Abstract
The indications to use composites as a minimally invasive restorative in the posterior region have increased considerably in the latest years. While not so long ago, composites were considered unsuitable to restore extensive lesions in the posterior, load-bearing area, new clinical evidence shows favorable outcomes for cusp-replacing restorations in posterior composites. These findings are especially important in light of the phasedown of the use of amalgam, which calls for new treatment alternatives in these clinical situations. With the increasing use of composites in extreme indications, convenience and simplicity of these materials have become increasingly important.
This is a preview of subscription content, log in via an institution.
References
Fennis WM, Kuijs RH, Roeters FJ, Creugers NH, Kreulen CM. Randomized control trial of composite cuspal restorations: five-year results. J Dent Res. 2014;93:36–41. doi:10.1177/0022034513510946.
Lynch CD, Wilson NHF. Managing the phase-down of amalgam: part II. Implications for practising arrangements and lessons from Norway. Br Dent J. 2013;215:159–62. doi:10.1038/sj.bdj.2013.788.
Lee MR, Cho BH, Son HH, Um CM, Lee IB. Influence of cavity dimension and restoration methods on the cusp deflection of premolars in composite restoration. Dent Mater. 2007;23:288–95. doi:10.1016/j.dental.2006.01.025.
Park J, Chang J, Ferracane J, Lee IB. How should composite be layered to reduce shrinkage stress: incremental or bulk filling? Dent Mater. 2008;24:1501–5. doi:10.1016/j.dental.2008.03.013.
Kwon Y, Ferracane J, Lee IB. Effect of layering methods, composite type, and flowable liner on the polymerization shrinkage stress of light cured composites. Dent Mater. 2012;28:801–9. doi:10.1016/j.dental.2012.04.028.
Bicalho AA, Pereira RD, Zanatta RF. Incremental filling technique and composite material–part I: cuspal deformation, bond strength, and physical properties. Oper Dent. 2014;39(2):E71–82. doi:10.2341/12-441-L.
Bicalho AA, Valdivia AC, Barreto B de CF, Tantbirojn D, Versluis A, Soares JC. Incremental filling technique and composite material–part II: shrinkage and shrinkage stresses. Oper Dent. 2014;39:E83–92. doi:10.2341/12-442-L.
Soares CJ, Bicalho AA, Tantbirojn D, Versluis A. Polymerization shrinkage stresses in a premolar restored with different composite resins and different incremental techniques. J Adhes Dent. 2013;15:341–50. doi:10.3290/j.jad.a29012.
Goracci C, Cadenaro M, Fontanive L, Giangrosso G, Juloski J, Vichi A, et al. Polymerization efficiency and flexural strength of low-stress restorative composites. Dent Mater. 2014;30:688–94. doi:10.1016/j.dental.2014.03.006.
Ilie N, Stark K. Curing behaviour of high-viscosity bulk-fill composites. J Dent. 2014;42:977–85. doi:10.1016/j.jdent.2014.05.012.
Ilie N, Stark K. Effect of different curing protocols on the mechanical properties of low-viscosity bulk-fill composites. Clin Oral Investig. 2015;19:271–9. doi:10.1007/s00784-014-1262-x.
Tomaszewska IM, Kearns JO, Ilie N, Fleming GJP. Bulk fill restoratives: to cap or not to cap–that is the question? J Dent. 2015;43:309–16. doi:10.1016/j.jdent.2015.01.010.
Ilie N, Bucuta S, Draenert M. Bulk-fill resin-based composites: an in vitro assessment of their mechanical performance. Oper Dent. 2013;38:618–25. doi:10.2341/12-395-L.
Ching K. Deep and fast: Kerr’s SonicFill bulk fill composite. HDA Now. 2012:24–5.
Engelhardt F, Hahnel S, Preis V, Rosentritt M. Comparison of flowable bulk-fill and flowable resin-based composites: an in vitro analysis. Clin Oral Investig. 2016;20(8):2123–30. doi:10.1007/s00784-015-1700-4.
Mahn E. Changing the paradigm of composite placement: Tetric EvoCeram Bulk Fill. Ivoclar Vivadent n.d.;Special Ed:1–24.
Ilie N, Hickel R. Investigations on a methacrylate-based flowable composite based on the SDR™ technology. Dent Mater. 2011;27:348–55. doi:10.1016/j.dental.2010.11.014.
Manhart J, Chen H-Y, Hickel R. Clinical evaluation of the posterior composite Quixfil in class I and II cavities: 4-year follow-up of a randomized controlled trial. J Adhes Dent. 2010;12:237–43. doi:10.3290/j.jad.a17551.
van Dijken JWV, Pallesen U. Posterior bulk-filled resin composite restorations: a 5-year randomized controlled clinical study. J Dent. 2016;51:29–35. doi:10.1016/j.jdent.2016.05.008.
Garoushi S, Säilynoja E, Vallittu PK, Lassila L. Physical properties and depth of cure of a new short fiber reinforced composite. Dent Mater. 2013;29:835–41. doi:10.1016/j.dental.2013.04.016.
El-Damanhoury H, Platt J. Polymerization shrinkage stress kinetics and related properties of bulk-fill resin composites. Oper Dent. 2013;39:374–82. doi:10.2341/13-017-L.
Leprince JG, Palin WM, Vanacker J, Sabbagh J, Devaux J, Leloup G. Physico-mechanical characteristics of commercially available bulk-fill composites. J Dent. 2014;42:993–1000. doi:10.1016/j.jdent.2014.05.009.
Flury S, Hayoz S, Peutzfeldt A, Hüsler J, Lussi A. Depth of cure of resin composites: is the ISO 4049 method suitable for bulk fill materials? Dent Mater. 2012;28:521–8. doi:10.1016/j.dental.2012.02.002.
Finan L, Palin WM, Moskwa N, McGinley EL, Fleming GJP. The influence of irradiation potential on the degree of conversion and mechanical properties of two bulk-fill flowable RBC base materials. Dent Mater. 2013;29:906–12. doi:10.1016/j.dental.2013.05.008.
Benetti AR, Havndrup-Pedersen C, Honoré D, Pedersen M, Pallesen U. Bulk-fill resin composites: polymerization contraction, depth of cure, and gap formation. Oper Dent. 2014;40(2):190–200. doi:10.2341/13-324-L.
Par M, Gamulin O, Marovic D, Klaric E, Tarle Z. Effect of temperature on post-cure polymerization of bulk-fill composites. J Dent. 2014;42:1255–60. doi:10.1016/j.jdent.2014.08.004.
Alrahlah A, Silikas N, Watts DC. Post-cure depth of cure of bulk fill dental resin-composites. Dent Mater. 2014;30:149–54. doi:10.1016/j.dental.2013.10.011.
Bucuta S, Ilie N. Light transmittance and micro-mechanical properties of bulk fill vs. conventional resin based composites. Clin Oral Investig. 2014;18:1991–2000. doi:10.1007/s00784-013-1177-y.
Tarle Z, Attin T, Marovic D, Andermatt L, Ristic M, Tauböck TT. Influence of irradiation time on subsurface degree of conversion and microhardness of high-viscosity bulk-fill resin composites. Clin Oral Investig. 2014;19(4):831–40. doi:10.1007/s00784-014-1302-6.
Garcia D, Yaman P, Dennison J, Neiva G. Polymerization shrinkage and depth of cure of bulk fill flowable composite resins. Oper Dent. 2014;39:441–8. doi:10.2341/12-484-L.
Awad D, Stawarczyk B, Liebermann A, Ilie N. Translucency of esthetic dental restorative CAD/CAM materials and composite resins with respect to thickness and surface roughness. J Prosthet Dent. 2015;113(6):534–40. doi:10.1016/j.prosdent.2014.12.003.
Zorzin J, Maier E, Harre S, Fey T, Belli R, Lohbauer U, et al. Bulk-fill resin composites: polymerization properties and extended light curing. Dent Mater. 2015;31:293–301. doi:10.1016/j.dental.2014.12.010.
Miletic V, Pongprueksa P, de Munck J, Brooks NR, van Meerbeek B. Curing characteristics of flowable and sculptable bulk-fill composites. Clin Oral Investig. 2016;21(4):1201–12. doi:10.1007/s00784-016-1894-0.
Yap AUJ, Pandya M, Toh WS. Depth of cure of contemporary bulk-fill resin-based composites. Dent Mater J. 2016;35:503–10. doi:10.4012/dmj.2015-402.
Musanje L, Darvell BW. Curing-light attenuation in filled-resin restorative materials. Dent Mater. 2006;22:804–17. doi:10.1016/j.dental.2005.11.009.
Leprince JG, Leveque P, Nysten B, Gallez B, Devaux J, Leloup G. New insight into the “depth of cure” of dimethacrylate-based dental composites. Dent Mater. 2012;28:512–20. doi:10.1016/j.dental.2011.12.004.
Van Landuyt KL, Snauwaert J, De Munck J, Peumans M, Yoshida Y, Poitevin A, et al. Systematic review of the chemical composition of contemporary dental adhesives. Biomaterials. 2007;28:3757–85. doi:10.1016/j.biomaterials.2007.04.044.
Son SA, Park JK, Seo DG, Ko CC, Kwon YH. How light attenuation and filler content affect the microhardness and polymerization shrinkage and translucency of bulk-fill composites? Clin Oral Investig. 2016;21(2):559–65. doi:10.1007/s00784-016-1920-2.
Lassila LVJ, Nagas E, Vallittu PK, Garoushi S. Translucency of flowable bulk-filling composites of various thicknesses. Chin J Dent Res. 2012;15:31–5.
Li X, Pongprueksa P, Van Meerbeek B, De Munck J. Curing profile of bulk-fill resin-based composites. J Dent. 2015;43(6):664–72. doi:10.1016/j.jdent.2015.01.002.
Musanje L, Darvell BW. Polymerization of resin composite restorative materials: exposure reciprocity. Dent Mater. 2003;19:531–41. doi:10.1016/S0109-5641(02)00101-X.
Feng L, Carvalho R, Suh BI. Insufficient cure under the condition of high irradiance and short irradiation time. Dent Mater. 2009;25:283–9. doi:10.1016/j.dental.2008.07.007.
Leprince JG, Palin WM, Hadis MA, Devaux J, Leloup G. Progress in dimethacrylate-based dental composite technology and curing efficiency. Dent Mater. 2013;29:139–56. doi:10.1016/j.dental.2012.11.005.
Yu P, Yap A, Wang X, Yu P, Yap AUJ, Wang X-Y. Degree of conversion and polymerization shrinkage of bulk- fill resin-based composites. Oper Dent. 2017;42(1):82–9. doi:10.2341/16-027-L.
Agarwal R, Hiremath H, Agarwal J, Garg A. Evaluation of cervical marginal and internal adaptation using newer bulk fill composites: an in vitro study. J Conserv Dent. 2015;18:56–61. doi:10.4103/0972-0707.148897.
Feng L, Suh BI, Shortall AC. Formation of gaps at the filler-resin interface induced by polymerization contraction stress: gaps at the interface. Dent Mater. 2010;26:719–29. doi:10.1016/j.dental.2010.03.004.
Scotti N, Alovisi C, Comba A, Ventura G, Pasqualini D, Grignolo F, et al. Evaluation of composite adaptation to pulpal chamber floor using optical coherence tomography. J Endod. 2015;42:160–3. doi:10.1016/j.joen.2015.10.006.
Loomans BA, Opdam NJ, Roeters JF, Bronkhorst EM, Plasschaert AJ. Influence of composite resin consistency and placement technique on proximal contact tightness of class II restorations. J Adhes Dent. 2006;8:305–10.
Rullmann I, Schattenberg A, Marx M, Willershausen B, Ernst C-P. Photoelastic determination of polymerization shrinkage stress in low-shrinkage resin composites. Schweiz Monatsschr Zahnmed. 2012;122:294–9.
Kim RJ-Y, Kim Y-J, Choi N-S, Lee I-B. Polymerization shrinkage, modulus, and shrinkage stress related to tooth-restoration interfacial debonding in bulk-fill composites. J Dent. 2015;43(4):430–9. doi:10.1016/j.jdent.2015.02.002.
Kalliecharan D, Germscheid W, Price RB, Stansbury J, Labrie D. Shrinkage stress kinetics of bulk fill resin-based composites at tooth temperature and long time. Dent Mater. 2016;32:1322–31. doi:10.1016/j.dental.2016.07.015.
Fok AS-L. Shrinkage stress development in dental composites–an analytical treatment. Dent Mater. 2013;29:1108–15. doi:10.1016/j.dental.2013.08.198.
Abu-elenain DA, Lewis SH, Stansbury JW. Property evolution during vitrification of dimethacrylate photopolymer networks. Dent Mater. 2013;29:1173–81. doi:10.1016/j.dental.2013.09.002.
Kim HJ, Park SH. Measurement of the internal adaptation of resin composites using micro-CT and its correlation with polymerization shrinkage. Oper Dent. 2014;39:E57–70. doi:10.2341/12-378-L.
Jang J-H, Park S-H, Hwang I-N. Polymerization shrinkage and depth of cure of bulk-fill resin composites and highly filled flowable resin. Oper Dent. 2015;40:172–80. doi:10.2341/13-307-L.
Campodonico C, Tantbirojn D, Olin P, Versluis A. Cuspal deflection and depth of cure in resin-based composite restorations filled by using bulk, incremental and transtooth-illumination techniques. J Am Dent Assoc. 2011;142:1176–82.
Moorthy A, Hogg CH, Dowling AH, Grufferty BF, Benetti AR, Fleming GJP. Cuspal deflection and microleakage in premolar teeth restored with bulk-fill flowable resin-based composite base materials. J Dent. 2012;40:500–5. doi:10.1016/j.jdent.2012.02.015.
Francis AV, Braxton AD, Ahmad W, Tantbirojn D, Simon J, Versluis A. Cuspal flexure and extent of cure of a bulk-fill flowable base composite. Oper Dent. 2015;40(5):515–23. doi:10.2341/14-235-L.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this chapter
Cite this chapter
Van Ende, A. (2018). Bulk-Fill Composites. In: Miletic, V. (eds) Dental Composite Materials for Direct Restorations. Springer, Cham. https://doi.org/10.1007/978-3-319-60961-4_8
Download citation
DOI: https://doi.org/10.1007/978-3-319-60961-4_8
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-60960-7
Online ISBN: 978-3-319-60961-4
eBook Packages: MedicineMedicine (R0)