Abstract
This chapter presents case studies on lifetime and reliability analysis for power electronic devices based on the electrothermal and thermomechanical characteristics. Model outcomes are validated, in real time, using dSPACE system with a physical permanent magnet generator based wind turbine system test rig. Effects of maximum power point tracking algorithms on lifetime and thermal stresses in DC–DC converters under different operating conditions are also studied. Converter’s electrothermal characteristics were first modeled. Subsequently, experiments on photovoltaic solar system were carried out using two different MPPT algorithms, namely, perturb and observe (P&O) and incremental conductance (IC).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
I.V. Banu, R. Beniuga, and M. Istrate, Comparative analysis of the perturb-and-observe and incremental conductance MPPT methods, in 2013 8th International Symposium on Advanced Topics in Electrical Engineering (ATEE), (2013) pp. 1–4
A. Mahdi, W. Tang, H. Wu, and A. Mahdi, Improvement of a MPPT algorithm for PV systems and its experimental validation. Presented at the the 10th international conference on renewable energies and power quality, Granada, Spain, (2010), pp. 1–6
A. Mondal, S. Yuvarajan, MPPT scheme for small scale photovoltaic systems using dSPACE, in 2012 IEEE Green Technologies Conference, (2012), pp. 1–3
F. Casanellas, Losses in PWM inverters using IGBTs. Electr. Power Appl. IEE Proc. 141(5), 235–239 (1994). (Eylül)
N. Mohan, Advanced Electric Drives: Analysis, Control, and Modeling Using MATLAB/Simulink (Wiley, Hoboken, 2014)
M.P. Kaźmierkowski, R. Krishnan, F. Blaabjerg, Control in Power Electronics: Selected Problems (Academic Press, Cambridge, 2002)
Y. Liu, Power Electronic Packaging: Design, Assembly Process, Reliability and Modeling (Springer, New York, 2012)
H. Wang, K. Ma, F. Blaabjerg, Design for reliability of power electronic systems, in IECON 2012—38th Annual Conference on IEEE Industrial Electronics Society, (2012), pp. 33–44
M. Denk, M.-M. Bakran, M. Denk, M.-M. Bakran, Online junction temperature cycle recording of an IGBT power module in a hybrid car. Adv. Power Electron. 2015, e652389 (2015)
K. Mainka, M. Thoben, O. Schilling, Lifetime calculation for power modules, application and theory of models and counting methods, in Proceedings of the 2011–14th European Conference on Power Electronics and Applications (EPE 2011), (2011), pp. 1–8
A. Niesłony, Determination of fragments of multiaxial service loading strongly influencing the fatigue of machine components. Mech. Syst. Sig. Process. 23(8), 2712–2721 (2009). (Kasım)
J. Lemaitre, J.-L. Chaboche, Mechanics of Solid Materials (Cambridge University Press, Cambridge, 1994)
I. Houssamo, F. Locment, M. Sechilariu, Maximum power tracking for photovoltaic power system: development and experimental comparison of two algorithms. Renew. Energy 35(10), 2381–2387 (2010). (Ekim)
Y. Liu, M. Li, X. Ji, X. Luo, M. Wang, Y. Zhang, A comparative study of the maximum power point tracking methods for PV systems. Energy Convers. Manag. 85, 809–816 (2014). (Eylül)
K. Ma, A.S. Bahman, S. Beczkowski, F. Blaabjerg, Complete loss and thermal model of power semiconductors including device rating information. IEEE Trans. Power Electron. 30(5), 2556–2569 (2015)
Q. Chen, X. Yang, Z. Wang, L. Zhang, M. Zheng, Thermal design considerations for integrated power electronics modules based on temperature distribution cases study, in IEEE Power Electronics Specialists Conference, 2007. PESC 2007, (2007), pp. 1029–1035
A. Marinov, V. Valchev, Power loss reduction in electronic inverters trough IGBT-MOSFET combination. Procedia Earth Planet. Sci. 1(1), 1539–1543 (2009). (Eylül)
NASDAQ:FLIR, “FLIR T420 & T440,” (2012) [Online]. http://www.flir.com/uploadedFiles/Thermography_USA/Products/Product_Literature/flir-t420-t440-datasheet.pdf
A.P.C. Rao, Y.P. Obulesh, C.S. Babu, Analysis and effect of switching frequency and voltage levels on total harmonic distortion in multilevel inverters, in 2012 International Conference on Emerging Trends in Electrical Engineering and Energy Management (ICETEEEM), (2012), pp. 339–344
H. Akagi, Active harmonic filters. Proc. IEEE 93(12), 2128–2141 (2005). (Aralık)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this chapter
Cite this chapter
Albarbar, A., Batunlu, C. (2018). Thermal Analysis of Wind and Solar Systems. In: Thermal Analysis of Power Electronic Devices Used in Renewable Energy Systems. Springer, Cham. https://doi.org/10.1007/978-3-319-59828-4_7
Download citation
DOI: https://doi.org/10.1007/978-3-319-59828-4_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-59827-7
Online ISBN: 978-3-319-59828-4
eBook Packages: EngineeringEngineering (R0)