Abstract
Historically, Fibre Metal Laminates were introduced as a laminated material concept to improve the fatigue and damage tolerance properties of metallic structures in aeronautics. However, the concept can be viewed from different perspectives. This chapter discusses that the FML concept can be seen either as reinforcement of metallic structures or as reinforcement of fibre-reinforced polymer composite structures. Cases are given to illustrate how the concept of damage tolerance can be exploited with FMLs, in particular if the concept is viewed as structural concept rather than a material concept.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Vlot A (2001) GLARE—history of the development of a new aircraft material. Kluwer Academic Publishers, Dordrecht, The Netherlands
Marissen R (1988) Fatigue crack growth in ARALL, a hybrid Aluminium-Aramid composite material, crack growth mechanisms and quantitative predictions of the crack growth rate. PhD Dissertation, Delft University of Technology
Roebroeks GHJJ (1991) Towards GLARE—the development of a fatigue insensitive and damage tolerant aircraft material. PhD Thesis, Delft University of Technology, Delft
Vlot A (2000) Towards technology readiness of fibre metal laminates—GLARE technology development 1997–2000. In: Proceedings of the 22nd international congress of aeronautical sciences, Harrogate, United Kingdom, 1–15
Kuang KSC, Kenny R, Whelan MP, Cantwell WJ, Chalker PR (2001) Residual strain measurement and impact response of optical fibre Bragg grating sensors in fibre metal laminates. Smart Mater Struct 10:338–346
Austin TSP, Singh MM, Gregson PJ, Powell PM (2008) Characterisation of fatigue crack growth and related damage mechanisms in FRP–metal hybrid laminates. Compos Sci Technol 68:1399–1412
Cortes P, Cantwell WJ (2006) The fracture properties of a fibre–metal laminate based on magnesium alloy. Compos B 37:163–170
Alderliesten R, Rans C, Benedictus R (2008) The applicability of magnesium based fibre metal laminates in aerospace structures. Compos Sci Technol 68(14):2983–2993
Burianek DA, Spearing SM (2002) Fatigue damage in titanium-graphite hybrid laminates. Compos Sci Technol 62:607–617
Reyes G, Cantwell WJ (2000) The mechanical properties of fibre-metal laminates based on glass fibre reinforced polypropylene. Compos Sci Technol 60(7):1085–1094
Carrillo JG, Cantwell WJ (2009) Mechanical properties of a novel fiber-metal laminate based on a polypropylene composite. Mech Mater 41(7):828–838
Jensen BJ, Cano RJ, Hales SJ, Alexa JA, Weiser ES, Loos AC, Johnson WS (2009) Fiber Metal Laminates made by the VARTM process. In: Proceedings of the ICCM-17 conference, Edinburgh, Scotland
Department of Defence (2005) Technology readiness assessment (TRA) deskbook. Director, Research Directorate (DRD), Office of the Director, Defense Research and Engineering (DDR&E), USA
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this chapter
Cite this chapter
Alderliesten, R. (2017). Introduction. In: Fatigue and Fracture of Fibre Metal Laminates. Solid Mechanics and Its Applications, vol 236. Springer, Cham. https://doi.org/10.1007/978-3-319-56227-8_1
Download citation
DOI: https://doi.org/10.1007/978-3-319-56227-8_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-56226-1
Online ISBN: 978-3-319-56227-8
eBook Packages: EngineeringEngineering (R0)