Abstract
The structural optimization plays a key role in multidisciplinary optimization. The proof of structural integrity is a prerequisite for the performance assessment of a wing design. In addition, the modification of the structural design allows changing the bend-twist coupling properties in a beneficial way for overall cruise performance. Due to the high number of design variables affecting the mass and stiffness of a wing box, a gradient based process is established. It meets the needs of fast convergence and enables the coupling with aerodynamic analyses that provide gradients as well. A well suited parametrization of the design variables is necessary, especially for composite materials. Therefore, lamination parameters are used, which are proven to be suitable for gradient based optimization. In order to consider stiffening structures (i.e. stringer on the wing cover), a smeared stiffener approach is used. With this approach, it is not necessary to model the stringer explicitly in the Finite Element model. The influence of different stringer shapes and their orientation can be evaluated with the method suggested in this paper. In order to reduce calculation time, the numerical model is evaluated using analytic formulations for global and local stability as well as strength. The two approaches, smearing the stiffeners or explicitly modeling stiffeners, are validated by comparison of global deformations. The optimization process is applied to a representative wing box loaded with an eccentric load. The influence of different stringer orientations on the structural deformation is examined in conjunction with the optimization of lamination parameters.
Keywords
- Stringer
- Optimization
- Lamination parameter
This is a preview of subscription content, access via your institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
ANSYS 14.0 Documentation. ANSYS Inc. (2011)
Bloomfield, M., Diaconu, C., Weaver, P.: On feasible regions of lamination parameters for lay-up optimization of laminated composites. Proc. R. Soc. Lond. A Math. Phys. Eng. Sci. 465(2104), 1123–1143 (2009)
Dähne, S., Hühne, C.: Efficient gradient based optimization approach of composite stiffened panels in multidisciplinary environment. In: 5th Aircraft Structure Design Conference (2016)
Diaconu, C.G., Sekine, H.: Layup optimization for buckling of laminated composite shells with restricted layer angles. AIAA J. 42(10), 2153–2163 (2004)
Dillinger, J.K.S., et al.: Stiffness optimization of composite wings with aeroelastic constraints. J. Aircraft 50(4), 1159–1168 (2013)
Grenestedt, J.L., Gudmundson, P.: Layup optimization of composite material structures. In: Optimal Design with Advanced Materials, pp. 311–336 (1993)
Hahn, H., Tsai, S.: Introduction to Composite Materials. Taylor & Francis, Philadelphia (1980)
Herencia, J.E., Weaver, P.M., Friswell, M.I.: Optimization of long anisotropic laminated fiber composite panels with T-shaped stiffeners. AIAA J. 45(10), 2497–2509 (2007)
Ijsselmuiden, S.T., Abdalla, M.M., Gürdal, Z.: Implementation of strength-based failure criteria in the lamination parameter design space. AIAA J. 46, 1826–1834 (2008)
Johnson, S.G.: The NLopt nonlinear-optimization package (2010)
Kennedy, G.J., Martins, J.R.R.A.: A parallel aerostructural optimization framework for aircraft design studies. Struct. Multidiscip. Optim. 50(6), 1079–1101 (2014)
Luftfahrttechnisches Handbuch für Strukturberechnung (HSB), DASA-Airbus, Bremen, Prof. L. Schwarmann, in German and English available at technical information library (TIB) at Hannover. IASB (Industrie Ausschuss Struktur Berechnungsunterlagen) (2009)
Marin, L., et al.: Optimization of composite stiffened panels under mechanical and hygrothermal loads using neural networks and genetic algorithms. Compos. Struct. 94(11), 3321–3326 (2012)
Nemeth, M.P.: A Treatise on Equivalent-Plate Stiffnesses for Stiffened Laminated-Composite Plates and Plate-Like Lattices. National Aeronautics and Space Administration, Langley Research Center (2011)
Setoodeh, S., Abdalla, M.M., Gürdal, Z.: Approximate feasible regions for lamination parameters AIAA-2006-6973. In: Eleventh AIAA/ISSMO Multidisciplinary Analysis and Optimisation Conference, Portsmouth, Virginia, 68 September 2006
Seydel, E.: On the buckling of rectangular isotropic or orthogonal-isotropicplates by tangential stresses. Ing. Arch. (1933)
Svanberg, K.: A class of globally convergent optimization methods based on conservative convex separable approximations. SIAM J. Optim. 12(2), 555–573 (2002)
Tsai, S.W., Pagano, N.J.: Invariant properties of composite materials. Technical report, DTIC Document (1968)
VDI: VDI 2014 Entwicklung von Bauteilen aus Faser-Kunststoff-Verbund Berechnung. Technical report, VDI (2006)
Weaver, P.M., Nemeth, M.P.: Improved design formulas for buckling of orthotropic plates under combined loading. AIAA J. 46(9), 2391–2396 (2008)
Wiedemann, D.J.: Leichtbau Elemente und Konstruktion, zweite edn. Springer, Heidelberg (2007)
Wunderlich, T., Dähne, S.: Aeroelastic tailoring of an NLF forward swept wing. DLR contribution to LuFo IV joint research project AeroStruct (2016)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Dähne, S., Hühne, C. (2018). Gradient Based Structural Optimization of a Stringer Stiffened Composite Wing Box with Variable Stringer Orientation. In: Schumacher, A., Vietor, T., Fiebig, S., Bletzinger, KU., Maute, K. (eds) Advances in Structural and Multidisciplinary Optimization. WCSMO 2017. Springer, Cham. https://doi.org/10.1007/978-3-319-67988-4_62
Download citation
DOI: https://doi.org/10.1007/978-3-319-67988-4_62
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-67987-7
Online ISBN: 978-3-319-67988-4
eBook Packages: EngineeringEngineering (R0)