Abstract
The paper shows the design, manufacturing and testing of a new type of closed-loop pneumatic positioning system. The design is comprised solely of on/off equipment, which ensures overall low cost. Exhaust flow control and thus speed control for both directions of movement is done by means of several groups of way valves. This ensures that the system can obtain different speeds. Maximum speed is obtained when all of the way valves are open and minimum speed is obtained by using only one way valve. The last version is used close to the desired position to ensure the low speed needed to obtain precision. System control is done by means of a microcontroller that stores and executes the working programs.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Freundt, M., Brecher, C., Wenzel, C., Pyschny, N.: Pneumatic positioning system for precision assembly. In: IFIP - International Federation for Information Processing Book Series, Acchen, Germany (2008). ISBN 978-0-387-77405-3
Edmond, R., Yildirim, H.: A high performance pneumatic force actuator system, part 1—nonlinear mathematical model. J. Dyn. Syst. Meas. Control 122(3) (2000). doi:10.1115/1.2=1286366
Nurtaç Akdag, F., Kuzucu, A.: Highly accurate pneumatic position control, Istanbul. http://digital.ni.com/
Lai, W.K., Rahmat, M.F., Abdul Wahab, N.: Modeling and controller design of pneumatic actuator system with control valve. Int. J. Smart Sens. Intell. Syst. 5(3), 624–644 (2012). Skudai, Malaysia, ISSN 1178-5608
Frederic, A., Xavier, B., Sesmat, S., Bideaux, E.: Non-linear position control of a pneumatic actuator with closed-loop stiffness and damping tuning. In: Control Conference (ECC), Zurch, Switzerland, p. 13936228. IEEE (2013)
Thomas, M.B., Maul, G.P., Jayawiyanto, E.: A novel, low-cost pneumatic positioning system. J. Manuf. Syst. 24(4), 377–387 (2005). Ohio, USA
http://www.smcusa.com/products/CEU2-Controller-for-CE2-Series~20617
Avram, M., Bucșan, C.: Sisteme de acționare pneumatice inteligent. Editura Politehnica PRESS, Bucuresti (2014)
Avram, M., Constantin, V.: Controlling of a pneutronic positioning system without proportional equipment. Rom. Rev. Precis. Mech. Opt. Mechatron. 39, 82–85 (2011). ISSN 1584-5982
Matousek, P.: Microprocessor system designated for control pneumatic actuator. J. Appl. Sci. Thermodyn. Fluid Mech. 5(2) (2011). Liberec, Czech Republic, ISSN 1802 – 9388
Avram, M.: Acționări hidraulice și pneumatic, Ed a 3-a, rev. - București: Editura Universitară, Bibliogr (2005). ISBN 973-7787-40-4
Dihovicni, D., Medenica, M.: Mathematical Modelling and simulation of pneumatic systems. In: Schimdt, M. (ed.) Advances in Computer Science and Engineering, Serbia, 22 March 2011. ISBN 972-953-307-173-2. Blagojevic, V., Stojiljkovic, M.: Mathematical and simulink model of the pneumatic system with bridging of the dual cylinder chambers. Mech. Eng. 5(1), 23–31 (2007). Republic of Serbia, Facta universitatis-series
http://ams.com-AS5304-06_Datasheet_EN_v2
Guenther, R., Perondi, E. C., DePieri, E.R., Valderio, A. C.: Cascade controlled positiong system with LuGre model based friction compensation. Braz. J. Soc. Mech. Sci. Eng. 28(1), 48–57. ISSN 1678-5878. http://dx.doi.org/10.1590/S1678-58782006000100006 (2006)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Avram, M., Constantin, V., Meral, A. (2018). Research Regarding the Design of a Closed-Loop Pneumatic Positioning System Without Using Proportional Equipment. In: Gheorghe, G. (eds) Proceedings of the International Conference of Mechatronics and Cyber-MixMechatronics - 2017. ICOMECYME 2017. Lecture Notes in Networks and Systems, vol 20. Springer, Cham. https://doi.org/10.1007/978-3-319-63091-5_19
Download citation
DOI: https://doi.org/10.1007/978-3-319-63091-5_19
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-63090-8
Online ISBN: 978-3-319-63091-5
eBook Packages: EngineeringEngineering (R0)