Abstract
Accurate temperature monitoring is a crucial task that directly affects the safety and effectiveness of thermal ablation procedures.
Compared to MRI, ultrasound-based temperature monitoring systems have many advantages, including higher temporal resolution, low cost, safety, mobility and ease of use. However, conventional ultrasound (US) images have a limited accuracy due to a weak temperature sensitivity. As a result, it is more challenging to fully meet the clinical requirements for assessing the completion of ablation therapy.
A novel imaging method for temperature monitoring is proposed based on the injection of virtual US pattern in the US brightness mode (B-mode) image coupled with biophysical simulation of heat propagation. This proposed imaging method does not require any hardware extensions to the conventional US B-mode system. The main principle is to establish a bi-directional US communication between the US imaging machine and an active element inserted within the tissue. A virtual pattern can then directly be created into the US B-mode display during the ablation by controlling the timing and amplitude of the US field generated by the active element. Changes of the injected pattern are related to the change of the ablated tissue temperature through the additional knowledge of a biophysical model of heat propagation in the tissue. Those changes are monitored during ablation, generating accurate spatial and temporal temperature maps.
We demonstrated in silico the method feasibility and showed experimentally its applicability on a clinical US scanner using ex vivo data. Promising results are achieved: a mean temperature error smaller than 4 \({^\circ }\mathrm{C}\) was achieved in all the simulation experiments. The system performance is tested under different configurations of noise in the data. The effect of error in the localization of the RFA probe is also evaluated.
The original version of this chapter was revised: An acknowledgment has been added. The erratum to this chapter is available at https://doi.org/10.1007/978-3-319-67552-7_20
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
References
Audigier, C., Mansi, T., Delingette, H., Rapaka, S., Mihalef, V., Carnegie, D., Boctor, E., Choti, M., Kamen, A., Ayache, N., Comaniciu, D.: Efficient lattice Boltzmann solver for patient-specific radiofrequency ablation of hepatic tumors. IEEE Trans. Med. Imaging 34(7), 1576–1589 (2015)
de Senneville, B.D., Mougenot, C., Quesson, B., Dragonu, I., Grenier, N., Moonen, C.T.W.: MR thermometry for monitoring tumor ablation. Eur. Radiol. 17(9), 2401–2410 (2007)
Guo, X., Kang, H.-J., Etienne-Cummings, R., Boctor, E.M.: Active ultrasound pattern injection system (AUSPIS) for interventional tool guidance. PLoS ONE 9(10), e104262 (2014)
Kim, Y., Guo, X., Boctor, E.M.: New platform for evaluating ultrasound-guided interventional technologies. In: Proceedings of SPIE, vol. 9790 (2016)
Lewis, M.A., Staruch, R.M., Chopra, R.: Thermometry and ablation monitoring with ultrasound. Int. J. Hyperth. 31(2), 163–181 (2015)
Pennes, H.H.: Analysis of tissue and arterial blood temperatures in the resting human forearm. J. Appl. Physiol. 85(1), 5–34 (1998)
Sun, Z., Ying, H.: A multi-gate time-of-flight technique for estimation of temperature distribution in heated tissue: theory and computer simulation. Ultrasonics 37(2), 107–122 (1999)
Techavipoo, U., Varghese, T., Chen, Q., Stiles, T.A., Zagzebski, J.A., Frank, G.R.: Temperature dependence of ultrasonic propagation speed and attenuation in excised canine liver tissue measured using transmitted and reflected pulses. J. Acoust. Soc. Am. 115(6), 2859–2865 (2004)
Tempany, C.M.C., Stewart, E.A., McDannold, N., Quade, B.J., Jolesz, F.A., Hynynen, K.: MRI-guided focused ultrasound surgery of uterine leiomyomas: a feasibility study 1. Radiology 226(3), 897–905 (2003)
Treeby, B.E., Jaros, J., Rendell, A.P., Cox, B.T.: Modeling nonlinear ultrasound propagation in heterogeneous media with power law absorption using a k-space pseudospectral method. J. Acoust. Soc. Am. 131(6), 4324–4336 (2012)
Acknowledgments
Research reported in this paper was supported by the National Institute of Biomedical Imaging and Bioengineering of the National Institutes of Health under award number R01EB021396.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this paper
Cite this paper
Audigier, C., Kim, Y., Boctor, E. (2017). A Novel Ultrasound Imaging Method for 2D Temperature Monitoring of Thermal Ablation. In: Cardoso, M., et al. Imaging for Patient-Customized Simulations and Systems for Point-of-Care Ultrasound. BIVPCS POCUS 2017 2017. Lecture Notes in Computer Science(), vol 10549. Springer, Cham. https://doi.org/10.1007/978-3-319-67552-7_19
Download citation
DOI: https://doi.org/10.1007/978-3-319-67552-7_19
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-67551-0
Online ISBN: 978-3-319-67552-7
eBook Packages: Computer ScienceComputer Science (R0)