Abstract
This chapter presents the corrosion properties of cold-sprayed coatings. Cold spraying has shown its potential producing corrosion-resistant coatings for several operation conditions due to the fact that dense and protective metallic and composite coatings can be manufactured by using cold spray processes, examples are presented in Fig. 13.1. This enables the use of cold-sprayed coatings as corrosion barrier coatings. In addition to corrosion resistance, other advantages of cold-sprayed coatings are dealing with high strength, electrical conductivity and minimal or compressive residual stresses as well as repairing and additive manufacturing (Papyrin et al., Cold spray technology, 1st edn. Elsevier, printed in the Netherlands, 328 p, 2007; Champagne and Helfritch, Int Mater Rev 61(7):437–455, 2016; Champagne, The cold spray materials deposition process: fundamentals and applications. Woodhead Publishing Ltd., Cambridge, 362 p, 2007; Koivuluoto, Microstructural characteristics and corrosion properties of cold-sprayed coatings, Doctoral Thesis, Tampere University of Technology, Tampereen Yliopistopaino Oy, Tampere, 153, 2010; Villafuerte, Modern cold spray – materials, process, and applications. Springer International Publishing, p 429, 2015). Corrosion properties and behavior of the cold-sprayed coatings are increasingly reported in the literature during last years. Recently, review papers concerning corrosion properties of cold-sprayed coatings have been published by Bala et al. (Surf Eng 30(6):414–421, 2014), Koivuluoto and Vuoristo, (Surf Eng 30:404–414, 2014) and Hassani-Gangaraj et al. (Surf Eng 31(11):803–815, 2015). Furthermore, cold spraying can be used for corrosion protection as well as repairing of corrosion defects (Vardelle et al., J Therm Spray Technol 25(8):1376–1440, 2016).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Allen C, Marrocco T, McNutt P, Koivuluoto H, Latokartano J, Vuoristo P, Olsson R (2015) A novel coaxially laser-assisted (COLA) cold spray system, ITSC2015: International Thermal Spray Conference, 11–14 May 2015, Long Beach, California, USA, pp 210–216
AL-Mangour B, Mongrain R, Irissou E, Yue S (2013) Improving the strength and corrosion resistance of 316L stainless steel for biomedical applications using cold spray. Surf Coat Technol 216:297–307
Baboian R (2003) Galvanic corrosion, corrosion: fundamentals, testing, and protection, ASM handbook, 13A, pp 210–213
Bala N, Singh H, Prakash S (2010a) Accelerated hot corrosion studies of cold spray Ni–50Cr coating on boiler steels. Mater Des 31:244–253
Bala N, Singh H, Prakash S (2010b) High temperature corrosion behavior of cold spray Ni-20Cr coating on boiler steel in molten salt environment at 900 °C. J Therm Spray Technol 19(1–2):110–118
Bala N, Singh H, Prakash S, Karthikeyan J (2012) Investigations on the behavior of HVOF and cold sprayed Ni-20Cr coating on T22 boiler steel in actual boiler environment. J Therm Spray Technol 21(1):144–158
Bala N, Singh H, Karthikeyan J, Prakash S (2014) Cold spray coating process for corrosion protection: a review. Surf Eng 30(6):414–421
Bala N, Singh H, Prakash S (2017) Performance of cold sprayed Ni based coatings in actual boiler environment. Surf Coat Technol 318:50–61
Balani K, Laha T, Agarwal A, Karthikeyan J, Munroe N (2005) Effect of carrier gases on microstructural and electrochemical behavior of cold-sprayed 1100 aluminum coating. Surf Coat Technol 195:272–279
Blose R, Vasquez D, Kratochvil W (2005) Metal passivation to resist corrosion using the cold spray process, thermal spray 2005: explore its surfacing potential!, 2–4 May 2005, Basel, Switzerland, pp 126–134
Bu H, Yandouzi M, Lu C, MacDonald D, Jodoin B (2012) Cold spray blended Al + Mg17Al12 coating for corrosion protection of AZ91D magnesium alloy. Surf Coat Technol 207:155–162
Caron RN, Staley JT (1997) Effects of composition, processing, and structure on properties of nonferrous alloys, materials selection and design, ASM handbook, 20, pp 383–415
Champagne V (ed) (2007) The cold spray materials deposition process: fundamentals and applications. Woodhead Publishing Ltd., Cambridge, 362 p
Champagne V, Helfritch D (2016) The unique abilities of cold spray deposition. Int Mater Rev 61(7):437–455
Chatterjee U, Bose S, Roy S (2001) Environmental degradation of metals. Marcel Dekker Inc, New York
Chavan NM, Kiran B, Jyothirmayi A, Sudharshan Phani P, Sundararajan G (2013) The corrosion behavior of cold sprayed zinc coatings on mild steel substrate. J Therm Spray Technol 22(4):463–470
Cramer SD, Covino Jr BS (eds) (2005) Corrosion of Tantalum and Tantalum alloys, corrosion: materials, ASM handbook, 13B, pp 337–353
DeForce BS, Eden TJ, Potter JK (2011) Cold spray Al-5% Mg coatings for the corrosion protection of magnesium alloys. J Therm Spray Technol 20(6):1352–1358
Diab M, Pang X, Jahed H (2017) The effect of pure aluminum cold spray coating on corrosion and corrosion fatigue of magnesium (3% Al-1% Zn) extrusion. Surf Coat Technol 309:423–435
Dosta S, Couto M, Guilemany JM (2013) Cold spray deposition of a WC-25Co cermet onto Al7075-T6 and carbon steel substrates. Acta Mater 61:643–652
Dzhurinskiy D, Maeva E, Ev L, Maev RG (2012) Corrosion protection of light alloys using low pressure cold spray. J Therm Spray Technol 21(2):304–313
Dzhurinskiy D, Leshchinsky V, Strumban E, Maeva E, Maev RG (2015) Protective coatings for mechanical aluminum–magnesium joints. Surf Eng 31(10):740–746
Frankel G (2003) Pitting corrosion, corrosion: fundamentals, testing, and protection, ASM handbook, 13A, pp 236–241
Hassani-Gangaraj SM, Moridi A, Guagliano M (2015) Critical review of corrosion protection by cold spray coatings. Surf Eng 31(11):803–815
Hussain T, McCartney DG, Shipway PH, Marrocco T (2011) Corrosion behavior of cold sprayed titanium coatings and free standing deposits. J Therm Spray Technol 20:1–2, 260–274 (Hussain et al. 2011)
Jones D (1996) Principles and prevention of corrosion. Prentice-Hall, Upper Saddle River
Jones R, Matthews N, Rodopoulos CA, Cairns K, Pitt S (2011) On the use of supersonic particle deposition to restore the structural integrity of damaged aircraft structures. Int J Fatigue 33(9):1257–1267
Kalsi SS, Sidhu TS, Singh H, Karthikeyan J (2016) Behavior of cold spray coating in real incineration environment. Mater Manuf Process 31(11):1468–1475
Karthikeyan J, Laha T, Balani K, Agarwal A, Munroe N (2004) Microstructural and electrochemical characterization of cold-sprayed 1100 aluminum coating, thermal spray 2004: advances in technology and application, 10–12 May 2004, Osaka, Japan, pp 241–246
Kelly R (2003) Crevice corrosion, corrosion: fundamentals, testing, and protection, ASM handbook, 13A, pp 242–247
Koivuluoto H (2010) Microstructural characteristics and corrosion properties of cold-sprayed coatings. Doctoral thesis, Tampere University of Technology, Tampere, p 153
Koivuluoto H, Vuoristo P (2009) Effect of ceramic particles on properties of cold-sprayed Ni-20Cr+Al2O3 coatings. J Therm Spray Technol 18(4):555–562
Koivuluoto H, Vuoristo P (2010a) Effect of powder type and composition on structure and mechanical properties of Cu+Al2O3 coatings prepared by using low-pressure cold spray process. J Therm Spray Technol 19(5):1081–1092
Koivuluoto H, Vuoristo P (2010b) Structural analysis of cold-sprayed nickel-based metallic and metallic-ceramic coatings. J Therm Spray Technol 19(5):975–989
Koivuluoto H, Vuoristo P (2014) Structure and corrosion properties of cold sprayed coatings: a review. Surf Eng 30:404–414
Koivuluoto H, Lagerbom J, Kylmälahti M, Vuoristo P (2008) Microstructure and mechanical properties of low-pressure cold-sprayed coatings. J Therm Spray Technol 17(5–6):721–727
Koivuluoto H, Näkki J, Vuoristo P (2009a) Corrosion properties of cold-sprayed tantalum coatings. J Therm Spray Technol 18(1):75–82
Koivuluoto H, Näkki J, Vuoristo P (2009b) Structure and corrosion behavior of cold-sprayed tantalum coatings, thermal spray 2009: expanding thermal spray performance to new markets and applications. In: Marple B, Hyland M, Lau YC, Li CJ, Lima R, Montavon G (eds) ASM International, 4–7 May 2009, Las Vegas, Nevada, USA, pp 314–319
Koivuluoto H, Bolelli G, Lusvarghi L, Casadei F, Vuoristo P (2010a) Corrosion resistance of cold-sprayed Ta coatings in very aggressive conditions. Surf Coat Technol 205(4):1103–1107
Koivuluoto H, Honkanen M, Vuoristo P (2010b) Cold-sprayed copper and tantalum coatings – detailed FESEM and TEM analysis. Surf Coat Technol 204(15):2353–2361
Koivuluoto H, Coleman A, Murray K, Kearns M, Vuoristo P (2012) High-pressure cold sprayed (HPCS) and low pressure cold sprayed (LPCS) coatings prepared from OFHC Cu feedstock – overview from powder characteristics to coating properties. J Therm Spray Technol 21(5):1065–1075
Koivuluoto H, Milanti A, Bolelli G, Lusvarghi L, Vuoristo P (2014) High-pressure cold-sprayed Ni and Ni-Cu coatings: improved structures and corrosion properties. J Therm Spray Technol 23(1):98–103
Koivuluoto H, Bolelli G, Milanti A, Lusvarghi L, Vuoristo P (2015) Microstructural analysis of high-pressure cold-sprayed Ni, NiCu and NiCu+Al2O3 coatings. Surf Coat Technol 268:224–229
Kroemmer W, Heinrich P (2006) Cold spraying – potential and new application ideas, thermal spray 2006: pushing the envelope of materials performance. ASM International, 15–18 May 2006, Seattle, USA
Kruger J (2003) Passivity, corrosion: fundamentals, testing, and protection. ASM Handbook, vol 13A. ASM International, Materials Park, pp 61–67
Kulmala M, Vuoristo P (2008) Influence of process conditions in laser-assisted low-pressure cold spraying. Surf Coat Technol 202(18):4503–4508
Ma C, Liu X, Zhou C (2014) Cold-sprayed Al coating for corrosion protection of Sintered NdFeB. J Therm Spray Technol 23(3):456–462
Maev R, Leshchynsky V (2006) Air gas dynamic spraying of powder mixtures: theory and application. J Therm Spray Technol 15(2):198–205
Marrocco T, Hussain T, McCartney DG, Shipway PH (2011) Corrosion performance of laser posttreated cold sprayed titanium coatings. J Therm Spray Technol 20(4):909–917
Nooririnah O, Rohana A, Nazrul HN, Suhana M (2012) Supersonic particle deposition as potential corrosion treatment method for helicopter part in Malaysia. Int J Adv Res Eng Technol 3(2):275–279
Olakanmi EO, Doyoyo M (2014) Laser-assisted cold-sprayed corrosion- and wear-resistant coatings: a review. J Therm Spray Technol 23(5):765–785
Papyrin A, Kosarev V, Klinkov S, Alkimov A, Fomin V (eds) (2007) Cold spray technology, 1st edn. Elsevier, Amsterdam, 328 p
Partovi-Nia R, Ramamurthy S, Zagidulin D, Chen J, Jacklin R, Keech P, Shoesmith DW (2015) Corrosion of cold spray deposited copper coating on steel substrates. Corrosion 71(10):1237–1247
Schweitzer PA (ed) (1996) Corrosion engineering handbook. Marcel Dekker, Inc., NY, USA
Song GL, Atrens A, Dargusch M (1999) Influence of microstructure on the corrosion of diecast AZ91D. Corros Sci 41:249–273
Spencer K, Zhang M-X (2011) Optimisation of stainless steel cold spray coatings using mixed particle size distributions. Surf Coat Technol 205:5153–5140
Spencer K, Fabijanic DM, Zhang M-X (2009) The use of Al–Al2O3 cold spray coatings to improve the surface properties of magnesium alloys. Surf Coat Technol 204:336–344
Talbot D, Talbot J (1998) Corrosion science and technology. CRC Press LLC, Boca Raton
Tao YS, Xiong TY, Sun C, Jin HZ, Du H, Li TF (2009) Effect of alpha-Al2O3 on the properties of cold sprayed Al/alpha-Al2O3 composite coatings on AZ91D magnesium alloy. Appl Surf Sci 256:261–266
Tao Y, Xiong T, Sun C, Kong L, Cui X, Li T, Song G-L (2010) Microstructure and corrosion performance of a cold sprayed aluminium coating on AZ91D magnesium alloy. Corros Sci 52:3191–3197
Vardelle A, Moreau C, Akedo J, Ashrafizadeh H, Berndt CC, Oberste Berghaus J, Boulos M, Brogan J, Bourtsalas AC, Dolatabadi A, Dorfman M, Eden TJ, Fauchais P, Fisher G, Gaertner F, Gindrat M, Henne R, Hyland M, Irissou E, Jordan EH, Aik Khor K, Killinger A, Lau YC, Li CJ, Li L, Longtin J, Markocsan N, Masset PJ, Matejicek J, Mauer G, McDonald A, Mostaghimi J, Sampath S, Schiller G, Shinoda K, Smith MF, Ansar Syed A, Themelis NJ, Toma FL, Trelles JP, Vassen R, Vuoristo P (2016) The 2016 thermal spray roadmap. J Therm Spray Technol 25(8):1376–1440
Villafuerte J (ed) (2015) Modern cold spray – materials, process, and applications. Springer International Publishing, Cham, p 429
Villafuerte J, Dzhurinskiy D, Ramirez R, Maeva E, Leshchynsky V, Maev R (2009) Corrosion behavior and microstructure of the Al-Al2O3 coatings produced by low pressure cold spraying, thermal spray 2009: expanding thermal spray performance to new markets and applications. In: Marple B, Hyland M, Lau YC, Li CJ, Lima R, Montavon E (eds) May 4–7. ASM International, Las Vegas, Nevada, USA, pp 908–913
Vreijling M (1998) Electrochemical characterization of metallic thermally sprayed coatings, printed in the Netherlands, p 143
Wang AP, Zhang T, Wang JQ (2006) Ni-based fully amorphous metallic coating with high corrosion resistance. Philos Mag Lett 86(1):5–11
Wang H-R, Li W-Y, Ma L, Wang J, Wang Q (2007) Corrosion behavior of cold sprayed titanium protective coating on 1Cr13 substrate in seawater. Surf Coat Technol 201:5203–5206
Wang H-R, Hou B-R, Wang J, Li W-Y (2008) Effect of process conditions on microstructure and corrosion resistance of cold-sprayed Ti coatings. J Therm Spray Technol 17(5–6):736–741
Wei Y-K, Luo X-T, Li C-X, Li C-J (2017) Optimization of in-situ shot-peening-assisted cold spraying parameters for full corrosion protection of Mg alloy by fully dense Al-based alloy coating. J Therm Spray Technol 26:173–183
Xiong T, Tao Y, Sun C, Jin H, Du H, Li T (2009) Study on corrosion behavior of cold sprayed Al/α-Al2O3 deposit on AZ91D alloy, thermal spray 2009: expanding thermal spray performance to new markets and applications. In: Marple B, Hyland M, Lau YC, Li CJ, Lima R, Montavon G (eds) May 4–7. ASM International, Las Vegas, Nevada, USA, pp 669–672
Zhou X, Mohanty P (2012) Electrochemical behavior of cold sprayed hydroxyapatite/titanium composite in Hanks´ solution. Electrochim Acta 65:134–140
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this chapter
Cite this chapter
Koivuluoto, H. (2018). Corrosion Resistance of Cold-Sprayed Coatings. In: Cavaliere, P. (eds) Cold-Spray Coatings. Springer, Cham. https://doi.org/10.1007/978-3-319-67183-3_13
Download citation
DOI: https://doi.org/10.1007/978-3-319-67183-3_13
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-67182-6
Online ISBN: 978-3-319-67183-3
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)