Advertisement

Sinusoidal Steady-State Analysis

  • Ali Ümit KeskinEmail author
Chapter
  • 1.1k Downloads

Abstract

Show that rms value of the sinusoidal voltage, v(t) = V p. sin(2πft) is \( V_{\text{p}} /\sqrt 2 \) volts.

Keywords

Frequency Measurement Electronic Circuit Pulse Time Amplitude Measurement Sinusoidal Voltage 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    Mallela VS, Ilankumaran V, Rao NS (2004) Trends in cardiac pacemaker batteries. Indian Pacing Electrophysiol J 4(4):201–212Google Scholar
  2. 2.
    Covidien Data Sheet (2007) LFORCEFX 945605267 Rev 2007/11Google Scholar
  3. 3.
    Maxium KlsMartin Group (2009) Document 02.15 90-288-02-09Google Scholar
  4. 4.
    ERBE Elektromedizin GmbH (2009) Document LIT/5204/01 05/09Google Scholar
  5. 5.
    Association for the Advancement of Medical Instrumentation (AAMI)/American National Standards Institute (ANSI) (1993) Standard for electrosurgical devices. ANSI/AAMI HF18Google Scholar
  6. 6.
    ECRI (1987) The Bovie CSV: still accepted? (consultants corner). Health Dev 6(9–10):340–341Google Scholar
  7. 7.
    Marzetta LA (1972) An evaluation of the three-voltmeter method for AC power measurement. IEEE Trans Instrum Measur IM-21(4):353–357Google Scholar
  8. 8.
    Knecht O et al (2014) Optimization of transcutaneous energy transfer coils for high power medical applications. In: IEEE 15th workshop on control and modeling for power electronics (COMPEL), pp 1–10Google Scholar
  9. 9.
    Elixmann I et al (2012) Transcutaneous energy transfer system incorporating a Datalink for a wearable autonomous implant. In: Ninth international conference on wearable and implantable body sensor networks, pp 1–5Google Scholar
  10. 10.
    Xue R-F et al (2011) High-efficiency transcutaneous wireless energy transfer for biomedical applications. In: Defense science research conference and expo (DSR), pp 1–4Google Scholar
  11. 11.
    Partovi A (2016) Chargers and methods for wireless power transfer. US Patent 9,356,659 B2Google Scholar
  12. 12.
    Hassler WL Jr, Dlugos DF Jr (2009) Low frequency transcutaneous energy transfer to implanted medical device. US Patent 7,599,743 B2Google Scholar
  13. 13.
    D’Ambrosio RL, Kortyka M (2013) Transcutaneous energy transfer coil with integrated radio frequency antenna. US Patent 8,620,447 B2Google Scholar
  14. 14.
    Gaumond RP (1994) Transcutaneous energy and information transfer for biomedical implants. In: Proceedings of 20th annual northeast bioengineering conference, p 42Google Scholar
  15. 15.
    Desai RH, Hassler WL Jr (2007) Spatially decoupled twin secondary coils for optimizing transcutaneous energy transfer (TET) power transfer characteristics. US Patent 7,191,007 B2Google Scholar
  16. 16.
    Wells BP (2005) Series resonant inductive charging circuit. US Patent 6,972,543 B1Google Scholar
  17. 17.
    Seelig A (1997) Method and arrangement for automatic contactless charging. US Patent 5,654,621Google Scholar
  18. 18.
    Klontz KW et al (1992) Contactless battery charging system. US Patent 5,157,319 AGoogle Scholar
  19. 19.
    Bolger JG, Ng LSB (1989) Inductive power coupling with constant voltage output. US Patent 4,800,328 AGoogle Scholar

Copyright information

© Springer International Publishing AG 2017

Authors and Affiliations

  1. 1.Department of Biomedical EngineeringYeditepe UniversityIstanbulTurkey

Personalised recommendations