tire/roadway friction. Accident Analysis and Prevention, 36, 829–840.
Heinrichs, B. E., Boyd, D., & Allin, J. J. (2004b). Vehicle speed affects both pre-skid braking kinematics and average tire/roadway friction. Accident Analysis and Prevention, 36, 829–840.
Jazar, R. N. (2011). Advanced dynamics: Rigid body, multibody, and aerospace applications. New York: Wiley.
Jazar, R. N. (2013). Advanced vibrations: A modern approach. New York: Springer.
Jazar, R. N. (2017). Vehicle dynamics: Theory and application (3rd ed.). New York: Springer.
Leu, M. C., & Henry, J. J. (1978). Prediction of skid resistances as a function of velocity from pavement texture measurements. Transportation Research Record, 666, 7–13.
Moore, D. (1967). The friction of pneumatic tires. New York: Elsevier Scientific Pub.
Persson, B. (1998). On the theory of rubber friction. Surface Science, 401(3), 445–454.
Persson, B. (2001). Theory of Rubber Friction and Contact Mechanics. The Journal of Chemical Physics, 115, 3840.
Persson, B., Tartaglino, U., & Albohr, O. (2004). Rubber friction on wet and dry road surfaces: The sealing effect. Physical Review B, 71(3), 03542.
Perrson, B. (2006). Rubber friction: role of flash temperature. J. Phys: Condens. Matter., 18, 7789–7823.
Quinn, T. F. J. (1983). Physical Analysis for Tribology. Cambridge: Cambridge University Press.
Rand, C., & Crosby, A. (2006). Insight into the periodicity of Schallamach waves in soft material friction. Applied Physics Letters, 89, 261907.
Schallamach, A. (1952). The load dependence of rubber friction. Proceedings of the Physical Society, 65(9), 393.
Shah, V. R., & Henry, J. J. (1978). Determination of skid resistance-speed behaviour and side force coefficients of pavements. Transportation Research, 666, 13–18.
Takadoum, J. (2007). Materials and surface engineering in tribology. London: ISTE.
Takadoum, J. (2010). Tribology. In Materials and surface engineering in tribology (pp. 49–108). Wiley-ISTE.
Wada, N., & Uchiyama, Y. (1993). Friction and wear of short fibre reinforced rubber composites under various sliding speeds and loads. Wear, 162–164, 930–938.
Warner, C., Smith, G., James, M., & Germane, G. (1983). Friction Applications in Accident Reconstruction. SAE 830612.
Wrobel, G., & Szymiczek, M. (2008). Influence of temperature on friction coefficient of low density polyethylene. JAMME, 28(1), 31–34.
Wu, F., Li, J., Shu, X., Zha, X., & Xu, B. (2010). Test analysis and theoretical calculation on braking distance of automobile with ABS. IFIP, 347, 521–527.
Dedication
This chapter is dedicated to all who have lost their lives or been seriously injured in motor vehicle collisions and their families and friends who live with the physical and emotional pain of their loss, every day……. Jenelle C. Hartman.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this chapter
Cite this chapter
Hartman, J.C., Marzbani, H., Alam, F., Fard, M., Jazar, R.N. (2018). Friction Coefficient of Pneumatic Tires and Bitumen Roads. In: Dai, L., Jazar, R. (eds) Nonlinear Approaches in Engineering Applications. Springer, Cham. https://doi.org/10.1007/978-3-319-69480-1_8
Download citation
DOI: https://doi.org/10.1007/978-3-319-69480-1_8
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-69479-5
Online ISBN: 978-3-319-69480-1
eBook Packages: EngineeringEngineering (R0)