Abstract
The quality of a mesh is crucially important if fem solutions are to be deemed acceptable. Too coarse a mesh will lead to inaccurate FEM solutions. The finer the mesh, the better the convergence of the numerical solution. However, finer meshes tend to be expensive in terms of computing resources. The experienced user of FEM would have, over time, developed the skills required for creating just the right mesh for a given problem. Becoming proficient users of fea, with the ability to create representative meshes of the idealized physical problem will serve as a motivation for this chapter. This chapter presents fundamentals of finite element meshes by defining nodes and elements, and the different types of elements. The chapter also describes the principle behind meshing algorithms in commercial FEM solvers. This chapter concludes by presenting reflections on quality of meshes and the type of meshes needed for different type of practical problems. It is expected that at the end of this chapter, readers should have developed a holistic understanding of the effects of meshes to the FEM process.
This is a preview of subscription content, log in via an institution.
Notes
- 1.
Further details can be obtained from the ABAQUS documentation on elements i.e. Part VI: Elements of ABAQUS Analysis User’s Guide.
- 2.
MESH2D is MATLAB-based source code, freely available and distributed at: http://www.mathworks.co.uk/matlabcentral/fileexchange/25555-mesh2d-automatic-mesh-generation
References
Akin, J.: Finite Element Analysis with Error Estimators: an Introduction to the FEM and Adaptive Error Analysis for Engineering Students. Elsevier Science, Amsterdam/Boston (2005). https://books.google.co.uk/books?id=uUsm99d8WBAC
Barth, T., Deconinck, H.: Error Estimation and Adaptive Discretization Methods in Computational Fluid Dynamics. Lecture Notes in Computational Science and Engineering. Springer, Berlin/Heidelberg (2013). https://books.google.co.uk/books?id=hGTsCAAAQBAJ
Cheng, S., Dey, T., Shewchuk, J.: Delaunay Mesh Generation. Chapman & Hall/CRC Computer and Information Science Series. CRC Press (2016). https://books.google.co.uk/books?id=oJ3SBQAAQBAJ
de Berg, M.: Computational Geometry: Algorithms and Applications. Springer, Berlin/Heidelberg (2008). https://books.google.co.uk/books?id=tkyG8W2163YC
Fortunato, M., Persson, P.O.: High-order unstructured curved mesh generation using the winslow equations. J. Comput. Phys. 307, 1–14 (2016)
Gargallo-Peiró, A., Roca, X., Peraire, J., Sarrate, J.: Optimization of a regularized distortion measure to generate curved high-order unstructured tetrahedral meshes. Int. J. Numer. Methods Eng. 103(5), 342–363 (2015). http://dx.doi.org/10.1002/nme.4888
Gil, A.J., Bonet, J.: Finite element analysis of prestressed structural membranes. Finite Elem. Anal. Des. 42(8), 683–697 (2006)
Hjelle, Ø., Dæhlen, M.: Delaunay refinement mesh generation. In: Hjelle, Ø., Dæhlen, M. (eds.) Triangulations and Applications, pp. 131–155. Springer, Berlin (2006)
Irons, B., Loikkanen, M.: An engineers’ defence of the patch test. Int. J. Numer. Methods Eng. 19(9), 1391–1401 (1983)
Ngo, L.C., Choi, H.G.: A multi-level adaptive mesh refinement method for level set simulations of multiphase flow on unstructured meshes. Int. J. Numer. Methods Eng. pp. n/a–n/a (2016). http://dx.doi.org/10.1002/nme.5442. NME-Jul-16-0477.R2
Okereke, M., Akpoyomare, A.: A virtual framework for prediction of full-field elastic response of unidirectional composites. Comput. Mater. Sci. 70, 82–99 (2013). http://dx.doi.org/10.1016/j.commatsci.2012.12.036. http://www.sciencedirect.com/science/article/pii/S0927025612007744
Robinson, J.: A single element test. Comput. Methods Appl. Mech. Eng. 7(2), 191–200 (1976)
Ruppert, J.: A delaunay refinement algorithm for quality 2-dimensional mesh generation. J. Algorithms 18(3), 548–585 (1995)
Sacco, R., Gatti, E., Gotusso, L.: The patch test as a validation of a new finite element for the solution of convection-diffusion equations. Comput. Methods Appl. Mech. Eng. 124(1), 113–124 (1995). http://dx.doi.org/10.1016/0045-7825(95)00784-X. http://www.sciencedirect.com/science/article/pii/004578259500784X
Si, H.: Adaptive tetrahedral mesh generation by constrained delaunay refinement. Int. J. Numer. Methods Eng. 75(7), 856–880 (2008)
Taylor, R., Simo, J., Zienkiewicz, O., Chan, A.: The patch test – a condition for assessing fem convergence. Int. J. Numer. Methods Eng. 22(1), 39–62 (1986)
Zienkiewicz, O., Taylor, R.: The finite element patch test revisited a computer test for convergence, validation and error estimates. Comput. Methods Appl. Mech. Eng. 149(1), 223–254 (1997). http://dx.doi.org/10.1016/S0045-7825(97)00085-6. http://www.sciencedirect.com/science/article/pii/S0045782597000856
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this chapter
Cite this chapter
Okereke, M., Keates, S. (2018). Finite Element Mesh Generation. In: Finite Element Applications. Springer Tracts in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-67125-3_6
Download citation
DOI: https://doi.org/10.1007/978-3-319-67125-3_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-67124-6
Online ISBN: 978-3-319-67125-3
eBook Packages: EngineeringEngineering (R0)