Abstract
The mechanical response of plastic-bonded explosives (PBXs) is highly complex and depends on a number of factors including, but not limited to temperature, strain rate and binders. In this work, we have measured and analyzed the mechanical properties of LX-14, which contains 95.5 wt% HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine) and 4.5 wt% Estane 5702, with no additional plasticizer. We are interested to compare LX-14 with PBX 9501 (95 wt% HMX, 2.5 wt% Estane 5703 and 2.5 wt% nitroplasticizer), which has a relatively high content of plasticizer. The measurements span a wide range of strain rates and temperatures. We have applied time-temperature analysis on the LX-14 mechanical properties, i.e. dynamic mechanical analysis (DMA) measurements and quasi-static uniaxial compression to form satisfactory master curves, and these data are compared with those from PBX 9501. A unique inhomogeneity is observed in the LX-14 compression data as a function of the specimen location.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Williams, M.L., Landel, R.F., Ferry, J.D.: The temperature dependence of relaxation mechanisms in amorphous polymers and other glass forming liquids. J. Am. Chem. Soc. 77, 3701–3707 (1955)
Siviour, C.R., Walley, S.M., Proud, W.G., Field, J.E.: The high strain rate compressive behaviour of polycarbonate and polvinylidine difluoride. Polymer. 46, 12546–12555 (1984)
Menard, K.P.: Dynamic Mechanical Analysis, a Practical Introduction, 2nd edn. CRC Press, Taylor and Francis Group, Boca Raton (2008)
Hoffman, D.M.: Dynamic mechanical signatures of a polyester-urethane and plastic bonded explosives based on this polymer. J. Appl. Polym. Sci. 83, 1009–1024 (2002)
Williamson, D.M., Siviour, C.R., Proud, W.G., Palmer, S.J.P., Govier, R., Ellis, K., Blackwell, P., Leppard, C.: Temperature-time response of a polymer bonded explosive in compression (EDC 37). J. Phys. D. Appl. Phys. 41, 85404–85414 (2008)
Thompson, D.G., DeLuca, R., Brown, G.W.: Time-temperature analysis of plastic-bonded explosives PBX 9501 and PBX 9502 in tension and compression. J. Energ. Mater. 30(4), 299–323 (2012). LA-UR 11-07068
Olinger, B.W., Dobratz, B.M., Skidmore, C.B.: Density variations in cylinders and hemispherical shells of pressed PBX 9501 and PBX 9502. 23th aging, compatibility, and stockpile stewardship conference proceedings, Sandia National Laboratories, SAND2001-8038, CA, November 14–16, p. 133 (2000)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 The Society for Experimental Mechanics, Inc.
About this paper
Cite this paper
Thompson, D.G., Stull, J., Deluca, R., Brown, G. (2018). Time-Temperature Analysis, DMA and Compression in PBXs. In: Arzoumanidis, A., Silberstein, M., Amirkhizi, A. (eds) Challenges in Mechanics of Time Dependent Materials, Volume 2. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-319-63393-0_3
Download citation
DOI: https://doi.org/10.1007/978-3-319-63393-0_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-63392-3
Online ISBN: 978-3-319-63393-0
eBook Packages: EngineeringEngineering (R0)