Advertisement

Assessment of Interlayer Bonding Properties with Static and Dynamic Devices

  • Christiane RaabEmail author
  • Elise Fourquet
  • Omar Abd El Halim
  • Manfred N. Partl
Conference paper
Part of the Sustainable Civil Infrastructures book series (SUCI)

Abstract

Although static interlayer bond testing has been established for quality control during recent years its significance has been questioned and in the wake of this discussion several more realistic dynamic testing devices have been proposed with the purpose of determining the interlayer bond properties not only at failure but also during service life. The Germany testing device developed at the University of Dresden even found entrance into the European test standards and the device has been commercially available for a couple of years. The paper presents an investigation dealing with the importance of interlayer bond testing for performance evaluation and focuses on a comparison of results from static and dynamic interlayer bond testing. Based on the comparison of static and dynamic bond testing the benefits from dynamic testing will be evaluated and a recommendation for the dynamic testing procedure will be presented.

References

  1. Ascher, D., Wellner, F.: Untersuchungen zur Wirksamkeit des Haftverbundes und dessen Auswirkungen auf die Lebensdauer von Asphaltbefestigungen [Investigation of the effectiveness of bonding and its influence on the service life of asphalt pavements]. Technical University of Dresden, Germany, Report No. 13589 BR/1, 100 p. (2007)Google Scholar
  2. Diakhate, M., Phelipot, A., Millien, A., Petit, C.: Shear fatigue behaviour of tack coats in pavements. Road Mater. Pavement Des. 7, 201–222. DOI:ISSN 1468–0629 Google Scholar
  3. Ferrotti, G., D’Andrea, A., Maliszewski, M., Partl, M.N., Raab, C., Sangiorgi, C., Canestrari, F.: Interlaboratory Shear Evaluation or reinforced Bituminous Interfaces. In: Canestrari, F., Partl, M.N. (eds.) 8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials. RILEM Bookseries, vol. 11, Springer (2016), ISBN: 978-94-017-7341-6 (Print) 978-94-017-7342-3 (2015)Google Scholar
  4. Leutner, R.: Untersuchungen des Schichtenverbunds beim bituminösen Oberbau [Investigation of interlayer bonding in bituminous pavements]. Bitumen 3, 84–91 (1979)Google Scholar
  5. Millien, A., Petit, C., Rosier, J.: Comportement au cisaillement des couches d’accrochage dans les chaussée [Shear Bond Behaviour on the Road] rapport interne Laboratoire 3MsGC, Université de Limoges, France. p. 15 (1996)Google Scholar
  6. Mohammad, L.N, Bae, A., Elseifi, M.: Effect of Tack Coat Materials and application rate on the interface shear strength. In: International Conference on Maintenance and Rehabilitation of Pavements and Technological Control (MAIREPAV6), Torino, Sixth Proceedings, Vol. 2, pp. 636–645 (2009)Google Scholar
  7. Partl, M.N., Raab, C.: Shear adhesion between top layers of fresh asphalt pavements in Switzerland. In: Proceedings of 7th CAPSA Conference on Asphalt Pavements for Southern Africa, Victory Falls, Zimbabwe, 29 August–2 September (1999)Google Scholar
  8. Raab, C., Partl, M.N.: Methoden zur Beurteilung des Schichtenverbunds von Asphaltbelägen [Methods for the evaluation of interlayer bonding]. ASTRA-Project FA 12/94, Report No. 442, 118 (1999)Google Scholar
  9. Raab, C., Partl, M.N.Abd, El Halim, A.O.: Evaluation of interlayer shear bond devices for asphalt pavements. Baltic J. Road Bridge Eng. 4(4), 176–195 (2009)CrossRefGoogle Scholar
  10. Swiss Standard, Schweizer Norm SN 671961. Bituminöses Mischgut, Bestimmung des Schichtenverbunds (nach Leutner), Verein Schweizerischer Straßenfachleute VSS (2000)Google Scholar
  11. Swiss Standard SN 670 205a-NA/European Standard, EN 13808. Bitumen and bituminous binders – Framework for specifying cationic bituminous emulsions (2005)Google Scholar
  12. West, R.C., Zhang, J., Moore, J.: Evaluation of bond strength between pavement layers. National Center for Asphalt Technology, NCAT Report 05–08 (2005)Google Scholar

Copyright information

© Springer International Publishing AG 2018

Authors and Affiliations

  • Christiane Raab
    • 1
    Email author
  • Elise Fourquet
    • 2
  • Omar Abd El Halim
    • 3
  • Manfred N. Partl
    • 1
  1. 1.Road Engineering/Sealing ComponentsEMPA Swiss Federal Laboratories for Materials Science and TechnologyDuebendorfSwitzerland
  2. 2.EuroviaParisFrance
  3. 3.Department of Civil and Environmental EngineeringCarleton UniversityOttawaCanada

Personalised recommendations