Abstract
This work was developed at University POLITEHNICA of Bucharest and there were several challenges regarding technological aspects. Finally, we have succeeded in designing and manufacturing a printed object, according to required conditions. In the paper is presented as compared the manufacturing process by adding the material which uses the raw material in the solid state between two systems to print provided with a extruder and with two extruders. Thus, there were designed and printed a couple of physical models used in sporting activities, in accordance with the 3D models. There are presented some remarks about the quality for the two printing systems.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Spanu, A., Dontu, O., Besnea, D., Avram, M.: Improvements on design of proppeller for chemical compound mixer. Rev. Chim. 66(3) (2015)
Besnea, D., Avram, M., Constantin, V., Spanu, A., Chivu, L.: Additive micromanufacturing technologies for composite materials based on nanotubes and polymers. Rom. Rev. Precis. Mech. Opt. Mechatron. 50 (2016)
Cioboata, D., Dontu, O., Besnea, D., Ciobanu, R., Soare, A.: Mechatronic equipment for bearing ring surface inspection. Rom. Rev. Precis. Mech. Opt. Mechatron. 48 (2015)
Berce, P., Balc, N., a.o.: Tehnologii de fabricatie prin adaugare de material si aplicatiile lor, Editura Academiei Romane, Bucuresti (2014)
Prisăcaru, Gh., Bercea, M., Gramescu, B., Ciupe, V.: Mecatronica aplicata, Ed. Academiei Oamenilor de Stiinta din Romania, Bucureşti, ISBN 978-606-8371-43-6 (2011)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Rizescu, D., Rizescu, C.I. (2018). Experimental Research Relating to the Manufacture of Parts by the Addition of Material. In: Gheorghe, G. (eds) Proceedings of the International Conference of Mechatronics and Cyber-MixMechatronics - 2017. ICOMECYME 2017. Lecture Notes in Networks and Systems, vol 20. Springer, Cham. https://doi.org/10.1007/978-3-319-63091-5_9
Download citation
DOI: https://doi.org/10.1007/978-3-319-63091-5_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-63090-8
Online ISBN: 978-3-319-63091-5
eBook Packages: EngineeringEngineering (R0)