Abstract
This paper provides the first analysis of process variation effect on the adiabatic logic combined with near-threshold operation. One of the significant concerns is whether reliable performance is retained with voltage scaling. We find that typical variations of process parameters do not affect error-free operation at the minimum-energy frequency. Monte Carlo simulations of a 4-bit full adder using ECRL logic with 0.45 V supply voltage show that in the presence of typical process variations, energy consumption of the circuit operating at 25 MHz increases by 10.2% in the worst case while a 100% error-free operation is maintained. The maximum operating frequency (208 MHz) is reduced to nearly half of the nominal value (385 MHz). To further improve the robustness of the adder against process variation, a bit-serial adiabatic adder is considered with an even lower energy consumption per cycle.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kazmierski, T. J., & Beeby, S. (2011).Energy harvesting systems. New York: Springer.
Hanson, S., Zhai, B., Bernstein, K., Blaauw, D., Bryant, A., Chang, L., et al. (2006) Ultralow-voltage, minimum-energy CMOS.IBM Journal of Research and Development, 50(4.5), 469–490.
Kaul, H., Anders, M., Hsu, S., Agarwal, A., Krishnamurthy, R., & Borkar, S. (2012). Near-threshold voltage (NTV) design: Opportunities and challenges. InProceedings of the 49th Annual Design Automation Conference (pp. 1153–1158). New York: ACM.
Yemiscioglu, G., & Lee, P. (2012). 16-bit clocked adiabatic logic (CAL) logarithmic signal processor. In2012 IEEE 55th International Midwest Symposium on Circuits and Systems (MWSCAS) (pp. 113–116). New York: IEEE.
Teichmann, P. (2011).Adiabatic logic: Future trend and system level perspective (Vol. 34). Dordrecht: Springer Science & Business Media.
Sathe, V. S., Papaefthymiou, M. C., & Ziesler, C. H. (2005). Boost logic: A high speed energy recovery circuit family. InIEEE Computer Society Annual Symposium on VLSI: New Frontiers in VLSI Design (ISVLSI’05) (pp. 22–27). New York: IEEE.
Hu, J., & Yu, X. (2010). Near-threshold adiabatic flip-flops based on pal-2n circuits in nanometer cmos processes. In2010 Second Pacific-Asia Conference on Circuits, Communications and System (PACCS) (Vol. 1, pp. 446–449). New York: IEEE.
Zhao, W., Liu, F., Agarwal, K., Acharyya, D., Nassif, S. R., Nowka, K. J., et al. (2009). Rigorous extraction of process variations for 65-nm CMOS design.IEEE Transactions on Semiconductor Manufacturing, 22(1), 196–203.
Karpuzcu, U. R., Kim, N. S., & Torrellas, J. (2013). Coping with parametric variation at near-threshold voltages.IEEE Micro, 33(4), 6–14.
Moon, Y., & Jeong, D.-K. (1996). An efficient charge recovery logic circuit.IEEE Journal of Solid-State Circuits, 31(4), 514–522.
Vetuli, A., Pascoli, S. D., & Reyneri, L. M. (1996). Positive feedback in adiabatic logic.Electronics Letters, 32(20), 1867–1869.
Amirante, E., Bargagli-Stoffi, A., Fischer, J., Iannaccone, G., & Schmitt-Landsiedel, D. (2001). Variations of the power dissipation in adiabatic logic gates. InProceedings of the 11th International Workshop on Power and Timing Modeling, Optimization and Simulation, PATMOS (Vol. 1, pp. 9–1).
Arizona State Univ. PTM. (2006, February). 65nm BSIM4 model card for bulk CMOS. Arizona State Uni.http://ptm.asu.edu/modelcard/2006/65nm_bulk.pm. Accessed 22 Aug 2017
Khursheed, S., Zhong, S., Aitken, R., Al-Hashimi, B. M., & Kundu, S. (2010) Modeling the impact of process variation on resistive bridge defects. In2010 IEEE International Test Conference (ITC) (pp. 1–10). New York: IEEE.
Asenov, A., Brown, A. R., Davies, J. H., Kaya, S., & Slavcheva, G. (2003). Simulation of intrinsic parameter fluctuations in decananometer and nanometer-scale mosfets.IEEE Transactions on Electron Devices, 50(9), 1837–1852.
Author information
Authors and Affiliations
Corresponding authors
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this chapter
Cite this chapter
Lu, Y., Kazmierski, T.J. (2018). Error-Free Near-Threshold Adiabatic CMOS Logic in the Presence of Process Variation. In: Fummi, F., Wille, R. (eds) Languages, Design Methods, and Tools for Electronic System Design. Lecture Notes in Electrical Engineering, vol 454. Springer, Cham. https://doi.org/10.1007/978-3-319-62920-9_6
Download citation
DOI: https://doi.org/10.1007/978-3-319-62920-9_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-62919-3
Online ISBN: 978-3-319-62920-9
eBook Packages: EngineeringEngineering (R0)