Abstract
Industrial manipulators must be robust with regard to manufacturing tolerances and uncertainties. This paper presents a study of the effects of geometrical uncertainties of a planar parallel manipulator on its kinematic performance and robustness, regarding possible failures. The parallel manipulator under study is a 3RRR, which is composed of a single end-effector connected to the ground by three identical kinematic chains. Each kinematic chain is composed of two passive and one active revolute joints. Among others, parallel manipulators may suffer from two important failures: when the end-effector reaches (i) the workspace’s limitation and (ii) a singular region. Both failures can be assessed by calculating the inverse of the condition number of the Jacobian matrix. In order to evaluate geometrical uncertainties, a Monte Carlo simulation is performed to estimate the probability of both types of failures. Failure Maps are depicted by plotting the probability of failure on the workspace, exhibiting the most affected regions. Based on this information, a robust inverse critical condition number is proposed. This information can be exploited for robustifying the control design and the motion planning of parallel manipulators.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Fontes, J.V., da Silva, M.M.: On the dynamic performance of parallel kinematic manipulators with actuation and kinematic redundancies. Mech. Mach. Theor. 103, 148–166 (2016). http://dx.doi.org/10.1016/j.mechmachtheory.2016.05.004
Xie, F., Liu, X.J., Wang, J.: Performance evaluation of redundant parallel manipulators assimilating motion/force transmissibility. Int. J. Adv. Robot. Syst. 8(5) (2016). http://dx.doi.org/10.5772/50904
Li, Y., Bone, G.M.: Are parallel manipulators more energy efficient? In: Proceedings 2001 IEEE International Symposium on Computational Intelligence in Robotics and Automation (Cat. No.01EX515), pp. 41–46 (2001). http://dx.doi.org/10.1109/CIRA.2001.1013170
Ruiz, A.G., Fontes, J.V.C., da Silva, M.M.: The influence of kinematic redundancies in the energy efficiency of planar parallel manipulators. In: ASME International Mechanical Engineering Congress and Exposition, No. IMECE2015-50278. http://dx.doi.org/10.1115/IMECE2015-50278
Dash, A.K., Chen, I-M., Yeo, S.H., Yang, G.: Singularity-free path planning of parallel manipulators using clustering algorithm and line geometry. In: Proceedings in ICRA 2003 IEEE International Conference on Robotics and Automation, vol. 1, pp. 761–766. http://dx.doi.org/10.1109/ROBOT.2003.1241685
Bohigas, O., Henderson, M.E., Ros, L., Manubens, M., Porta, J.M.: Planning singularity-free paths on closed-chain manipulators. IEEE Trans. Robot. 29(4), 888–898 (2013). http://dx.doi.org/10.1109/10.1109/TRO.2013.2260679
Kotlarski, J., Heimann, B., Ortmaier, T.: Influence of kinematic redundancy on the singularity-free workspace of parallel kinematic machines. Front. Mech. Eng. 7(2), 120–134 (2012). http://dx.doi.org/10.1016/10.1007/s11465-012-0321-8
Santos, J.C., Frederice, D., Fontes, J.V.C., da Silva, M.M.: Numerical analysis and prototyping details of a planar parallel redundant manipulator. In: 12th Latin American Robotics Symposium and 3rd Brazilian Symposium on Robotics (LARS-SBR), pp. 55–60 (2015). http://dx.doi.org/10.1109/LARS-SBR.2015.30
Cha, S.H., Lasky, T.A., Velinsky, S.A.: Determination of the kinematically redundant active prismatic joint variable ranges of a planar parallel mechanism for singularity-free trajectories. Mech. Mach. Theor. 44(5), 1032–1044 (2009). http://dx.doi.org/10.1016/j.mechmachtheory.2008.05.010
Merlet, J.P.: Interval analysis and robotics. In: Robotics Research. Springer Tracts in Advanced Robotics, vol. 66, 147–156
Bastos, R.F., Fontes, J.V.C., da Silva, M.M.: Interval kinematic and dynamic analysis of a planar parallel kinematic manipulator. In: Proceedings of Third International Symposium on Uncertainty Quantification and Stochastic Modeling, UNCERTAINTIES 2016, So Sebastião (2016)
Wu, J., Zhang, B., Wang, L.: A measure for evaluation of maximum acceleration of redundant and nonredundant parallel manipulators. J. Mech. Robot. 8(2), 021001-021001-8 (2015). http://dx.doi.org/10.1115/1.4031500
Gosselin, C., Angeles, J.: Singularity analysis of closed-loop kinematic chains. IEEE Trans. Robot. Autom. 6(3), 281–290 (1990). http://dx.doi.org/10.1109/70.56660
Mohammadi, H.R., Zsombor-murray, P.J.D., Angeles, J.: The isotropic design of two general classes of planar parallel manipulators. J. Robot. Syst. 12(12), 795–805 (1995). http://dx.doi.org/10.1002/rob.4620121204
Alba-Gomez, O., Wenger, P., Pamanes, A.: Consistent kinetostatic indices for planar 3-DOF parallel manipulators, application to the optimal kinematic inversion. In: ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: 29th Mechanisms and Robotics Conference, Parts A and B, vol. 7, pp. 765–774. doi:10.1115/DETC2005-84326
Acknowledgements
This research is supported by FAPESP 2014/01809-0. Moreover, Joao V.C. Fontes and H.L. Vieira are grateful for their CNPq grants.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Vieira, H.L., de Carvalho Fontes, J.V., Beck, A.T., da Silva, M.M. (2018). Robust Critical Inverse Condition Number for a 3RRR Robot Using Failure Maps. In: Carvalho, J., Martins, D., Simoni, R., Simas, H. (eds) Multibody Mechatronic Systems. MuSMe 2017. Mechanisms and Machine Science, vol 54. Springer, Cham. https://doi.org/10.1007/978-3-319-67567-1_27
Download citation
DOI: https://doi.org/10.1007/978-3-319-67567-1_27
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-67566-4
Online ISBN: 978-3-319-67567-1
eBook Packages: EngineeringEngineering (R0)