Abstract
Greg Berry in the Energy and Environmental Systems (EES) Division (later Energy Systems Division) met with me and described a project he was trying to initiate with Morgantown Energy Technology Center (METC).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
I. Finnie, The Mechanism of Erosion of Ductile Metals, Proceedings Third National Congress on Applied Mechanics (American Society of Mechanical Engineers, 1958), pp. 527–532
I. Finnie, Erosion of surfaces by solid particles. Wear 3, 87–103 (1960)
K. Ushimaru, C.T. Crowe, S. Bernstein, Design and Applications of the Novel Slurry Jet Pump, Energy International, Inc., Report EI84-108 (October 1984)
M.J. Parkinson, J.F.G. Grainger, A.W. Jury, T.J. Kempton, Tube erosion at IEA Grimethorpe: cold model studies at CRE, in Reports Commissioned by the Project from Outside Consultants and Others, vol 2, NCB (IEA Grimethorpe) Ltd., Barnsley, S. Yorkshire, U.K. (September 1984)
Computer Modeling of Coal Gasification Reactors, Final Report for June 1975–November 1980: Volume 1 Executive Summary; Volume 2 Technical Report; Volume 3 Users’ Manual for CHEMFLUB A Numerical Model for Fluidized Bed Gasifiers (Planar and Axisymmetric Versions); Volume 4 Operating Manual for EF (Entrained Flow Coal Gasifier) Computer Model, US Department of Energy Report DOE/ET/10242-T1, vols 1–4 (April 1981)
D. Mitchell, CHEMFLUB A Computer Code Model for Fluidized Bed Coal Gasification Reactors, Volume 1 Technical Document, Volume 2 User’s Manual, US Department of Energy Reports DOE/MC/19265-1677 and DOE/MC/19265-1678 (May and June 1984)
P.A. Nicoletti, A.R. Padhye, Comparison of K-FIX and FLUFIX Computer Codes Line-by Line Listing, EG&G Washington Analytical Services Center, Inc., Report, prepared under Contract DE-AC21-8SMC21353 for Morgantown Energy Technology Center, Morgantown, WV (June 1986)
R.W. Lyczkowski, J.X. Bouillard, S.L. Chang, S.M. Folga, User’s Manual for EROSION/MOD1: A Computer Program for Fluid Solids Erosion. Argonne National Laboratory Sponsor Report, Argonne, IL (April 1992). Reprinted by DOE METC as DOE/MC/24193-3500/NTIS No. DE94000032, available from NTIS, Springfield, VA (1994)
R.W. Lyczkowski, J.X. Bouillard, S.M. Folga, User’s Manual for FLUFIX/MOD2: A Computer Program for Fluid-Solids Hydrodynamics. Argonne National Laboratory Sponsor Report, Argonne, IL (April 1992). Reprinted by DOE METC as DOE/MC/24193-3491/NTIS No. DE94000033, available from NTIS, Springfield, VA (1994)
S.W. Burge, FORCE2—A Multidimensional Flow Program for Gas Solids Flow Theory Guide, Report No. DOE/METC/24193-3504/NTIS No. DE94000036, available from NTIS, Springfield, VA (1994)
R.W. Lyczkowski, W.F. Podolski, J.X. Bouillard, S.M. Folga, Metal Wastage Design Guidelines for Bubbling Fluidized Bed Combustors. Argonne National Laboratory Sponsor Report, Argonne, IL (November 1992). Reprinted by DOE METC as DOE/MC/24193-3491/NTIS No. DE94000024, available from NTIS, Springfield, VA (1994). Available from DOE Office of Scientific Information web site http://www.osti.gov/bridge by searching for “Metal Wastage Design Guidelines”
R.W. Lyczkowski, W.F. Podolski, J.X. Bouillard, S.M. Folga, Thermo-Hydrodynamic Design of Fluidized Bed Combustors Estimating Metal Wastage (Springer, New York, 2012)
C.S. Wang, R.W. Lyczkowski, G.F. Berry, Multiphase Hydrodynamic Modeling and Analysis of Non-Newtonian Coal/Water Slurry Rheology, presented at the ASME Winter Annual Meeting, Chicago, pp. 29–35, FED-vol 75 (November 28–December 2, 1988)
R.W. Lyczkowski, C.S. Wang, Hydrodynamic modeling and analysis of two-phase non-Newtonian coal/water slurries. Powder Technol. 69, 285–294 (1992)
J. Ding, R.W. Lyczkowski, W.T. Sha, S.A. Altobelli, E. Fukushima, Numerical analysis of liquid-solid suspension velocities and concentrations obtained by NMR imaging. Powder Technol. 77, 301–312 (1993)
M. Syamlal, Multiphase Hydrodynamics of Gas-Solid Flows, Ph.D. dissertation (Illinois Institute of Technology, Chicago, 1985)
T.J. O’Brien, M. Syamlal, NIMPF: A Non-isothermal Multiparticle Fluidized-Bed Model, Numerical Methods for Multiphase Flows, vol 91 (ASME Fluids Engineering Division, New York, 1990), pp. 65–72
D. Gidaspow, B. Ettehadieh, Fluidization in two-dimensional beds with a jet; 2. hydrodynamic modeling. I&EC Fundam. 22, 193–201 (1983)
M. Syamlal, D. Gidaspow, Hydrodynamics of fluidization: prediction of wall to bed heat transfer coefficients. AIChE J. 31, 127–135 (1985)
M. Syamlal, J. Musser, J.-F. Dietiker, Two-Fluid Models in MFIX, Chapter 2.7 in Multiphase Flow Handbook, Second Edition, ed. by E.E. Michaelides, C.T. Crowe, J.D. Schwarzkopf (CRC Press Taylor & Francis Group, Boca Raton, 2017)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this chapter
Cite this chapter
Lyczkowski, R.W. (2018). METC Starts Erosion R&D Cooperative Venture and MFIX Code Development Using FLUFIX Code. In: The History of Multiphase Science and Computational Fluid Dynamics. Mechanical Engineering Series. Springer, Cham. https://doi.org/10.1007/978-3-319-66502-3_13
Download citation
DOI: https://doi.org/10.1007/978-3-319-66502-3_13
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-66501-6
Online ISBN: 978-3-319-66502-3
eBook Packages: EngineeringEngineering (R0)