Advertisement

The Rousselier Model

  • Haoyun TuEmail author
Chapter
  • 413 Downloads
Part of the Springer Theses book series (Springer Theses)

Abstract

In the following chapter, the Rousselier model is applied to study numerically the crack propagation in S355 electron beam welded joints. As explained in Chap. 3, crack propagation in C(T)-specimens (C(T)25 with 20% side groove) with different initial crack positions, i.e., the initial crack located in the BM, in the center of the FZ or at the interface between the FZ and the HAZ were tested.

References

  1. J. M. Larsen, T. Nicholas, Load sequence crack growth transient in a superalloy at elevated temperature. Fracture mechanics, fourteenth symposium, vol II, testing and application, STP 791 (1983), pp. 536–552Google Scholar
  2. G. Rousselier, Ductile fracture models and their potential in local approach of fracture. Nucl. Eng. Des. 105, 97–111 (1987)CrossRefGoogle Scholar
  3. G. Rousselier, in Handbook of Materials Behaviour Models The Rousselier model for porous metal plasticity and ductile fracture, (2001), pp. 436–445Google Scholar
  4. S. Schmauder, D. Uhlmann, G. Zies, Experimental and numerical investigations of two material states of the material 15NiCuMoNb5 (WB 36). Comp. Mater. Sci. 25, 174–192 (2002)CrossRefGoogle Scholar
  5. M. Seidenfuss, Untersuchungen zur Beschreibung des Versagensverhaltens mit Hilfe von Schädigungsmodellen am Beispiel des Werkstoffs 20MnMoNi55. Dissertation, Universität Stuttgart, (1992)Google Scholar

Copyright information

© Springer International Publishing AG 2018

Authors and Affiliations

  1. 1.School of Aerospace Engineering and Applied MechanicsTongji UniversityShanghaiChina

Personalised recommendations