Advertisement

Water Content Effect on the Fault Rupture Propagation Through Wet Soil-Using Direct Shear Tests

  • M. Ahmadi
  • M. Moosavi
  • M. K. Jafari
Conference paper
Part of the Springer Series in Geomechanics and Geoengineering book series (SSGG)

Abstract

Some fault rupture propagation tests were conducted in which wet soil were used to model a cohesion soil in real condition. Results of these tests show that by increase of water content, the shear band of fault rupture propagate in a narrower zone so the distorted area above the ground was decreased. Ductile soil has the ability to deform more before a developed shear band reaches to the surface. This behavior can be interpreted by strength parameters of the wet soil. For this purpose, some series of direct shear tests were conducted, studying the effect of water content on some strength parameter of granular soil. All of these tests were carried out in both low and high vertical stress. The results indicated that increase of water content to a certain value lead to increase in internal friction angle and beyond this limit it decreases. The response of cohesion was vice versa. Also the internal friction angle was increased as the vertical stress decreased. The results were discussed in both high and low vertical stress.

Keywords

Vertical Stress Internal Friction Angle Direct Shear Test Fault Rupture Frictional Angle 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. Anastasopoulos I, Gazetas G, Bransby MF, Davies MC, Nahas A (2007) Fault rupture propagation through sand: finite-element analysis and validation through centrifuge experiments. J Geotech Geoenviron Eng 113(8):943–958. doi: 10.1061/(ASCE)1090-0241(2007)133:8(943) CrossRefGoogle Scholar
  2. Fadaee M, Anastasopoulos I, Gazetas G, Jafari M, Kamalian M (2013) Soil bentonite wall protects foundation from thrust faulting: analyses and experiment. Earthq Eng Eng Vib 12(3):473–486. doi: 10.1007/s11803-013-0187-8 CrossRefGoogle Scholar
  3. Fukushima S, Tatsuoka F (1984) Strength and deformation characteristics of saturated sand at extremely low pressures. Soils Found 24(4):30–48CrossRefGoogle Scholar
  4. Lin M, Chung C, Jeng F (2006) Deformation of overburden soil induced by thrust fault slip. Eng Geol 88(1–2):70–89CrossRefGoogle Scholar
  5. Loukidis D, Bouckovalas G, Papadimitriou A (2009) Analysis of fault rupture propagation through uniform soil cover. Soil Dyn Earthq Eng 29:1389–1404CrossRefGoogle Scholar
  6. Moosavi SM, Jafari MK, Kamalian M, Shafiee A (2010) Experimental investigation of reverse fault rupture – rigid shallow foundation interaction. Int J Civil Eng 8(2):85–98Google Scholar
  7. Ng CW, Cai QP, Hu P (2012) Centrifuge and numerical modeling of normal fault-rupture propagation in clay with and without a preexisting fracture. J Geotech Geoenviron Eng 138(12):1492–1502. doi: 10.1061/(ASCE)GT.1943-5606.0000719 CrossRefGoogle Scholar
  8. Rojhani M, Moradi M, Galandarzadeh A, Takada S (2012) Centrifuge modeling of buried continuous pipelines subjected to reverse faulting. Can Geotech J 49:659–670. doi: 10.1139/T2012-022 CrossRefGoogle Scholar

Copyright information

© Springer International Publishing AG 2017

Authors and Affiliations

  1. 1.International Institute of Earthquake Engineering and Seismology (IIEES)TehranIran

Personalised recommendations