Abstract
The nanofibres were fabricated by melt electrospinning by reducing the viscosity and increasing the electrical conductivity of the polymer melt. Then the nanofibres were investigated to understand their properties, hence, characterised by different techniques. This chapter deals with the materials used, the equipment and the processing parameters applied in the melt electrospinning experiments. It also includes the equipment and test conditions used for the characterisation of the fibres fabricated. The characterisation techniques include scanning electron microscopy (SEM), optical microscopy (OM), energy dispersive X-ray (EDX), nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR), differential thermal calorimetry (DSC), thermo gravimetric analysis (TGA), X-ray diffraction (XRD), and mechanical characterisation.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Trimble LE (1989) The potential for meltblowning. Meltblown Technology Today. Miller Freeman Publications, San Francisco
Nayak R, Kyratzis IL, Truong YB, Padhye R, Arnold L, Peeters G, Nichols L, O’Shea M (2012) Fabrication and characterisation of nanofibres by meltblowing and melt electrospinning. In: Advanced materials research. Trans Tech Publications, pp 1294–1299
ASTM (2013) D1238-Standard test method for melt flow rates of thermoplastics by extrusion plastometer
Liu Y, Deng R, Hao M, Yan H, Yang W (2010) Orthogonal design study on factors effecting on fibers diameter of melt electrospinning. Polym Eng Sci 50(10):2074–2078. doi:10.1002/pen.21753
Machado A, Maia J, Canevarolo S, Covas J (2004) Evolution of peroxide induced thermomechanical degradation of polypropylene along the extruder. J Appl Polym Sci 91(4):2711–2720
Liang S, Hu D, Zhu C, Yu A (2002) Production of fine polymer powder under cryogenic conditions. Chem Eng Technol 25(4):401–405
Nayak R (2012) Fabrication and characterisation of polypropylene nanofibres by melt electrospinning and meltblowing. RMIT University, Melbourne
Yao L, Haas T, Guiseppi-Elie A, Bowlin G, Simpson D, Wnek G (2003) Electrospinning and stabilization of fully hydrolyzed poly (vinyl alcohol) fibers. Chem Mater 15(9):1860–1864
Lin T, Wang H, Wang X (2004) The charge effect of cationic surfactants on the elimination of fibre beads in the electrospinning of polystyrene. Nanotechnology 15:1375
Ferrer-Balas D, Maspoch ML, Martinez A, Santana O (2001) Influence of annealing on the microstructural, tensile and fracture properties of polypropylene films. Polymer 42(4):1697–1705
Kirshenbaum I, Wilchinsky Z, Groten B (1964) Heat and entropy of fusion of polypropylene. J Appl Polym Sci 8(6):2723–2730
Rabello MS, White JR (1997) Crystallization and melting behaviour of photodegraded polypropylene–II. Re-crystallization of degraded molecules. Polymer 38(26):6389–6399
Nayak R, Padhye R, Kyratzis IL, Truong YB, Arnold L (2012) Recent advances in nanofibre fabrication techniques. Text Res J 82(2):129–147
Ke B (1960) Characterization of polyolefins by differential thermal analysis. J Polym Sci 42(139):15–23
Krupa I, Luyt A (2001) Thermal properties of isotactic polypropylene degraded with gamma irradiation. Polym Degrad Stab 72(3):505–508
Wochowicz A, Eder M (1984) Distribution of lamella thicknesses in isothermally crystallized polypropylene and polyethylene by differential scanning calorimetry. Polymer 25(9):1268–1270
Scholte TG, Meijerink N, Schoffeleers H, Brands A (1984) Mark-Houwink equation and GPC calibration for linear short chain branched polyolefines, including polypropylene and ethylene–propylene copolymers. J Appl Polym Sci 29(12):3763–3782
Frost K, Kaminski D, Kirwan G, Lascaris E, Shanks R (2009) Crystallinity and structure of starch using wide angle X-ray scattering. Carbohydr Polym 78(3):543–548
Farrow G, Preston D (1960) Measurement of crystallinity in drawn polyethylene terephthalate fibres by X-ray diffraction. Br J Appl Phys 11:353
Nayak R, Padhye R, Kyratzis IL, Truong YB, Arnold L (2013) Effect of viscosity and electrical conductivity on the morphology and fibre diameter in melt electrospinning of polypropylene. Text Res J 83(6):606–617
Nayak R, Kyratzis IL, Truong YB, Padhye R, Arnold L (2012) Melt-electrospinning of polypropylene with conductive additives. J Mater Sci 47(17):6387–6396
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this chapter
Cite this chapter
Nayak, R. (2017). Experimental: Melt Electrospinning. In: Polypropylene Nanofibers. Engineering Materials. Springer, Cham. https://doi.org/10.1007/978-3-319-61458-8_3
Download citation
DOI: https://doi.org/10.1007/978-3-319-61458-8_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-61457-1
Online ISBN: 978-3-319-61458-8
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)