Recovery of Metals from Solar Cells by Bioleaching

  • Mital Chakankar
  • Cheer Su
  • Hong HochengEmail author
Conference paper
Part of the Lecture Notes in Mechanical Engineering book series (LNME)


Solar energy is commonly seen as a clean energy source, an alternative to the fossil fuels, as there is no emission of any matter into the environment during operation, endurable operation period, minimum maintenance, robust technique and aesthetic aspects. If one considers the growing use of solar cells, the problem of recycling spent solar cells, the quantities of which will increase rapidly in the coming years, is yet to be solved. Establishing a technology for recycling and reusing the same is thus a necessity. Solar cells contain precious metals including silver, tellurium, and indium along with other heavy metals such as copper, aluminum, lead, arsenic, cadmium, selenium which are hazardous. Limited recycling will result in disposal of these recoverable metals in the waste. There remains the dearth of studies on recycling of old solar cells using microorganisms. In the current study, the recovery of metals from solar cells was investigated using Thiobacillus ferrooxidans micro-organism, and its culture supernatant was found to be effective for bioleaching of metals from solar cell powder. B, Mg, Si, Ni and Zn were removed with 100% efficiency within a reasonable time. T. ferrooxidans recovered 100% Cr, Mn, and Cu at 60 °C, however, only 41.6 and 13.4% of Al and Te were extracted respectively. These results suggest the higher temperature optimum for metal recovery from solar cells in use of the organism. The possible success in this endeavor will allow reuse of waste solar cells without affecting the environment.


Metal recovery Solar cells Bioleaching Thiobacillus ferrooxidans 


  1. 1.
    Amiri F, Yaghmaei S, Mousavi SM (2011) Bioleaching of tungsten-rich spent hydrocracking catalyst using Penicillium simplicissimum. Bioresour Technol 102:1567–1573CrossRefGoogle Scholar
  2. 2.
    Bleiwas DI (2010) Byproduct mineral commodities used for the production of photovoltaic cells. U.S. Geological Survey Circular 1365, 10 p. Accessed 04 Jan 2017
  3. 3.
    Gholami R, Borghei S, Mousavi S (2011) Bacterial leaching of a spent MoeCoeNi refinery catalyst using Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans. Hydrometallurgy 106:26–31CrossRefGoogle Scholar
  4. 4.
    Hocheng H, Chang J, Jadhav U (2012) Micromachining of various metals by using Acidithiobacillus ferrooxidans 13820 culture supernatant experiments. J Cleaner Prod 20:180–185CrossRefGoogle Scholar
  5. 5.
    Hocheng H, Hong T, Jadhav U (2014) Microbial leaching of waste solder for recovery of metal. Appl Biochem Biotechnol 173:193–204CrossRefGoogle Scholar
  6. 6.
    Hocheng H, Su C, Jadhav UU (2014) Bioleaching of metals from steel slag by Acidithiobacillus thiooxidans culture supernatant. Chemosphere 117:652–657CrossRefGoogle Scholar
  7. 7.
    Jadhav U, Hocheng H (2013) Extraction of silver from spent silver oxide zinc button cells by using Acidithiobacillus ferrooxidans culture supernatant. J Cleaner Prod 44:39–44CrossRefGoogle Scholar
  8. 8.
    Jadhav U, Hocheng H (2014) Use of Aspergillus niger 34770 culture supernatant for tin metal removal. Corros Sci 85:248–255CrossRefGoogle Scholar
  9. 9.
    Jadhav U, Hocheng H, Weng W (2013) Innovative use of biologically produced ferric sulfate for machining of copper metal and study of specific metal removal rate and surface roughness during the process. J Mater Process Technol 213:1509–1515CrossRefGoogle Scholar
  10. 10.
    Kang S, Yoo S, Lee J, Boo B, RyuH (2012) Experimental investigations for recycling of silicon and glass from waste photovoltaic modules. Renew Energy 47:152–159Google Scholar
  11. 11.
    Kim S, Bae J, Park H, Cha D (2005) Bioleaching of cadmium and nickel from synthetic sediments by Acidithiobacillus ferrooxidans. Environ Geochem Health 27:229–235CrossRefGoogle Scholar
  12. 12.
    Klugmann-Radziemska E, Ostrowski P (2010) Chemical treatment of crystalline silicon solar cells as a method of recovering pure silicon from photovoltaic modules. Renew Energy 35:1751–1759Google Scholar
  13. 13.
    Mah O (1998) Fundamentals of photovoltaic materials. National Solar Power Research Institute, Inc., 10 p. Accessed 8 May 8 2009
  14. 14.
    U.S. Department of Energy, Solar Technologies Program (2008) Solar FAQs-Photovoltaics—ALL. U.S. Department of Energy. Accessed 1 Apr 2009
  15. 15.
    Wu HY, Ting YP (2006) Metal extraction from MSW incinerator fly ash Chemical leaching and fungal bioleaching. Enzym Microb Technol 38:839–847CrossRefGoogle Scholar
  16. 16.
    Yi YK, Kim HS, Tran T, Hong SK, Kim MJ (2014) Recovering valuable metals from recycled photovoltaic modules. J Air Waste Manage Assoc 64:797–807CrossRefGoogle Scholar

Copyright information

© Springer International Publishing AG 2017

Authors and Affiliations

  1. 1.Department of Power Mechanical EngineeringNational Tsing Hua UniversityHsinchuTaiwan ROC

Personalised recommendations