Abstract
Dow Corning Corporation recently examined the use of transition metal-silicon eutectics for producing melt-castable ceramic parts. These materials display good strength, wear and corrosion resistance. The near-eutectic solidification structure has significant impact on the final properties of a cast component. However, direct simulation of the cast structure at industrial scales remains a challenge. The objective of this work is to develop a multi-scale integrated solidification model that includes: density functional theory (DFT) calculations, which enable the computation of difficult-to-measure thermophysical properties; microstructural evolution simulation, which tackles nucleation eutectic growth and segregation during solidification; and casting modeling, which accounts for different boundary conditions including temperature-dependent heat transfer coefficients and geometry. The developed 3D coupled code can predict the correct morphology of the solidified composite and aid in the design and optimization of melt-cast parts based on composition and process parameters in a virtual environment. To verify the model, a mold was designed to achieve quasi-directional solidification within large regions of each casting; hypo- and hyper-eutectic Si–Cr alloys were cast into this custom mold using a vacuum tilt pour unit. Our experimental efforts focused on the quantification of the effects of process conditions on the resulting microstructure of the cast component. Local segregation was examined and compared with the model’s predictions. Results are in agreement with the microstructure observed in our castings.
References
John W. Hutchinson, Henrik M. Jensen, Models of fiber debonding and pullout in brittle composites with friction. Mech. Mater. 9(2), 139–163 (1990)
H. D. Brody, Solute redistribution in dendritic solidification. Doctoral dissertation Massachusetts Institute of Technology, 1965
Georg Kresse, Jürgen Hafner, Ab initio molecular dynamics for liquid metals. Phys. Rev. B 47(1), 558 (1993)
H. Okamoto, Si–Cr phase diagram. ASM Alloy Phase Diagrams Center (2006)
L. Battezzati, A.L. Greer, The viscosity of liquid metals and alloys. Acta Metall. 37(7), 1791–1802 (1989)
Yuzuru Sato et al., Viscosity of molten silicon and the factors affecting measurement. J. Cryst. Growth 249(3), 404–415 (2003)
J. Groh et al., Grain structure and segregation modeling using coupled FV and DP model. In Proceedings of the 8th International Symposium on Superalloy 718 and Derivatives, The Minerals, Metals & Materials Society, 2014
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Wu, C.K., Skinner, K., Becerra, A.E., Shamamian, V.A., Mosbah, S. (2017). Multi-scale Modeling of Quasi-directional Solidification of a Cast Si-Rich Eutectic Alloy. In: Mason, P., et al. Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017). The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-319-57864-4_17
Download citation
DOI: https://doi.org/10.1007/978-3-319-57864-4_17
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-57863-7
Online ISBN: 978-3-319-57864-4
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)