Advertisement

An Integrated Modelling Concept Based upon Three-Dimensional Models

  • Marcin HojnyEmail author
Chapter
Part of the Advanced Structured Materials book series (STRUCTMAT, volume 47)

Abstract

The chapter presents sample physical and computer simulation results, conducted based on the modelling concept utilising full three-dimensional solutions. In the first part of the chapter, the initial results were presented, verifying the developed three-dimensional solutions spanning high-temperature processes for the macro scale: heating/melting/solidification as well as deformation. In the subsequent part, results of microstructure tests were presented, indicating high variability of the achievable cooling rates in the analysed medium volume. The research is supplemented by the developed concept method of estimation of the microstructure based on special “high-temperature” CCT diagrams. The final part presents results of experimental trials concerning verification of the developed grain growth model for the micro scale. The developed model is a unique one, spanning in a comprehensive manner the growth of grain in an integrated heating-melting-cooling process in the Gleeble 3800 simulator equipment.

References

  1. 1.
    Hojny M (2014) Projektowanie dedykowanych systemów symulacji odkształcania stali w stanie półciekłym. Wzorek, KrakowGoogle Scholar
  2. 2.
    Hojny M, Tarasiuk J, Wronski S (2015) Development of the modeling strategy for the steel deformation in semi-solid state—tomographic studies. Mechanics 112:101–109Google Scholar
  3. 3.
    Glowacki M, Hojny M, Kuziak R (2012) Computer aided investigation of mechanical properties of semi-solid steels. AGH, KrakowGoogle Scholar
  4. 4.
    Hojny M, Glowacki M (2009) The physical and computer modelling of plastic deformation of low carbon steel in semi-solid state. J Eng Mater Technol 131:041003-1–041003-7CrossRefGoogle Scholar
  5. 5.
    Hojny M, Glowacki M (2011) Modeling of strain-stress relationship for carbon steel defor-med at temperature exceeding hot rolling range. J Eng Mater Technol 133:021008–1–021008-7CrossRefGoogle Scholar
  6. 6.
    Mordechai S (ed) (2011) Application of Monte Carlo method in science and engineering. InTech, RijekaGoogle Scholar
  7. 7.
    Chan V (ed) (2013) Theory and application of Monte Carlo simulation. InTech, RijekaGoogle Scholar
  8. 8.
    Mode JC (ed) (2011) Application of Monte Carlo methods in biology, medicine and other field of science. InTech, RijekaGoogle Scholar
  9. 9.
    Carron D et al (2010) Modelling of precipitation during friction stir welding of an Al-Mg-Si alloy. Tech Mech 30:29–44Google Scholar
  10. 10.
    Li MY, Kannatey EA (2002) Monte Carlo simulation of heat-affected zone microstructure in laser-beam-welded nickel sheet. Weld J 81:1–12Google Scholar

Copyright information

© Springer International Publishing AG 2018

Authors and Affiliations

  1. 1.Faculty of Metals Engineering and Industrial Computer Science, Department of Applied Computer Science and ModellingAGH University of Science and TechnologyKrakówPoland

Personalised recommendations