Abstract
Material characterization is one of the critical challenges facing the anthropomorphic test device (ATD) modeling community because of the lack of adequate material models and inconsistency between material models available in different computational Finite Element codes. The WIAMan modeling and simulation team systematically characterized the material properties using experimental data for 8 polymeric materials used in key components in the WIAMan ATD Tech Demonstrator. Two modeling teams independently developed finite-element model of the WIAMan ATD in vertical accelerative loading using 2 different modeling platforms (LS-DYNA and Velodyne). The WIAMan FEM has successfully supported the design and development of the WIAMan ATD, the world's first biofidelic ATD for vertical accelerative loading. The approaches to derive the material parameters, constitutive material models, and the fitting algorithms are briefly discussed in this paper. A brief comparison of the whole-body simulation results of an ATD response to those of the corresponding test data due to vertical accelerative loading shows strong confidence in the predictive capability of the WIAMan ATD FE model.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Warrior Injury Assessment Manikin (WIAMan): https://www.fbo.gov/notices/144703326476d3ec9c18778ab0c312df (2016)
Hoppel, C., et al.: Workshop on Numerical Analysis of Human and Surrogate Response to Accelerative Loading: Final Report. Aberdeen Proving Ground (MD): Army Research Laboratory (US), May Report No.: ARL-SR-287 (2014)
DoD Blast Injury Research Program Coordinating Office: Science & Technology Efforts & Programs, Ft. Detrick, MD. US Army Medical Research & Material Command, Prevention, Mitigation, and Treatment of Blast Injuries, FY14 Report to the Executive Agent (2014) https://blastinjuryresearch.amedd.army.mil/assets/docs/ea_report/FY14_Report_to_the_Executive_Agent.pdf
Kleinberger, M., et al.: Second Workshop on Numerical Analysis of Human and Surrogate Response to Accelerative Loading. Aberdeen Proving Ground (MD): Army Research Laboratory (US); Workshop Proceedings (2016)
Chancey, C., McEntire, J., Scherer, R., Frounfelker, P., Tegtmeyer, M.: Program for Warrior Injury Assessment Manikin (WIAMan). Aberdeen Proving Ground (MD): Army Research Laboratory (US) (2011) https://blastinjuryresearch.amedd.army.mil/docs/WIAMan_Project_Plan_Industry_Day_V3.pdf
Crawford, D.M., Chowdhury, M.R., Pietsch, H.A.: Mechanical Properties of Polymers Used for Anatomical Components in the Warrior Injury Assessment Manikin (WIAMan) Technology Demonstrator. White Sands Missile Range (NM): Army Research Laboratory (US); 2016 Jul. Report No.: ARL-TR-7728 (2016)
Sanborn, B., Moy, P., Mrozek, R., Weerasooriya, T.: Effect of Strain Rates on the Compressive Response of Neck Rubber From Humanetics HIII 50th Percentile Male Dummy Under Different Loading Sequences. Aberdeen Proving Ground (MD): Army Research Laboratory (US); 2013 Feb. Report No.: ARL-TR-6336 (2013)
Bell, C., Lister, K., Nochetto, H., Robeck, C., Yow, C.: User’s Manual and Validation, WIAMan Velodyne Model – TDv1.2, Manual Release v1.0 6/30/2016. CORVID Technologies, Mooresville (2016)
Vavalle, N., Shanaman, M., Lomicka, C., Boyle, M., Armiger, R.: User's Manual and Validation Summary; WIAMan ATD Tech Demonstrator LS-Dyna FEM v1.0.0. Johns Hopkins Applied Physics Lab, Laurel (2016)
LS-DYNA Support, Material Models for Polymers. Livermore Software Technology Corporation, Livermore (2016) http://www.dynasupport.com/howtos/material/material-models-for-polymers
Jeong, D., Kwok, P., Canha, J.: Characterization of deformable materials in the THOR dummy, Injury Science Research Proceeding of the 28th International Workshop, pp. 147, Atlanta (2000)
Chowdhury, M., Crawford, D., Shanaman, M., Boyle, M., Armiger, R., Bell, C., Lister, K., Shirley, A.: Polymeric Materials Models in the Warrior Injury Assessment Manikin (WIAMan) Anthropomorphic Test Device (ATD) Tech Demonstrator, Aberdeen Proving Ground (MD): Army Research Laboratory (US); ARL-TR-7927 (2017)
Bergstrom, J.: Mechanics of Solid Polymers Theory and Computational Modeling. William Andrew, San Diego (2015) http://www.worldcat.org/title/mechanics-of-solid-polymers-theory-and-computational-modeling/oclc/913869177
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 The Society for Experimental Mechanics, Inc.
About this paper
Cite this paper
Chowdhury, M.R., Crawford, D.M. (2018). WIAMan ATD Polymeric Material Characterization for Under-Body Blast Environment Simulation. In: Kimberley, J., Lamberson, L., Mates, S. (eds) Dynamic Behavior of Materials, Volume 1. Conference Proceedings of the Society for Experimental Mechanics Series. Springer, Cham. https://doi.org/10.1007/978-3-319-62956-8_10
Download citation
DOI: https://doi.org/10.1007/978-3-319-62956-8_10
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-62955-1
Online ISBN: 978-3-319-62956-8
eBook Packages: EngineeringEngineering (R0)