Abstract
The mechanical properties of shape memory alloys, shape memory polymers and their composites studied by Prof. H. Tobushi are summarized. The main subjects achieved are as follows. (1) Characteristics of shape memory alloy heat engine, (2) Thermomechanical properties of shape memory alloy, (3) Subloop deformation and influence of strain- and stress-rates on deformation, (4) Bending fatigue properties and enhancement of fatigue life of shape memory alloy, (5) Torsional deformation properties of shape memory alloy thin tape and their application, (6) Thermomechanical properties of shape memory polymer, (7) Thermomechanical properties of shape memory polymer foam and secondary shape forming and (8) Shape memory composite and functionally-graded shape memory polymer. The published papers related to these subjects are explained and listed.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Bhattacharyya A, Tobushi H (2000) Analysis of the isothermal mechanical response of a shape memory polymer rheological model. Polymer Eng Sci 40(12):2498–2510
Dunic V, Pieczyska EA, Tobushi H, Stasczak M, Slavkovic R (2014) Experimental and numerical thermomechanical analysis of shape memory alloy subjected tension with various stress and strain rates. Smart Mater Struct 23(5): 055026 (11 pp)
Furuichi Y, Tobushi H, Ikawa T, Matsui R (2003a) Fatigue properties of a TiNi shape-memory alloy wire subjected to bending with various strain ratios. Proc Inst Mech Eng Part I: J Mater Des Appl 217:93–99
Furuichi Y, Tobushi H, Matsui R (2003b) Fatigue properties of a TiNi shape-memory alloy wire in bending. Trans Mater Res Soc Jpn 28(3):615–618
Gadaj SP, Nowacki WK, Tobushi H (1999) Temperature evolution during tensile test of TiNi shape memory alloy. Arch Mech 51(6):649–663
Gadaj SP, Nowacki WK, Pieczyska EA, Tobushi H (2005) Temperature measurement as a new technique applied to the phase transformation study in a TiNi shape memory alloy subjected to tension. Arch Metall Mater 50(3):661–674
Gong JM, Tobushi H, Takata K, Okumura K, Endo M (2001) Superelastic deformation behavior of TiNi shape memory alloy subjected to cyclic loading. Materials Science Research International, Special Tech Publications, vol 2, pp 341–346
Hori T, Tobushi H, Ohashi Y, Saida H (1992) Cyclic deformation of a bias-type two-way shape memory component using TiNi alloy. JSME Int J Ser I 35(2):179–184
Ikai A, Kimura K, Tobushi H (1996) Tig welding and shape memory effect of TiNi shape memory alloy. J Intell Mater Syst Struct 7:646–655
Iwanaga H, Tobushi H, Ito H (1988) Basic research on output power characteristics of a shape memory alloy heat engine (Twin crank heat engine). JSME Int J Ser I 31(3):634–637
Kawaguchi M, Ohashi Y, Tobushi H (1991) Cyclic characteristics of psuedoelasticity of Ti-Ni alloys (Effect of maximum strain, test temperature and shape memory processing temperature). JSME Int J Ser I 34(1):76–82
Kitamura K, Tobushi H, Yoshimi Y, Date K, Miyamoto K (2010) Fatigue properties of cast TiNi shape-memory alloy brain spatula. J Solid Mech Mater Eng 4(6):796–805
Leclercq S, Lexcellent C, Tobushi H, Lin PH (1994) Thermodynamical modelling recovery stress associated with R-phase transformation in TiNi shape memory alloys. Mater Trans JIM 35(5):325–331
Lexcelent C, Tobushi H (1995) Internal loops in pseudoslastic behavior of Ti-Ni shape memory alloys: experiment and modelling. Mecanica 30:459–466
Lexcellent C, Tobushi H, Ziolkowski A, Tanaka K (1994) Thermodynamical model of reversible R-phase transformation in TiNi shape memory alloy. Int J Press Vessel Pip 58:51–57
Lin PH, Tobushi H, Tanaka K, Hattori T, Makita M (1994) Pseudoelastic behavior of TiNi shape memory alloy subjected to strain variations. J Intell Mater Syst Struct 5:694–701
Lin PH, Tobushi H, Ikai A, Tanaka K (1995a) Deformation properties associated with the martensitic and R-phase transformations in TiNi shape memory alloy. J Appl Biomech 10(2):4–11
Lin PH, Tobushi H, Tanaka K, Lexcellent C, Ikai A (1995b) Recovery stress of TiNi shape memory alloy under constant strain. Arch Mech 47(2):281–293
Lin PH, Tobushi H, Tanaka K, Ikai A (1996a) Deformation properties of TiNi shape memory alloy. JSME Int J Ser A 39(1):108–116
Lin PH, Tobushi H, Tanaka K, Hattori T, Ikai A (1996b) Influence of strain rate on deformation properties of TiNi shape memory alloy. JSME Int J Ser A 39(1):117–123
Lin PH, Tobushi H, Hashimoto T (2001) Fatigue properties of TiNi shape memory alloy. Mater Sci Res Int 7(2):103–110
Matsui R, Tobushi H, Furuichi Y, Horikawa H (2004a) Tensile deformation and rotating-bending fatigue properties of a highelastic thin wire, a superelastic thin wire, and a superelastic thin tube of NiTi alloys. Trans ASME J Eng Mater Tech 126:384–391
Matsui R, Tobushi H, Ikawa T (2004b) Transformation-induced creep and stress relaxation of TiNi shape memory alloy. Proc Inst Mech Eng 218(Part L: J Mater: Des Appl):343–353
Matsui R, Tobushi H, Horikawa H, Furuichi Y (2004c) Fatigue properties of highelastic thin wire and superelastic thin tube of NiTi alloy. Trans Mater Res Soc Jpn 29(7):3053–3056
Matsui R, Makino Y, Tobushi H, Furuichi Y, Yoshida F. (2006) Influence of strain ratio on bending fatigue life and fatigue crack growth in TiNi shape-memory alloy thin wires. Mater Trans 47(39):759–765
Matsui R, Tobushi H, Makino Y (2007) Influence of strain ratio on bending fatigue life in TiNi shape memory alloy wire. Key Eng Mater 340–341:1193–1198
Mikuriya S, Nakahara T, Tobushi H, Watanabe H (2000) The estimation of temperature rise in low-cycle fatigue of TiNi shape-memory alloy. JSME Int J Ser A 43(2):166–172
Nowacki WK, Gadaj SP, Pieczyska EA, Tobushi H (2006) Thermomechanical properties of TiNi shape memory alloy. In: Kurzydlowski KJ, Major B, Zieba P (eds) Foundation of materials design. Research Signpost, Kerala, India, pp 195–240
Pieczyska E, Tobushi H (2011) TiNi shape memory alloy tension at various temperatures—Infrared imaging of shape memory effect and pseudoelaticity. Mech Control 30(1):20–26
Pieczyska E, Gadaj S, Nowacki WK, Tobushi H (2004a) Investigation of nucleation and propagation of phase transitions in TiNi SMA. QIRT J 1(1):117–127
Pieczyska EA, Gadaj SP, Nowacki WK, Tobushi H (2004b) Thermomechanical investigations of martensitic and reverse transformations in TiNi shape memory alloy. Bull PAS Tech Sci 52(3):165–171
Pieczyska E, Gadaj S, Nowacki WK, Hoshio K, Makino Y, Tobushi H (2005) Characteristics of energy storage and dissipation in TiNi shape memory alloy. Sci Tech Adv Mater 6:889–894
Pieczyska EA, Gadaj SP, Nowacki WK, Tobushi H (2006a) Phase-transformation fronts evolution for stress- and strain-controlled tension tests in TiNi shape memory alloy. Exp Mech 46:531–542
Pieczyska EA, Gadaj SP, Nowacki WK, Tobushi H (2006b) Stress relaxation during superelastic behavior of TiNi shape memory alloy. Int J Appl Electromagn Mech 23:3–8
Pieczyska EA, Tobushi H, Gadaj SP, Nowacki WK (2006c) Superelatic deformation behaviors based on phase transformation bands in TiNi shape memory alloy. Mater Trans 47(3):670–676
Pieczyska EA, Tobushi H, Gadaj SP, Nowacki WK, Hoshio K, Makino Y (2006d) Martensite and reverse transformations in TiNi SMA during tension test investigated by advanced infrared technique. J JSEM 6(2):175–180
Pieczyska EA, Nowacki WK, Gadaj SP, Tobushi H (2007a) Superelasticity and transformation-induced effects in TiNi SMA. In: Nowacki WK, Zhao H (eds) Multi-phase and multi-component materials under dynamic loading. Inst Fund Tech Res PAS, Warsaw, pp 253–262
Pieczyska E, Nowacki W, Sakuragi T, Tobushi H (2007b) Superelastic deformation properties of TiNi shape memory alloy. Key Eng Mater 340–341:1211–1216
Pieczyska EA, Tobushi H, Nowacki WK, Gadaj SP, Sakuragi T (2007c) Subloop deformation behavior of TiNi shape memory alloy subjected to stress-controlled loadings. Mater Trans 48(10):2679–2686
Pieczyska EA, Tobushi H, Nowacki WK, Gadaj SP, Sakuragi T (2007d) Thermomechanical behavior of TiNi shape memory alloy subjected to various loading conditions: Influence of strain rate and stress rate on deformation behavior. In: Nowacki WK, Zhao H (eds) Multi-phase and multi-component materials under dynamic loading. Inst Fund Tech Res, PAS, Warsaw, pp 263–271
Pieczyska EA, Gadaj SP, Luckner J, Nowacki WK, Tobushi H (2009a) Martensite and reverse transformation during complete cycle of simple shear of NiTi shape memory alloy. Strain 45:93–100
Pieczyska EA, Nowacki WK, Tobushi H, Hayashi S (2009b) Thermomechanical properties of shape memory polymer subjected to tension in various conditions. OIRT J 6(2):189–205
Pieczyska E, Tobushi H, Date K, Miyamoto K (2010) Torsional deformation and fatigue properties of TiNi SMA thin strip for rotary driving element. J Solid Mech. Mater Eng 4(8):1306–1314
Pieczyska EA, Tobushi H, Kulasinski K, Takeda K (2012a) Impact of strain rate on thermomechanical coupling effects in TiNi SMA subjected to compression. Mater Trans 53(11):1905–1909
Pieczyska EA, Tobushi H, Takeda K, Stroz D, Ranachowski Z, Kulasinski K, Kudela S Jr, Luckner J (2012b) Martensite transformation bands studied in TiNi shape memory alloy by infrared and acoustic emission techniques. Kovove Mater 50:309–318
Pieczyska EA, Tobushi H, Kulasinski K (2013) Development of transformation bands in TiNi SMA for various stress and strain rates studied by a fast and sensitive infrared camera. Smart Mater Struct 22:035007 (8 pp)
Pieczyska EA, Kowalczyk-Gajewska K, Maj M, Staszczak M, Tobushi H (2014a) Thermomechanical investigation of TiNi shape memory alloy and PU shape memory polymer subjected to cyclic loading. Proc Eng 74:287–292
Pieczyska EA, Staszczak M, Dunic V, Slavkovic R, Tobushi H, Takeda K (2014b) Development of stress-induced martensitic transformation in TiNi shape memory alloy. J Mater Eng Perfect 23(7):2505–2514
Pieczyska EA, Maj M, Kowalczyk-Gajewska K, Staszczak M, Urbanski L, Tobushi H, Hayashi S, Cristea M (2014c) Mechanical and infrared thermography analysis of shape memory polyurethane. J Mater Eng Perfect 23(4). doi:10.1007/s11665-014-0963-2
Pieczyska EA, Maj M, Kowalczyk-Gajewska K, Staszczak M, Gradys A, Majewski M, Cristea M, Tobushi H, Hayashi S (2015) Thermomechanical properties of polyurethane shape memory polymer—experiment and modelling. Smart Mater Struct 24:045043 (16 pp)
Pieczyska EA, Stasczak M, Maj M. Tobushi H, Hayashi S (2015a) Investigation of thermal effects accompanying tensile deformation of shape memory polymer PU-SMP. Meas Autom Monit 61(6):203–205
Poilane C, Delobelle P, Lexellent C, Hayashi S, Tobushi H (2000) Analysis of mechanical behavior of shape memory polymer membranes by nanoindentation, bulging and point membrane deflection tests. Thin Solid Films 379:156–165
Sawada T, Tobushi H, Kimura K, Hattori T, Tanaka K, Lin PH (1993b) Stress-strain-temperature relationship associated with the R-phase transformation in TiNi shape memory alloy (Influence of shape memory processing temperature). JSME Int J Ser A 36(4):395–401
Staszczak M, Pieczyska EA, Maj M, Urbanski L, Tobushi H, Hayashi S (2013) Mechanical properties and temperature changes of shape memory polymer subjected to tension test. PAK 59(9):1002–1005
Takeda K, Tobushi H, Mitsui K, Nishimura Y, Miyamoto K (2012a) Torsional properties of TiNi shape memory alloy tape for rotary actuator. J Mater Eng Perfect 21(12):2680–2683
Takeda K, Tobushi H, Miyamoto K, Pieczyska EA (2012b) Superelastic deformation of TiNi shape memory alloy subjected to various subloop loadings. Mater Trans 53(1):217–223
Takeda K, Tobushi H, Pieczyska EA (2012c) Transformation-induced creep and creep recovery of shape memory alloy. Materials 5:909–921
Takeda K, Matsui R, Tobushi H, Pieczyska EA (2013a) Creep and Creep recovery under stress-controlled subloop loading in TiNi shape memory alloy. Arch Mech 65(5):429–444
Takeda K, Mitsui K, Tobushi H, Levintant-Zayonts N, Kucharski S (2013b) Influence of nitrogen ion implantation on deformation and fatigue properties of TiNi shape memory alloy wire. Arch Mech 65(5):391–405
Takeda K, Matsui R, Tobushi H, Pieczyska EA (2014) Transformation-induced relaxation and stress recovery of TiNi shape memory alloy. Materials 7:1912–1926
Takeda K, Matsui R, Tobushi H, Homma S, Hattori K (2015a) Enhancement of fatigue life in TiNi shape memory alloy by ultrasonic shot peening. Mater Trans 56(4):513–518
Takeda K, Matsui R, Tobushi H, Homma S, Levintant-Zayonts N, Kucharski S (2015b) Enhancement of bending fatigue life in TiNi shape-memory alloy tape by nitrogen ion implantation. Arch Mech 67(4):293–310
Takeda K, Matsui R, Tobushi H, Hayashi S (2016) Functionally-graded shape memory polymer board. Mech Eng J. doi:10.1299/mej.16-00157
Tanaka K, Tobushi H (1991) A thermomechanical sketch on solid state heat engine based on shape memory effect. Arch Mech 43(1):85–93
Tanaka K, Tobushi H, Iwanaga H (1988) Continuum mechanical approach to thermomechanical behavior of TiNi alloys. In: Proceedings of 31st Japan congress on material research, pp 51–56
Tanaka K, Hayashi T, Itoh Y, Tobushi H (1992) Analysis of thermomechanical behavior of shape memory alloys. Mech Mater 13:207–215
Tanaka K, Hayashi T, Aida Y, Tobushi H (1993) Thermomechanical behavior of an Fe-Cr-Ni-Mn-Si polycrystalline shape memory alloy. J Intell Mater Syst Struct 4:568–573
Tanaka K, Hayashi T, Nishimura F, Tobushi H (1994a) Hysteretic behavior in an Fe-Cr-Ni-Mn-Si polycrystalline shape memory alloy during thermomechanical cyclic loading. J Mater Eng Perfect 3(1):135–143
Tanaka K, Nishimura F, Tobushi H (1994b) Phenomenological analysis on subloops in shape memory alloys due to incomplete transformations. J Intell Mater Syst Struct 5:487–493
Tanaka K, Nishimura N, Hayashi T, Tobushi H, Lexcellent C (1995a) Phenomenological analysis on subloops and cyclic behavior in shape memory alloy under mechanical and/or thermal loads. Mech Mater 19:281–292
Tanaka K, Nishimura F, Tobushi H (1995b) Transformation start lines in TiNi and Fe-based shape memory alloys after incomplete transformations induced by mechanical and/or thermal loads. Mech Mater 19:271–280
Tanaka K, Nishimura F, Tobushi H (1995c) Effect of prior transformation on transformation start stress and temperature in an FE-based shape memory alloy. Z Metallkd 86(3):211–215
Tanaka K, Nishimura F, Tobushi H (1995d) Transformation conditions and subloops in an Fe-based shape memory alloy under thermomechanical loading. J de Physique IV C2 5:C2-477-C2-482
Tanaka K, Nishimura F, Tobushi H, Oberaiger ER, Fischer FD (1995e) Thermomechanical behavior of an Fe-based shape memory alloy: Transformation conditions and hysteresis. J de Physique IV C8 5:C8-463-C8-468
Tanaka K, Nishimura F. Matsui M, Tobushi H, Lin PH (1996) Phenomenological analysis of plateaus on stress-strain hysteresis in TiNi shape memory alloy wires. Mech Mater 24:19–30
Tobushi (2007) Thermomechanical properties of shape memory composite with SMA and SMP. In: Reece PL (ed) Progress in smart materials and structures. Nova Science Publishers, New York, USA, pp 1–13
Tobushi H, Cahoon JR (1985) Mechanical analysis of a solar-powered solid state engine. Trans CSME 9(3):137–141
Tobushi H, Tanaka K (1991) Deformation of a shape memory alloy helical spring (Analysis based on stress-strain-temperature relation). JSME Int J Ser I 34(1):83–89
Tobushi H, Kimura K, Iwanaga H, Cahoon JR (1990a) Basic research on shape memory alloy heat engine (Output power characteristics and problems in development). JSME Int J Ser I 33(2):263–268
Tobushi H, Iwanaga H, Ohashi Y, Inaba A, Kawaguchi M, Saida H (1990b) Cyclic characteristics of shape memory effect in TiNi alloy wires and helical springs. JSME Int J Ser I 33(2):256–262
Tobushi H, Iwanaga H, Tanaka K, Hori T, Sawada T (1991) Deformation behavior of TiNi shape memory alloy subjected to variable stress and temperature. Contin Mech Thermodyn 3:79–93
Tobushi H, Hayashi S, Kojima S (1992a) Mechanical properties of shape memory polymer of polyurethane series (Basic characteristics of stress-strain-temperature relationship). JSME Int J Ser I 35(3):296–302
Tobushi H, Iwanaga H, Tanaka K, Hori T, Sawada T (1992b) Stress-strain-temperature relationships of TiNi shape memory alloy suitable for thermomechanical cycling. JSME Int J Ser I 35(3):271–277
Tobushi H, Ohashi Y, Hori T, Yamamoto H (1992c) Cyclic deformation of TiNi shape-memory alloy helical spring. Exp Mech 32(4):304–308
Tobushi H, Ohashi Y, Saida H, Hori T, Shirai S (1992d) Recovery stress and recovery strain of TiNi shape memory alloy (Cyclic properties under constant residual strain and constant maximum stress). JSME Int J Ser I 35(1):84–90
Tobushi H, Tanaka K, Kimura K, Hori T, Sawada T (1992e) Stress-strain-temperature relationship associated with the R-phase transformation in TiNi shape memory alloy. JSME Int J Ser I 35(3):278–284
Tobushi H, Tanaka K, Hori T, Sawada T, Hattori T (1993) Pseudoelasticity of TiNi shape memory alloy (Dependence on maximum strain and temperature). JSME Int J Ser A 36(3):314–318
Tobushi H, Kimura K, Sawada T, Hattori T, Lin PH (1994) Recovery stress associated with R-phase transformation in TiNi shape memory alloy (Properties under constant residual strain) JSME Int J Ser A 37(2):138–142
Tobushi H, Lin PH, Tanaka K, Lexcellent C, Ikai A (1995a) Deformation properties of TiNi shape memory alloy. J de Physique IV C2(5):409–413
Tobushi H, Lin PH, Hattori T, Makita M (1995b) Cyclic deformation of TiNi shape memory alloy. JSME Int J Ser A 38(1):59–68
Tobushi H, Hara H, Yamada E, Hayashi S (1996a) Thermomechanical properties in a thin film of shape memory polymer of polyurethane series. Smart Mater Struct 5:483–491
Tobushi H, Ikai A, Yamada S., Tanaka K, Lexcellent C (1996b) Thermomechanical properties of TiNi shape memory alloy. J de Physique IV C1 6:C1-385-393
Tobushi H, Yamada S, Hachisuka T, Ikai A, Tanaka K (1996c) Thermomechanical properties due to martensitic and R-phase transformations of TiNi shape memory alloy subjected to cyclic loadings. Smart Mater Struct 5:788–795
Tobushi H, Hayashi S, Ikai A, Hara H (1996d) Thermomechanical properties of shape memory polymers of polyurethane series and their applications. J de Physique IV C1 6:C1-377-C1-384
Tobushi H, Hachisuka T, Yamada S, Lin PH (1997a) Rotating-bending fatigue of a TiNi shape-memory alloy wire. Mech Mater 26:35–42
Tobushi H, Hashimoto T, Hayashi S, Yamada E (1997b) Thermomechanical constitutive modeling in shape memory polymer of polyurethane series. J Intell Mater Syst Struct 8:711–718
Tobushi H, Hachisuka T, Hashimoto T, Yamada S (1998a) Cyclic deformation and fatigue of a TiNi shape-memory alloy wire subjected to rotating bending. Trans ASME J Eng Mater Tech 120:64–70
Tobushi H, Hashimoto T, Ito N, Hayashi S, Yamada E (1998b) Shape fixity and shape recovery in a film of shape memory polymer of polyurethane series. J Intell Mater Syst Struct 9:127–136
Tobushi H, Shimeno Y, Hachisuka T, Tanaka K (1998c) Influence of strain rate on superelastic properties of TiNi shape memory alloy. Mech Mater 30:141–150
Tobushi H, Nakahara T, Hashimoto T, Shimeno Y, Tanaka K (1999a) Fatigue properties of TiNi shape memory alloy and applications to a heat engine and an actuator. Arch Mech 53(6):833–845
Tobushi H, Takata K, Shimeno Y, Nowacki WK, Gadaj SP (1999b) Influence of strain rate on superelastic behavior of TiNi shape memory alloy. Proc Inst. Mech Eng 213(Part L):93–102
Tobushi H, Nakahara T, Shimeno Y, Hashimoto T (2000a) Low-cycle fatigue of TiNi shape memory alloy and formulation of fatigue life. Trans ASME J Eng Mater Tech 122:186–191
Tobushi H, Okumura K, Endo M, Hayashi S (2000b) Thermomechanical properties of polyurethane-shape memory polymer foam. J Adv Sci 12(3):281–286
Tobushi H, Okumura K, Endo M, Hayashi S (2001a) Strain fixity and recovery of polyurethane-shape memory polymer foam. Trans Mater Res Jpn 26(1):351–354
Tobushi H, Okumura K, Endo M, Hayashi S (2001b) Thermomechanical properties of polyurethane-shape memory polymer foam. J Intell Mater Syst Struct 12:283–287
Tobushi H, Okumura K, Hayashi S, Ito N (2001c) Thermomechanical constitutive model of shape memory polymer. Mech Mater 33:545–554
Tobushi H, Okumura K, Nakagawa K, Takata K (2001d) Fatigue properties of TiNi shape memory alloy. Trans Mater Res Soc Jpn 26(1):347–350
Tobushi H, Okumura K, Shimeno Y, Takata K (2001e) Output power characteristics of tilt-disk offset crank heat engine using shape memory alloy. Trans MRSJ 26(1):171–174
Tobushi H, Okumura K, Endo M, Tanaka K (2002a) Deformation behavior of TiNi shape-memory alloy under strain- or stress-controlled conditions. Arch Mech 54(1):75–91
Tobushi H, Okumura K, Endo M, Hayashi S (2002b) Thermomechanical properties of polyurethane-shape memory polymer. In: Sun QP (ed) IUTAM symposium on mechanics of martensitic phase transformation in solids. Kluwer Academic Publishers, The Netherlands, pp 79–86
Tobushi H, Endo M, Ikawa T, Shimada D (2003a) Pseudoelastic behavior of TiNi shape memory alloys under stress-controlled subloop loadings. Arch Mech 55(5–6):519–530
Tobushi H, Ikawa T, Matsui R (2003b) Pseudoelastic behavior of TiNi shape memory alloy in subloop. Trans Mater. Res Soc Jpn 28(3):611–614
Tobushi H, Shimada D, Matsui R, Hayashi S (2003c) Thermomechanical properties of polyurethane-shape memory polymer foam. Trans Mater Res Soc Jpn 28(3):643–646
Tobushi H, Shimada D, Hayashi S, Endo M (2003d) Shape fixity and shape recovery of polyurethane shape-memory polymer foam. Proc Instn. Mech Eng 217(Part L: J Mater: Des Appl):135–143
Tobushi H, Matsui R, Hayashi S, Shimada D (2004) The influence of shape-holding conditions on shape recovery of polyurethane-shape memory polymer foams. Smart Mater Struct 13:881–887
Tobushi H, Hayashi S, Hoshio K, Makino Y, Miwa N (2006a) Bending actuation characteristics of shape memory composite with SMA and SMP. J Intell Mater Syst Struct 17:1075–1081
Tobushi H, Hayashi S, Hoshio K, Miwa N (2006b) Influence of strain-holding conditions on shape recovery and secondary-shape forming in polyurethane-shape memory polymer. Smart Mater Struct 15:1033–1038
Tobushi H, Ejiri Y, Hayashi S, Miwa N (2007a) Shape recovery and secondary-shape forming in polyurethane-shape memory polymer. Key Eng Mater 340–341:1217–1222
Tobushi H, Hayashi S, Hoshio K, Ejiri Y (2007b) Shape recovery and secondary-shape forming of polyurethane-shape memory polymer. In: Nowacki WK, Zhao H (eds) Multi-phase and multi-component materials under dynamic loading. Inst Fund Tech Res PAS, Warsaw, pp 432–440
Tobushi H, Hoshio K, Hayashi S, Miwa N (2007c) Shape memory composite of SMA and SMP and its property. Key Eng Mater 340–341:1187–1192
Tobushi H, Pieczyska EA, Ejiri Y, Sakuragi T (2007d) Thermomechanical properties of shape memory alloy and shape memory polymer. In: Nowacki WK, Zhao H (eds) Multi-phase and multi-component materials under dynamic loading. Inst Fund Tech Res PAS, Warsaw, pp 53–62
Tobushi H, Sakuragi T, Sugimoto Y (2008a) Deformation and rotary driving characteristics of a shape-memory alloy thin strip element. Mater Trans 49(1):151–157
Tobushi H, Hayashi S, Hoshio K, Ejiri Y (2008b) Shape recovery and irrecoverable strain control in polyurethane shape-memory polymer. Sci Technol Adv Mater 9:015009 (7 pp)
Tobushi H, Furuichi Y, Sakuragi T, Sugimoto Y (2009a) Bending fatigue properties of a superelastic thin tube and a high-elastic thin wire of TiNi alloy. Mater Trans 50(8):2043–2049
Tobushi H, Hayashi S, Sugimoto Y, Date K (2009b) Performance of shape memory composite with SMA and SMP. Solid State Phenom 154:65–70
Tobushi H, Hayashi S, Sugimoto Y, Date K (2009c) Two-way bending properties of shape memory composite with SMA and SMP. Materials 3:1180–1192
Tobushi H, Pieczyska E, Ejiri Y, Sakuragi T (2009d) Thermomechanical properties of shape-memory alloy and shape polymer and their composites. Mech Adv Mater Struct 16:236–247
Tobushi H, Pieczyska EA, Nowacki WK, Sakuragi T, Sugimoto Y (2009e) Torsional deformation and rotary driving characteristics of SMA thin strip. Arch Mech 61(3–4):241–257
Tobushi H, Pieczyska EA, Nowacki WK, Sugimoto Y (2009f) SMA thin strip for rotary-driving element. Solid State Phenom 154:47–52
Tobushi H, Date K, Miyamoto K (2010a) Characteristics and development of shape-memory alloy heat engine. J Solid Mech Mater Eng 4–7:1094–1102
Tobushi H, Hayashi S, Sugimoto Y, Date K (2010b) Fabrication and two-way deformation of shape memory composite with SMA and SMP. Mater Sci Forum 638–642:2189–2194
Tobushi H, Kitamura K, Yoshimi Y, Date K (2010c) Bending deformation and fatigue properties of precision-casting TiNi shape memory alloy brain spatula. In: Cismasiu C (ed) shape memory alloy. Sciyo, Rijeka, Croatia, pp 41–60
Tobushi H, Pieczyska EA, Nowacki WK, Date K, Miyamoto K (2010d) Two-way rotary shape memory alloy thin strip actuator. J Theory Appl Mech 48(4):1043–1056
Tobushi H, Hayashi S, Pieczyska E, Date K, Nishimura Y (2011a) Three-way shape memory composite actuator. Mater Sci Forum 674:225–230
Tobushi H, Hayashi S, Pieczyska E, Date K, Nishimura Y (2011b) Three-way actuation of shape memory composite. Arch Mech 63(5–6):443–457
Tobushi H, Kitamura K, Yoshimi Y, Miyamoto K, Mitsui K (2011c) Mechanical properties of cast shape memory alloy for brain spatula. Mater Sci Forum 674:213–218
Tobushi H, Miyamoto K, Nishimura Y, Mitsui K (2011d) Novel shape memory actuators. J Theory Appl Mech 49(3):927–943
Tobushi H, Pieczyska E, Miyamoto K, Mitsui K (2011e) Shape-memory alloy thin strip rotary actuator. Mater Sci Forum 674:219–224
Tobushi H, Mitsui K, Takeda K, Kitamura K, Yoshimi Y (2012) Performance and design of precision-cast shape memory alloy brain spatula. J Theory Appl Mech 50(3):855–869
Tobushi H, Matsui R, Takeda K, Pieczyska EA (2013a) Mechanical properties of shape memory materials. Nova Science Publishers, New York
Tobushi H, Pieczyska E, Miyamoto K, Mitsui K (2013b) Torsional deformation characteristics of TiNi SMA tape and application to rotary actuator. J Alloys Compd 577S:S745–S748
Tobushi H, Takeda K, Matsui R, Hayashi S (2013c) Shape-memory composite actuator with SMA and SMC. ICCM19:9285–9295
Tobushi H, Matsui R, Takeda K (2015) Mechanical properties of shape memory alloy and polymer. In: Altenbach H, Matsuda T, Okumura D (eds) From creep damage mechanics to homogenization methods. Springer, Switzerland, pp 461–487
Tobushi H, Matsui R, Takeda K, Hayashi S (2016) Multiway bending actuation of shape-memory composite belt. In: Tandon GP, McClung AJW, Baur JW (eds) Shape-memory polymers for aerospace applications. DEStech Publications, Lancaster, USA, pp 347–365
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this chapter
Cite this chapter
Matsui, R., Takeda, K., Tobushi, H. (2017). Mechanical Properties of Shape Memory Alloys and Polymers—A Review on the Study by Prof. Tobushi. In: Sun, Q., Matsui, R., Takeda, K., Pieczyska, E. (eds) Advances in Shape Memory Materials. Advanced Structured Materials, vol 73. Springer, Cham. https://doi.org/10.1007/978-3-319-53306-3_8
Download citation
DOI: https://doi.org/10.1007/978-3-319-53306-3_8
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-53305-6
Online ISBN: 978-3-319-53306-3
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)