Abstract
The paper discusses the issues connected with noninvasive thermal methods for the research and diagnosis of electromechanical objects. It covers the issues of thermovision and its application, as well as the most important techniques of thermovision measurements. Moreover, the paper presents the results of comparative analysis for several examined objects, i.e. commutator motor with heating spiral, alternating current commutator motor and asynchronous three-phase motor.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Rudowski, G.: Termowizja i jej zastosowanie. Wydawnictwo WNT, Warszawa (2004)
FLUKE: Wprowadzenie do termografii. American Technical Publishers, Orland Parkway (2009)
Fokaides, P., Kalogirou, S.: Application of infrared thermography for the determination of the overall heat transfer coefficient (U-Value) in building envelopes. Appl. Energy 88(12), 4358–4365 (2011)
Gomółka, Z., Żesławska, E., Twaróg, B., Bolanowski, M.: Restitution of 3D scenery with coherent and structured light scanner technologies. MAM 09, 430–433 (2015)
Herve, P., Cedelle, J., Negreanu, I.: Infrared technique for simultaneous determination of temperature and emissivity. Infrared Phys. Technol. 55(1), 1–10 (2012)
Jura, J., Adamus, J.: Politechnika Częstochowska. Zastosowanie termografii do oceny izolacyjności cieplnej budynku. Budownictwo o zoptymalizowanym potencjale energetycznym 2(12), 31–39 (2013)
Molin, A., Rohdin, P., Moshfegh, B.: Investigation of energy performance of newly built lowenergy buildings in Sweden. Energy Build 43(10), 2822–2831 (2011)
Mukosiej, J.: Problem dokładności badań cieplnych maszyn elektrycznych. Zeszyty problemowe – Maszyny Elektryczne 100(1), 67 (2013)
Kaczmarek, J.: Using a thermovision method for measuring temperatures of a workpiece during abrasive cut-off operation. Adv. Manuf. Sci. Technol. 35(4), 85 (2011)
Ronkowski, M.: (red.), Maszyny elektryczne wokół nas, Wyd. Politechniki Gdańska Gdańsk, p. 220 (2011)
Michalski, L., Kuźmiński, K., Sadowski, J.: Regulacja temperatury Urządzenia elektrotermicznych. WNT, Warszawa (1991)
Teodorescu, R., Liserre, M., Rodriguez, P.: Grid Converters for Photovoltaic and Wind Power Systems. Wiley, London (2011)
Wittchen, W., Niesler, M., Borecki, M., Zdonek, B.: Application of thermovision method in analysing metallurgical processes. In: 9th International Conference on Quantitative InfraRed Thermography, Krakow (2008)
Bareła, J., Firmanty, K., Kastek, M., Polakowski, H.: Wzorce promieniowania podczerwonego używane do kalibracji urządzeń termowizyjnych. Biuletyn, WAT LX I(2), 81–91 (2012)
Minkina, W.: Pomiary termowizyjne - przyrządy i metody, p. 243. Wydawnictwo Politechniki Częstochowskiej, Częstochowskiej (2004)
Mynarek, P.: Analiza systemów cieplnych w silnikach małej mocy, Politechnika Opolska, Wydział Elektrotechniki. Automatyki i Informatyki, Opole (2014)
Nowak, H.: Zastosowanie badań termowizyjnych w budownictwie. Oficyna Wydawnictwo Politechniki Wrocławskiej, Wrocław (2012)
Więcek, B., De Mey, G.: Termowizja w podczerwieni. Podstawy i zastosowania. Wydawnictwo PAK, Warszawa (2011)
Pękala, Robert, Kwater, Tadeusz, Kwiatkowski, Bogdan: Calculations of conjugated fields in the ferromagnetic medium. Anal. Simul. Electr. Comput. Syst. 324, 1100–1876 (2015)
Acknowledgements
This work has been supported by the National Science Centre, Poland, based on decision DEC-2012/05/B/ST7/01183.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this chapter
Cite this chapter
Twaróg, B., Gomółka, Z., Żesławska, E., Lewicki, A. (2018). Non-Invasive Thermal Methods for the Research and Diagnosis of Electromechanical Objects. In: Mazur, D., Gołębiowski, M., Korkosz, M. (eds) Analysis and Simulation of Electrical and Computer Systems. Lecture Notes in Electrical Engineering, vol 452. Springer, Cham. https://doi.org/10.1007/978-3-319-63949-9_22
Download citation
DOI: https://doi.org/10.1007/978-3-319-63949-9_22
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-63948-2
Online ISBN: 978-3-319-63949-9
eBook Packages: EngineeringEngineering (R0)