Abstract
Cold spray, originally developed as a coating technique, is now applied as an additive manufacturing process to fabricate freestanding components and restore damaged components. Having low working temperature, cold spray additive manufacturing (CSAM) and cold spray restoration (CSR) have the ability to retain the original feedstock properties and prevent adverse influence on the underlying substrate materials. These superior merits are not achievable through conventional high-temperature additive manufacturing processes, thereby CSAM and CSR are attracting great attentions from both scientific and industrial communities. During the past decade, investigations of CSAM and CSR have been widely conducted. Existing works mainly focused on applications, product properties, processing parameters optimization, spray strategy, and robot control. Despite having a large number of reports, a systematic summarization and review on these works has yet to be carried out. Therefore, in this chapter, the existing CSAM and CSR works were summarized and reviewed for the purpose of systematically introducing the progress of CSAM and CSR techniques.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Abolghasemi Fakhri M, Bordatchev EV, Tutunea-Fatan OR (2012) An image-based methodology to establish correlations between porosity and cutting force in micromilling of porous titanium foams. Int J Adv Manuf Technol 60:841–851. https://doi.org/10.1007/s00170-011-3647-1
Abreeza M, Yuji I, Kazuhiro O (2011) Computational simulation for cold sprayed deposition. ELyT Laboratory Workshop, Sendai
Aziz MSA, Ueda T, Furumoto T, Abe S, Hosokawa A, Yassin A (2012) Study on machinability of laser sintered materials fabricated by layered manufacturing system: influence of different hardness of sintered materials. Procedia CIRP 4:79–83. https://doi.org/10.1016/j.procir.2012.10.015
Barnett B, Trexler M, Champagne V (2015) Cold sprayed refractory metals for chrome reduction in gun barrel liners. Int J Refract Met Hard Mater 53:139–143. https://doi.org/10.1016/j.ijrmhm.2015.07.007
Bierk B, Mgr G, Addison G, Elmquist B (2011) Repair Technology Development Projects, In: CSAT Workshop. Worcester, USA
Binder K, Gottschalk J, Kollenda M, Gärtner F, Klassen T (2011) Influence of impact angle and gas temperature on mechanical properties of titanium cold spray deposits. J Therm Spray Technol 20:234–242. https://doi.org/10.1007/s11666-010-9557-1
Birtch W (2010) Practical cold spray. https://www.supersonicspray.com. Accessed 3 June 2014
Blose RE, Walker BH, Walker RM, Froes SH (2006) New opportunities to use cold spray process for applying additive features to titanium alloys. Met Powder Rep 61:30–37. https://doi.org/10.1016/S0026-0657(06)70713-5
Boeing Standards D6-51343 (2006) Thermal spray repair of exterior clad aluminum. USA
Bordin A, Ghiotti A, Bruschi S, Facchini L, Bucciotti F (2014) Machinability characteristics of wrought and EBM CoCrMo alloys. Procedia CIRP 14:89–94. https://doi.org/10.1016/j.procir.2014.03.082
Briefing T (2013) Metal coated particles and defense applications. In: CSAT Workshop. Worcester, USA
Cai Z, Deng S, Liao H, Zeng C, Montavon G (2014) The effect of spray distance and scanning step on the coating thickness uniformity in cold spray process. J Therm Spray Technol 23:354–362. https://doi.org/10.1007/s11666-013-0002-0
Cai Z, Liang H, Quan S, Deng S, Zeng C, Zhang F (2015) Computer-aided robot trajectory auto-generation strategy in thermal spraying. J Therm Spray Technol 24:1235–1245. https://doi.org/10.1007/s11666-015-0282-7
Cai Z, Chen T, Zeng C, Guo X, Lian H, Zheng Y, Wei X (2016) A global approach to the optimal trajectory based on an improved ant Colony algorithm for cold spray. J Therm Spray Technol 25:1631–1637. https://doi.org/10.1007/s11666-016-0468-7
Candel A, Gadow R (2009) Trajectory generation and coupled numerical simulation for thermal spraying applications on complex geometries. J Therm Spray Technol 18:981–987. https://doi.org/10.1007/s11666-009-9338-x
Chad H (2014) CSIRO Titanium Technologies and Additive Manufacturing, Future Manufacturing Flagship. https://www.atse.org.au/Documents/Events/SA%20Manufacturing/chad-henry-titanium-technologies.pdf. Accessed 13 Nov 2016
Champagne V, Helfritch D (2016) The unique abilities of cold spray deposition. Int Mater Rev 6608:1–19. https://doi.org/10.1080/09506608.2016.1194948
Champagne VK, Helfritch D, Leyman PF (2008) Magnesium repair by cold spray. Plat Surf Finish 95:19–28
Champagne VK, Helfritch DJ, Dinavahi SPG, Leyman PF (2011) Theoretical and experimental particle velocity in cold spray. J Therm Spray Technol 20:425–431. https://doi.org/10.1007/s11666-010-9530-z
Chen C, Gojon S, Xie Y, Yin S, Verdy C, Ren Z, Liao H, Deng S (2016a) A novel spiral trajectory for damage component recovery with cold spray. Surf Coat Technol. https://doi.org/10.1016/j.surfcoat.2016.10.096
Chen C, Xie Y, Verdy C, Liao H, Deng S (2016b) Modelling of coating thickness distribution and its application in offline programming software. Surf Coat Technol. https://doi.org/10.1016/j.surfcoat.2016.10.044
Choi HJ, Lee M, Lee JY (2010) Application of a cold spray technique to the fabrication of a copper canister for the geological disposal of CANDU spent fuels. Nucl Eng Des 240:2714–2720. https://doi.org/10.1016/j.nucengdes.2010.06.038
Cormier Y, Dupuis P, Jodoin B, Corbeil A (2013) Net shape fins for compact heat exchanger produced by cold spray. J Therm Spray Technol 22:1210–1221. https://doi.org/10.1007/s11666-013-9968-x
Cormier Y, Dupuis P, Farjam A, Corbeil A, Jodoin B (2014a) Additive manufacturing of pyramidal pin fins: height and fin density effects under forced convection. Int J Heat Mass Transf 75:235–244. https://doi.org/10.1016/j.ijheatmasstransfer.2014.03.053
Cormier Y, Dupuis P, Jodoin B, Corbeil A (2014b) Mechanical properties of cold gas dynamic-sprayed near-net-shaped fin arrays. J Therm Spray Technol 24:476–488. https://doi.org/10.1007/s11666-014-0203-1
Cormier Y, Dupuis P, Jodoin B, Ghaei A (2015) Finite element analysis and failure mode characterization of pyramidal fin arrays produced by masked cold gas dynamic spray. J Therm Spray Technol 24:1549–1565. https://doi.org/10.1007/s11666-015-0317-0
Cormier Y, Dupuis P, Jodoin B, Corbeil A (2016) Pyramidal fin arrays performance using streamwise anisotropic materials by cold spray additive manufacturing. J Therm Spray Technol 25:170–182. https://doi.org/10.1007/s11666-015-0267-6
Czampa M, Markos S, Szalay T (2013) Improvement of drilling possibilities for machining powder metallurgy materials. Procedia CIRP 7:288–293. https://doi.org/10.1016/j.procir.2013.05.049
DeForce B, Eden T, Potter J, Champagne V, Leyman P, Helfritch D (2007) Application of aluminum coatings for the corrosion protection of magnesium by cold spray. In: Tri-Service Corrosion Conference. Denver, USA
Deng S, Chen C (2015) Generation of robot trajectory for thermal spray. In: Adams W (ed) Robot kinematics and motion planning. Nova Science Publishers, New York
Deng S, Cai Z, Fang D, Liao H, Montavon G (2012) Application of robot offline programming in thermal spraying. Surf Coat Technol 206:3875–3882. https://doi.org/10.1016/j.surfcoat.2012.03.038
Deng S, Liang H, Cai Z, Liao H, Montavon G (2014) Kinematic optimization of robot trajectories for thermal spray coating application. J Therm Spray Technol 23:1382–1389. https://doi.org/10.1007/s11666-014-0137-7
Dupuis P, Cormier Y, Fenech M, Corbeil A, Jodoin B (2016a) Flow structure identification and analysis in fin arrays produced by cold spray additive manufacturing. Int J Heat Mass Transf 93:301–313. https://doi.org/10.1016/j.ijheatmasstransfer.2015.10.019
Dupuis P, Cormier Y, Fenech M, Jodoin B (2016b) Heat transfer and flow structure characterization for pin fins produced by cold spray additive manufacturing. Int J Heat Mass Transf 98:650–661. https://doi.org/10.1016/j.ijheatmasstransfer.2016.03.069
Fang D, Deng S, Liao H, Coddet C (2010) The effect of robot kinematics on the coating thickness uniformity. J Therm Spray Technol 19:796–804. https://doi.org/10.1007/s11666-010-9470-7
Farjam A, Cormier Y, Dupuis P, Jodoin B, Corbeil A (2015) Influence of alumina addition to Aluminum fins for compact heat exchangers produced by cold spray additive manufacturing. J Therm Spray Technol 24:1256–1268. https://doi.org/10.1007/s11666-015-0305-4
Gilmore DL, Dykhuizen RC, Neiser RA, Roemer TJ, Smith MF (1999) Particle velocity and deposition efficiency in the cold spray process. J Therm Spray Technol 8:576–582. https://doi.org/10.1361/105996399770350278
Goldbaum D, Manimuda P, Kamath G, Descartes S, Klemberg-Sapieha JE, Chromik RR (2016) Tribological behavior of TiN and Ti (Si,C)N coatings on cold sprayed Ti substrates. Surf Coat Technol 291:264–275. https://doi.org/10.1016/j.surfcoat.2016.02.044
Han T, Zhao Z, Gillispie BA, Smith JR (2005) Effects of spray conditions on coating formation by the kinetic spray process. J Therm Spray Technol 14:373–383. https://doi.org/10.1361/105996305X59369
Howe C (2014) Cold spray repair of the CH-47 accessory cover. In: CSAT Workshop. Worcester, USA
Howe C (2015) Cold spray qualification of T700 engine front frame. In: CSAT Workshop. Worcester, USA
Jakupi P, Keech PG, Barker I, Ramamurthy S, Jacklin RL, Shoesmith DW, Moser DE (2015) Characterization of commercially cold sprayed copper coatings and determination of the effects of impacting copper powder velocities. J Nucl Mater 466:1–11. https://doi.org/10.1016/j.jnucmat.2015.07.001
Jones R, Matthews N, Rodopoulos CA, Cairns K, Pitt S (2011) On the use of supersonic particle deposition to restore the structural integrity of damaged aircraft structures. Int J Fatigue 33:1257–1267. https://doi.org/10.1016/j.ijfatigue.2011.03.013
Jones R, Matthews N, Elston J, Cairns K, Baker J, Wadsley B, Pitt S (2012) SPD repairs to thin aluminium structures. In: 28th International Congress of the Aeronautical Sciences. Brisbane, Australia
Jones R, Molent L, Barter S, Matthews N, Tamboli D (2014) Supersonic particle deposition as a means for enhancing the structural integrity of aircraft structures. Int J Fatigue 68:260–268. https://doi.org/10.1016/j.ijfatigue.2014.03.013
Kashirin A, Klyuev O, Buzdygar T, Shkodkin A (2011) Modern applications of the low pressure cold spray. International Thermal Spray Conference, Hamburg
Kilchenstein G (2014) Cold spray technologies used for repair. In: JTEG Monthly Teleconference. http://jteg.ncms.org/wp-content/gallery/ColdSpray/ColdSpray_SlideDeck.pdf. Accessed 9 Nov 2016
Kotoban D, Grigoriev S, Okunkova A, Sova A (2016) Influence of a shape of single track on deposition efficiency of 316L stainless steel powder in cold spray. Surf Coat Technol. https://doi.org/10.1016/j.surfcoat.2016.10.052
Kumar S, Chavan NM (2011) Cold spray coating technology: activities at ARCI. International Advanced Reserch Centre for Powder Metallurgy and New Materials, Hyderabad
Lee JC, Kang HJ, Chu WS, Ahn SH (2007) Repair of damaged mold surface by cold-spray method. CIRP Ann – Manuf Technol 56:577–580. https://doi.org/10.1016/j.cirp.2007.05.138
Leyman PF, Champagne VK (2009) Cold spray process development for the reclamation of the Apache helicopter mast support. Report No.: ARL-TR-4922. Army Research Laboratory, MD, USA
Li CJ, Li WY, Wang YY, Yang GJ, Fukanuma H (2005) A theoretical model for prediction of deposition efficiency in cold spraying. Thin Solid Films 489:79–85. https://doi.org/10.1016/j.tsf.2005.05.002
Li CJ, Li WY, Liao H (2006) Examination of the critical velocity for deposition of particles in cold spraying. J Therm Spray Technol 15:212–222. https://doi.org/10.1361/105996306X108093
Li WY, Zhang C, Guo XP, Zhang G, Liao HL, Li CJ, Coddet C (2008) Effect of standoff distance on coating deposition characteristics in cold spraying. Materials and DesignMater Des 29:297–304. https://doi.org/10.1016/j.matdes.2007.02.005
Lu G, Lu GQ, Xiao ZM (1999) Mechanical properties of porous materials. J Porous Mater 6:359–368. https://doi.org/10.1023/A:1009669730778
Luo XT, Li YJ, Li CX, Yang GJ, Li CJ (2016) Effect of spray conditions on deposition behavior and microstructure of cold sprayed Ni coatings sprayed with a porous electrolytic Ni powder. Surf Coat Technol 289:85–93. https://doi.org/10.1016/j.surfcoat.2016.01.058
Lyalyakin VP, Kostukov AY, Denisov VA (2016) Special features of reconditioning the housing of a caterpillar diesel oil pump by gas-dynamic spraying. Weld Int 30:68–70. https://doi.org/10.1080/09507116.2015.1030152
MacDonald D, Fernández R, Delloro F, Jodoin B (2016) Cold spraying of Armstrong process titanium powder for additive manufacturing. J Therm Spray Technol. https://doi.org/10.1007/s11666-016-0489-2
Maev RG, Strumban E, Leshchinskiy V, Dzhurinskiy D (2014) Repair applications of the LPCS process. In: CSAT Workshop. Worcester, USA
Matthews N, Jones R, Sih GC (2014) Application of supersonic particle deposition to enhance the structural integrity of aircraft structures. Sci China Phys Mech Astron 57:12–18. https://doi.org/10.1007/s11433-013-5367-z
May C, Marx S, Paul A (2013) Selected R&D results and industrial applications. In: CSAT Workshop, Worcester, USA
Montevecchi F, Grossi N, Takagi H, Scippa A, Sasahara H, Campatelli G (2016) Cutting forces analysis in additive manufactured AISI H13 alloy. Procedia CIRP 46:476–479. https://doi.org/10.1016/j.procir.2016.04.034
Morgan R, Fox P, Pattison J, Sutcliffe C, O’Neill W (2004) Analysis of cold gas dynamically sprayed aluminium deposits. Mater Lett 58:1317–1320. https://doi.org/10.1016/j.matlet.2003.09.048
Moridi A, Hassani Gangaraj SM, Vezzu S, Guagliano M (2014) Number of passes and thickness effect on mechanical characteristics of cold spray coating. Procedia Eng 74:449–459. https://doi.org/10.1016/j.proeng.2014.06.296
Papyrin A (2001) Cold spray technology. Adv Mater Process 159:49–51
Pattison J, Celotto S, Morgan R, Bray M, O’Neill W (2007) Cold gas dynamic manufacturing: a non-thermal approach to freeform fabrication. Int J Mach Tools Manuf 47:627–634. https://doi.org/10.1016/j.ijmachtools.2006.05.001
Pattison J, Celotto S, Khan A, O’Neill W (2008) Standoff distance and bow shock phenomena in the cold spray process. Surf Coat Technol 202:1443–1454. https://doi.org/10.1016/j.surfcoat.2007.06.065
Ramulu M, Rao PN, Kao H (2002) Drilling of (Al2O3)p/6061 metal matrix composites. J Mater Process Technol 124:244–254. https://doi.org/10.1016/S0924-0136(02)00176-0
Rech S, Trentin A, Vezzù S, Vedelago E, Legoux JG, Irissou E (2014) Different cold spray deposition strategies: single- and multi-layers to repair aluminium alloy components. J Therm Spray Technol 6061:1237–1250. https://doi.org/10.1007/s11666-014-0141-y
Richter P (2014) New value chain for advanced coatings by using cold spray. In: Industrial Technologies 2014 – Smart Growth through Research and Innovation. Athens, Greece
Schell J (2016) Cold spray aerospace applications. In: CSAT Workshop, Worcester, USA
Security E, Program TC (2011) Cost and performance report cold spray for repair of magnesium. http://www.dtic.mil/dtic/tr/fulltext/u2/a572962.pdf. Accessed 28 Oct 2016
Sova A, Grigoriev S, Okunkova A, Smurov I (2013) Potential of cold gas dynamic spray as additive manufacturing technology. Int J Adv Manuf Technol 69:2269–2278. https://doi.org/10.1007/s00170-013-5166-8
Stier O (2014) Fundamental cost analysis of cold spray. J Therm Spray Technol 23:131–139. https://doi.org/10.1007/s11666-013-9972-1
Stoltenhoff T, Zimmermann F (2012) LOXPlate® coatings for aluminum aerospace components exposed to high dynamic stresses. Praxair Surface Technologies GmbH, Ratingen
Tabbara H, Gu S, McCartney DG, Price TS, Shipway PH (2011) Study on process optimization of cold gas spraying. J Therm Spray Technol 20:608–620. https://doi.org/10.1007/s11666-010-9564-2
Tutunea-Fatan OR, Fakhri MA, Bordatchev EV (2011) Porosity and cutting forces: from macroscale to microscale machining correlations. Proc Inst Mech Eng Part B J Eng Manuf 225:619–630. https://doi.org/10.1177/2041297510394057
Vilardell AM, Cinca N, Concustell A, Dosta S, Cano IG, Guilemany JM (2015) Cold spray as an emerging technology for biocompatible and antibacterial coatings: state of art. J Mater Sci 4441–4462. doi:https://doi.org/10.1007/s10853-015-9013-1
Villa M, Dosta S, Guilemany JM (2013) Optimization of 316L stainless steel coatings on light alloys using cold gas spray. Surf Coat Technol 235:220–225. https://doi.org/10.1016/j.surfcoat.2013.07.036
Villafuerte J (2015) Using cold spray to add features to components. http://www.coldsprayteam.com/files/Villafuerte%20CSAT%20using%20CS%20to%20add%20features.pdf. Accessed 27 Oct 2016
Widener CA, Carter MJ, Ozdemir OC, Hrabe RH, Hoiland B, Stamey TE, Champagne VK, Eden TJ (2016) Application of high-pressure cold spray for an internal bore repair of a navy valve actuator. J Therm Spray Technol 25:193–201. https://doi.org/10.1007/s11666-015-0366-4
Xiong Y, Zhuang W, Zhang M (2015) Effect of the thickness of cold sprayed aluminium alloy coating on the adhesive bond strength with an aluminium alloy substrate. Surf Coat Technol 270:259–265. https://doi.org/10.1016/j.surfcoat.2015.02.048
Yandouzi M, Gaydos S, Guo D, Ghelichi R, Jodoin B (2014) Aircraft skin restoration and evaluation. J Therm Spray Technol 23:1281–1290. https://doi.org/10.1007/s11666-014-0130-1
Yin S, Wang X, Li W, Liao H, Jie H (2012) Deformation behavior of the oxide film on the surface of cold sprayed powder particle. Appl Surf Sci 259:294–300. https://doi.org/10.1016/j.apsusc.2012.07.036
Yin S, Suo X, Su J, Guo Z, Liao H, Wang X (2013) Effects of substrate hardness and spray angle on the deposition behavior of cold-sprayed Ti particles. J Therm Spray Technol 23:76–83. https://doi.org/10.1007/s11666-013-0039-0
Yin S, Liu Q, Liao H, Wang X (2014) Effect of injection pressure on particle acceleration, dispersion and deposition in cold spray. Comput Mater Sci 90:7–15. https://doi.org/10.1016/j.commatsci.2014.03.055
Yin S, Suo X, Xie Y, Li W, Lupoi R, Liao H (2015) Effect of substrate temperature on interfacial bonding for cold spray of Ni onto cu. J Mater Sci 50:7448–7457. https://doi.org/10.1007/s10853-015-9304-6
Yin S, Xie Y, Cizek J, Ekoi E, Hussain T, Dowling D, Lupoi R (2017) Advanced diamond-reinforced metal matrix composites via cold spray: properties and deposition mechanism. Compos Part B Eng. https://doi.org/10.1016/j.compositesb.2017.01.009
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this chapter
Cite this chapter
Yin, S., Aldwell, B., Lupoi, R. (2018). Cold Spray Additive Manufacture and Component Restoration. In: Cavaliere, P. (eds) Cold-Spray Coatings. Springer, Cham. https://doi.org/10.1007/978-3-319-67183-3_6
Download citation
DOI: https://doi.org/10.1007/978-3-319-67183-3_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-67182-6
Online ISBN: 978-3-319-67183-3
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)