Skip to main content
SpringerLink
Log in

How to Build a Vibration Monitoring System on Your Own?

  • Conference paper
  • First Online:
Advances in Condition Monitoring of Machinery in Non-Stationary Operations (CMMNO 2016)

Part of the book series: Applied Condition Monitoring ((ACM,volume 9))

Abstract

With the ultimate goal of cost reduction of condition monitoring, this paper illustrates how simple data acquisition and processing systems could be designed and realized taking advantage of latest cheap, yet powerful electronic elements. The discussed designs are based on recently popular STM32 and Raspberry Pi boards, and analog MEMS accelerometers. The final prototype design shown in the paper is developed on the F401re version of the STM family, which is working on ARM M4 Cortex processor, and the ADXL001-70 MEMS accelerometer from Analog Devices Ltd. The entire design has been develop using a standard notebook with Windows 10 operating system. The major interest of presenting this design is that in wide range of conditions, the self-made system developed from scratch with elements, price of which does not exceed 15 USD, is capable of generating a frequency spectrum equally significant to a spectrum generated by a full-scale, costly commercial condition monitoring system.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution

Institutional subscriptions

References

  1. Blanke, M., Kinnaert, M., Lunze, J., & Staroswiecki, M. (2006). Diagnosis and fault tolerant control (2nd ed.). Berlin: Springer.

    MATH  Google Scholar 

  2. Hameed, Z., Ahn, S. H., & Cho, Y. M. (2010). Practical aspects of a condition monitoring system for a wind turbine with emphasis on its design, system architecture, testing and installation. Renewable Energy, 5(5), 879–894. doi:10.1016/.renene.2009.10.031.

    Article  Google Scholar 

  3. Isermann, R. (2011). Fault-diagnosis applications. London: Blackwell.

    Google Scholar 

  4. Pan, M., Sas, P., & Van Brussel, H. (1996). Nonstationary time-frequency analysis for machine condition monitoring. doi:10.1109/TFSA.1996.550096.

  5. Wang, W., Tse, P. W., & Lee, J. (2007). Remote machine maintenance system through Internet and mobile communication. International Journal of Advanced Manufacturing Technology, 31, 783–789. doi:10.1007/s00170-005-0236-1.

    Article  Google Scholar 

  6. Albarbar, A., Badri, A., Jyoti, K., & Starr, S. (2008). Performance evaluation of MEMS accelerometers. Measurement, 42, 790–795. doi:10.1016/j.measurement.2008.12.002.

    Article  Google Scholar 

  7. Nagel, D. J., & Zaghloul, M. E. (2001). MEMS: Micro technology, mega impact. IEEE Circuits and Devices Magazine, 17(2). doi:10.1109/101.920875.

  8. Ratcliffe, C., Heider, D., Crane, R., Krauthauser, C., Yoon, M. K., & Gillespie, J. W. (2007). Investigation into the use of low cost MEMS accelerometers for vibration based damage detection. Composite Structures, 82, 61–70. doi:10.1016/j.compstruct.2006.11.012.

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Akademia Górniczo-Hutnicza im. Stanisława Staszica w Krakowie, Wydział Inżynierii Mechanicznej i Robotyki, Katedra Robotyki i Mechatroniki, Aleja Adama Mickiewicza 30, 30-059, Kraków, Poland

    Adam Jabłoński, Michał Żegleń, Wojciech Staszewski, Piotr Czop & Tomasz Barszcz

Authors
  1. Adam Jabłoński
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Michał Żegleń
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Wojciech Staszewski
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Piotr Czop
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Tomasz Barszcz
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Adam Jabłoński .

Editor information

Editors and Affiliations

  1. Faculty of Mechanical Engineering, Silesian University of Technology, Gliwice, Poland

    Anna Timofiejczuk

  2. National School of Engineers of Sfax, Sfax, Tunisia

    Fakher Chaari

  3. Institute of Mining Engineering, Wrocław University of Technology, Wrocław, Poland

    Radoslaw Zimroz

  4. Institute of Mining Engineering, Wrocław University of Technology, Wrocław, Poland

    Walter Bartelmus

  5. National School of Engineers of Sfax, Sfax, Tunisia

    Mohamed Haddar

Rights and permissions

Reprints and permissions

Copyright information

© 2018 Springer International Publishing AG

About this paper

Cite this paper

Jabłoński, A., Żegleń, M., Staszewski, W., Czop, P., Barszcz, T. (2018). How to Build a Vibration Monitoring System on Your Own?. In: Timofiejczuk, A., Chaari, F., Zimroz, R., Bartelmus, W., Haddar, M. (eds) Advances in Condition Monitoring of Machinery in Non-Stationary Operations. CMMNO 2016. Applied Condition Monitoring, vol 9. Springer, Cham. https://doi.org/10.1007/978-3-319-61927-9_11

Download citation

  • DOI: https://doi.org/10.1007/978-3-319-61927-9_11

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-319-61926-2

  • Online ISBN: 978-3-319-61927-9

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation