Advertisement

HiFi Visual Target—Methods for Measuring Optical and Geometrical Characteristics of Soft Car Targets for ADAS and AD

  • Stefan NordEmail author
  • Mikael Lindgren
  • Jörgen Spetz
Conference paper
Part of the Lecture Notes in Mobility book series (LNMOB)

Abstract

Advanced Driver-Assistance Systems (ADAS) and Automated Driving (AD) vehicles rely on a variety of sensors and among them optical sensors. Extensive testing of functions using optical sensors is required and typically performed at proving grounds like AstaZero. Soft surrogate targets are used for safety reasons but the optical and geometrical characteristics of soft car targets may differ considerably from that of real vehicles. During tests the quality of the soft car targets deteriorates due to repeated impacts and reassembly of the targets, and there is a need of methods for securing the quality of the soft car targets over time. One of the main goals of the HiFi Visual Target project is to develop and validate accurate and repeatable measurement methods of the optical and geometric characteristics of soft car targets.

Keywords

Advanced driver-assistance systems Automated driving Active safety EuroNCAP Vision zero Soft car target Optical sensors Measurement technology Spectroradiometer Spectral reflectance Geometrical scan 

Notes

Acknowledgments

The Authors would like to acknowledge Vinnova, the Swedish government innovation agency, for supporting these activities within the HiFi Visual Target project under grant agreement number 2016-02496.

References

  1. City safety by Volvo Cars—outstanding crash prevention that is standard in the all-new XC90, press release from 2014, December 5. https://www.media.volvocars.com/global/en-gb/media/pressreleases/154717/city-safety-by-volvo-cars-outstanding-crash-prevention-that-is-standard-in-the-all-new-xc90. Accessed 18 May 2017
  2. Isaksson-Hellman I, Lindman M (2015) Real-World performance of city safety based on swedish insurance data. In: 24th international technical conference on the enhanced safety of vehicles (ESV), no. 15-0121, Gothenburg, Sweden, 8–11 June 2015Google Scholar
  3. Lemment P et al (2013) Evaluation of pedestrian targets used in AEB testing: a report from harmonisation platform 2 dealing with test equipment. In: 23rd international technical conference on the enhanced safety of vehicles (ESV), no. 13-0124, Seoul, Korea, South, 27–30 May 2013Google Scholar
  4. Rabben M, Henze R, Küçükay F (2015) Dynamic crash target for the assessment, evaluation and validation of ADAS and safety functions. In: Proceedings of the 3rd international symposium on future active safety technology towards zero traffic accidents. (and references therein)Google Scholar
  5. Sandner V (2013) Development of a test target for AEB systems. In: 23rd international technical conference on the enhanced safety of vehicles (ESV), no. 13-0406, Seoul, Korea, South, 27–30 May 2013Google Scholar
  6. Suzuki H (2000) Radar cross section of automobiles for millimeter wave band. JARI Res J 22(10):475–478Google Scholar
  7. Volvo car corporation leads the way in car safety: risk of being injured in a Volvo reduced by 50 percent since year 2000. Press release. https://www.media.volvocars.com/global/en-gb/media/pressreleases/45468. Accessed 18 May 2017
  8. Yamada N (2001) Three-dimensional high resolution measurement of radar cross-section for car in 76 GHz band. R&D Rev Toyota CRDL 36(2). (Toyota Central R&D Labs, Inc)Google Scholar
  9. Yamada N (2004) Radar cross section for pedestrian in 76 GHz. In: Proceedings of 2005 European microwave conference, vol 2, pp 46–51, 4–6 Oct 2004Google Scholar

Copyright information

© Springer International Publishing AG 2018

Authors and Affiliations

  1. 1.Safety and Transport, Measurement Science and TechnologyRISE Research Institutes of SwedenBoråsSweden

Personalised recommendations