Abstract
We report the design of a compact sapphire anvil cell for small angle neutron scattering. Based on turnbuckle-opposed anvil technique, the dimensions of this cell are minimized for use with a small-bore magnets using finite element analysis. This cell is the smallest sapphire anvil cell to date. The cell body is approximately 14 mm diameter cylinder and 13 mm length, the overall length of the assembled cell is less than 17 mm. Inside the cell, two spherical-shaped sapphire anvils are used to ensure compactness and anvil’s strength, and at the same time to provide sufficient sample volume for a neutron scattering experiment. The sample volume of the cell used in the SANS experiment was as large as 0.4 mm\(^{3}\), which is approximately 40 times larger than the conventional diamond anvil cell. The cell has been used in a SANS study of a niobium single crystal at D22 Institut Laue-Langevin with the maximum pressure of 4 GPa being achieved with the liquid pressure medium. During the tests the cell demonstrated that it was capable of achieving pressure to 6 GPa with a powder sample.
Keywords
- Small Angle Neutron Scattering
- Diamond Anvil Cell
- Small Angle Neutron Scattering Experiment
- Pressure Capability
- Visible Scratch
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
N. Vennemann, M.D. Lechner, R.C. Oberthür, Polymer 28(10), 1738 (1987). DOI 10.1016/0032-3861(87)90018-8
H. Takeno, M. Nagao, Y. Nakayama, H. Hasegawa, T. Hashimoto, H. Seto, M. Imai, Polym. J. 29(11), 931 (1997). DOI 10.1295/polymj.29.931
G. Pépy, P. Baroni, J. Appl. Cryst. 36(3 Part 1), 814 (2003). DOI 10.1107/S0021889803003935
M. Bonetti, P. Calmettes, Rev. Sci. Instrum. 75(2), 440 (2004). DOI 10.1063/1.1637434
M. Bonetti, P. Calmettes, Rev. Sci. Instrum. 76(4), 043903 (2005). DOI 10.1063/1.1884325
A. Gabke, J. Kraineva, R. Köhling, R. Winter, J. Phys.: Cond. Matter 17(40), S3077 (2005). DOI 10.1088/0953-8984/17/40/011
C. Pfleiderer, A.D. Huxley, S.M. Hayden, J. Phys.: Cond. Matter 17(40), S3111 (2005). DOI 10.1088/0953-8984/17/40/014
J. Kohlbrecher, A. Bollhalder, R. Vavrin, G. Meier, Rev. Sci. Instrum. 78(12), 125101 (2007). DOI 10.1063/1.2817632
I.N. Goncharenko, High Press. Res. 24(1), 193 (2004). DOI 10.1080/08957950410001661882
C. Martin, C.C. Agosta, S.W. Tozer, H.A. Radovan, T. Kinoshota, M. Tokumoto, J. Low Temp. Phys. 138(5), 1025 (2005). DOI 10.1007/s10909-004-2898-8
M. Kano, N. Kurita, M. Hedo, Y. Uwatoko, S.W. Tozer, H.S. Suzuki, T. Onimaru, T. Sakakibara, J. Phys. Soc. Jpn. 76(Suppl. A), 56 (2007). DOI 10.1143/JPSJS.76SA.56
D.E. Graf, R.L. Stillwell, K.M. Purcell, S.W. Tozer, High Press. Res. 31(4), 533 (2011). DOI 10.1080/08957959.2011.633909
M. Kano, H. Mori, K. Matsubayashi, M. Itoi, M. Hedo, T.P. Murphy, S.W. Tozer, Y. Uwatoko, T. Nakamura, J. Phys. Soc. Jpn. 81(2), 024716 (2012). DOI 10.1143/JPSJ.81.024716
L. Chen, N. Kurita, M. Hedo, K. Nakazawa, I. Oguro, Y. Uwatoko, T. Matsumura, M. Tokumoto, S.W. Tozer, J. Phys. Soc. Jpn. 76(Suppl. A), 58 (2007). DOI 10.1143/JPSJS.76SA.58
G. Giriat, W. Wang, J.P. Attfield, A.D. Huxley, K.V. Kamenev, Rev. Sci. Instrum. 81(7), 073905 (2010). DOI 10.1063/1.3465311
R.A. Forman, G.J. Piermarini, J.D. Barnett, S. Block, Science 176(4032), 284 (1972). DOI 10.1126/science.176.4032.284
W.F. Kuhs, H. Ahsbahs, D. Londono, J.L. Finney, Physica B: Condens. Matter 156, 684 (1989). DOI 10.1016/0921-4526(89)90763-1
K.J. Takano, M. Wakatsuki, Rev. Sci. Instrum. 62(6), 1576 (1991). DOI 10.1063/1.1142435
W.B. Daniels, M. Lipp, D. Strachan, D. Winters, Z. Yu, in XIII AIRAPT International Conference on High Pressure Science and Technology (1992), p. 809
W.F. Kuhs, F.C. Bauer, R. Hausmann, H. Ahsbahs, R. Dorwarth, K. Hölzer, High Press. Res. 14(4–6), 341 (1996). DOI 10.1080/08957959608201420
W.F. Kuhs, F.C. Bauer, H. Ahsbahs, G.J. McIntyre, Rev. High Press. Sci. Tech. 7, 307 (1998). DOI 10.4131/jshpreview.7.307
E.R. Dobrovinskaya, L.A. Lytvynov, V. Pishchik, Sapphire Material, Manufacturing, Applications (Springer, New York, 2009)
A.T. Holmes, G.R. Walsh, E. Blackburn, E.M. Forgan, M. Savey-Bennett, Rev. Sci. Instrum. 83(2), 023904 (2012). DOI 10.1063/1.3688657
S. Klotz, Techniques in high pressure neutron scattering (CRC Press, New York, 2012)
M. Eremets, High Pressure Experimental Methods (Oxford University Press, Oxford, 1996)
Acknowledgements
The work presented in this manuscript, as well as many other examples of the instrumentation development for high pressure research, were inspired by Professor Renato Pucci (University of Catania, Italy), whose continuing quest for understanding properties of electronic materials pushed the boundaries of knowledge in this field of fundamental importance. The work was supported by funding from the Engineering and Physical Science Research Council of the United Kingdom (EPSRC). The authors would like to express their gratitude to Robert Louden and David McCabe for their technical assistance during this project.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this chapter
Cite this chapter
Wang, X., Parzyk, N.A., Paul, D.M., Dewhurst, C.D., Giriat, G., Kamenev, K.V. (2017). Miniature Spherical Sapphire Anvil Cell for Small Angle Neutron Scattering. In: Angilella, G., La Magna, A. (eds) Correlations in Condensed Matter under Extreme Conditions. Springer, Cham. https://doi.org/10.1007/978-3-319-53664-4_17
Download citation
DOI: https://doi.org/10.1007/978-3-319-53664-4_17
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-53663-7
Online ISBN: 978-3-319-53664-4
eBook Packages: Physics and AstronomyPhysics and Astronomy (R0)