Abstract
Based on the comparison of the selected characteristics of laboratory prepared modified binders, different version of bituminous binders with added poly-olefin based additive (VP) alone or in combination with SBS polymer were assessed. The basic type of bitumen used for the modification was a paving grade 50/70 to which 5 M% and 6 M% or only 1 M% but in combination with a selected type of SBS (quantity of 3 M%) were added. Frequency sweep test (complex shear modulus) and MSCR test was done on virgin and aged binders. Additionally assessed binder variants were used in a SMA mixture and bitumen properties were compared with performance behavior of the mixture – mainly stiffness, water susceptibility and resistance to permanent deformations.
Keywords
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Designing and Constructing SMA Mixtures—State-of-the-Practice. National Asphalt Pavement Association (NAPA). Lanham, 57 pp. (1999)
Kong, L.Y., Zhou, J.C., Li, W.: Experimental research of APAO modified asphalt. Technol. Hwy. Trans. 10, 63–67 (2005)
Wardlaw, K.R.: Polymer Modified Asphalt Binders: Laboratory and Field Studies of Polyolefin and Latex Modifiers for Asphalt Mixtures, ASTM Publication Code Number (PCN) 04-011080-08, 1992, Philadephia (1992)
Wei, J., Liu, Z., Zhang, Y.: Rheological properties of amorphous poly alpha olefin (APAO) modified asphalt binders. Constr. Build. Mater. 48, 533–539 (2013). ISSN: 0950-0618
Wei, J., et al.: Study on the amorphous poly alpha olefin (APAO) modified asphalt binders. Constr. Build. Mater. 66, 105–112 (2014). ISSN: 0950-0618
Zhu, J., Birgisson, B., Kringos, N.: Polymer modification of bitumen: advances and challenges. Division of Highway and Railway Engineering, Department of Transport Science, KTH Royal Institute of Technology, Sweden (2014)
Acknowledgments
This paper was supported by the research project No TA04031255 of the Technology Agency of the Czech Republic.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this paper
Cite this paper
Valentin, J., Benešová, L., Valentová, T. (2018). Impact of a Poly-olefin Based Additive on Bitumen and Asphalt Mix Performance. In: Struble, L., Tebaldi, G. (eds) Materials for Sustainable Infrastructure. GeoMEast 2017. Sustainable Civil Infrastructures. Springer, Cham. https://doi.org/10.1007/978-3-319-61633-9_4
Download citation
DOI: https://doi.org/10.1007/978-3-319-61633-9_4
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-61632-2
Online ISBN: 978-3-319-61633-9
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)