Abstract
This chapter gives a general introduction to the book and describes briefly the context for which the editors established its contents. The characteristics of polysaccharides during fiber processing and several technical challenges are presented alongside opportunities for processing polysaccharide fibers with desired properties. This book is not the first survey dealing with the interest of polysaccharides fibers or materials derived from renewable resources since several monographs have been published in recent years. The common denominator to many of these collective overviews is the biodegradable blends character of the ensuing material. We have attempted to gather in the present volume what we feel is a more comprehensive collection of monographs with the materials science elements as the predominant feature. Of course, the making blends based fiber issues remain essential here, but within the primary focus spelled out in the tittle.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Brydson JA (1981a) Flow properties in flow properties of polymer melts. Van Nostrand Reinhold Company. Chapter 1, pp 1–20
Brydson JA (1981b) Flow through channels of simple cross section in flow properties of polymer melts. Van Nostrand Reinhold Company. Chapter 2:21–34
Fink HP, Ganster J, Lehmann A (2014) Progress in cellulose shaping: 20 years industrial case studies at Fraunhofer IAP. Cellulose 21(1):31–51
Gagov A (2007) Instabilities in elongation flows of polymers at high Deborag Number. PhD Dissertation. University of Akron
Hamaguchi M, Kautto J, Vakkilainen E (2013) Effects of hemicellulose extraction on the kraft mill operation and energy use: review and case study with lignin removal. Chem Eng Res Des 91:1284–1291
Hooshmand S, Aitomaki Y, Skrifvars M, Mathew AP, Oksman K (2014) All-cellulose nanocomposite fibers produced by melt spinning cellulose acetate butyrate and cellulose nanocrystals. Cellulose 21:2665–2678
Hubbe M, Venditti R, Rojas O (2007) What happens to cellulose fibers during papermaking and recycling? A review. Bioresources 2(4):739–788
Peretti SW, Barton R, Mendonca, RT (2016) Lignin as Feedstock for fibers and chemicals in commercializing biobased products: opportunities, challenges, benefits, and risks (pp.): The Royal Society of Chemistry. Chapter 7, pp 132–165
Rathke TD, Hudson SM (1994) Review of chitin and chitosan as fiber and film formers. J Macromol Sci, Part C 34(3):375–437
Sharma CP, Pillai CKS (2009) Chitin and chitosan polymers: chemistry, solubility and fiber formation. Prog Polym Sci 34:641–678
Textile Engineer @ Blogspot http://textileengineerr.blogspot.com/2010/10/types-of-spinning-man-made-fibers.html. Accessed 28 Feb 2016
Zhang X (2014) Fundamentals of fiber science. DEStech Publications, Inc
Ziabicki A (1988) The mechanisms of neck-like deformation in high speed melt Spinning. 1. Rheological and dynamic factors. J Nonnewton Fluid Mech 30:141–155
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer International Publishing AG
About this chapter
Cite this chapter
Aguda, R., Ayoub, A. (2018). The State of the Art: Introduction to Spinning. In: Lucia, L., Ayoub, A. (eds) Polysaccharide-based Fibers and Composites. Springer, Cham. https://doi.org/10.1007/978-3-319-56596-5_1
Download citation
DOI: https://doi.org/10.1007/978-3-319-56596-5_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-56595-8
Online ISBN: 978-3-319-56596-5
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)