Abstract
Recent developments in materials science have increased the interest towards the bulk (energetic /energy) materials and the technologies for their production. The unique properties which are typical for the composites fabricated in Ti–Al–B–C systems make them very attractive for aerospace, power engineering, machine and chemical applications. In addition, aluminum matrix composites (AMCs) have great potential as structural materials due to their excellent physical, mechanical and tribological properties. Because of good combinations of thermal conductivity and dimensional stability AMCs are found to be also potential materials for electronic packaging/application. The methodology/technology for the fabrication of bulk materials from ultrafine-grained powders of Ti–Al–B–C system are described in this paper. It includes the results of theoretical and experimental investigation for selection of powder compositions, determination of thermodynamic conditions for blend preparation and optimal technological parameters for mechanical alloying and adiabatic compaction. For the consolidation of mixtures, the explosive compaction technology was applied at room temperatures.
This is a preview of subscription content, log in via an institution.
References
The Second World Space Congress, held October 10–19, 2002 in Houston, TX, USA, p. I-4-03IAF. Abstracts, 34th COSPAR Scientific Assembly.
Mania, R., Dabrowski, M., et al. (2003). Some application of TiAl micropowders produced by self-propagating high temperature syntheses. International Journal of Self-Propagating High-Temperature Synthesis, 12(3), 159–164.
Levashov, E. A., Senatulin, B. R., et al. (2002). Peculiarities of the functionally graded targets in combustion wave of the SHS-system with working layer Ti-Si-B, Ti-Si-C, Ti-B-N, Ti-Al-B, Ti-C, book of abstracts. In IV International Symposium on SHS, Technion (p. 35). Haifa, Israel, 17–21 February, 2002.
Merzhanov, A. G., Pityulin, A. N. (1995). Self-propagating high-temperature synthesis in production of functionally graded materials. In Proceedings of 3rd International Symposium on FGM (pp. 87–94). Lausanne, Switzerland.
Pityulin, A. N., Sytschev, A. E., Rogachev, A. S., Merzhanov, A. G. (1995). One-stage production of functionally graded materials of the metal-hard alloy type by SHS compaction. In Proceedings of 3rd International Symposium on FGM (pp. 101–108). Lausanne, Switzerland.
Tavadze. (2005). A new SHS method for special ferroalloys production. First Armenian-Israel workshop on SHS (AIW-2005). Yerevan (p. 33).
Das, N., Dey, G. K., et al. (2005). On amorphization and nanocomposite formation in Al-Ni-Ti system by mechanical alloying. PRAMANA Journal of Physics, Indian Academy of Sciences, 65(5), 831–840.
Zhang, Z. H., Han, B. Q. (2006). Syntheses of nanocrystalline aluminum matrix composites reinforced with in situ devitrified Al-Ni-La amorphous particles. University of California Postprints, Paper 39.
Hebeisen, J., Tylus, P., Zick, D., Mukhopadhyay, D. K., Brand, K., Suryanarayana, C., et al. (1996). Hot Isostatic pressing of nanostructured γ-TiAl powders. Metals and Materials, 2(2), 71–74.
Groza, J. R. (1993). Nonconventional pressure-assisted powder consolidation methods. Journal of Materials Engineering and Performance, 2(2), 283–290.
Suryanarayana, C., Klassen, T., Ivanov, E. (2011). Syntheses of nanocomposites and amorphous alloys by mechanical alloying. Journal of Materials Science, 46, 6301–6315.
Prummer, R. (1987). Explosive working of porous materials. Berlin, Heidelberg, New York: Springer.
Thadhani, N. N. (2005). Shock-induced chemical reactions in exotermic intermetallic-forming powder mixture systems. In Proceeding of ICCES’05 (p. 394), December 1–10, 2005, India.
Kecskes, L., Peikrishvili, A., Chikhradze, N., Dgebuadze, A. (2002). Hot explosive fabrication of nano-crystalline W-based powders. In Advances in Powder Metallurgy & Particulate Materials. Orlando, USA.
Kecskes, L. J., Woodman, R. H., Chikhradze, N., Peikrishvili, A. (2004). Processing of aluminum nickelides by hot explosive consolidation. International Journal of Self-Propagating High-Temperature Synthesis, 13, #1.
Chikhradze, N., Staudhammer, K., Marquis, F., Chikhradze, M. (2005). Explosive compaction of Me-Boron containing composite powders. In Proceeding of Powder Metallurgy World Congress & Exhibition, PM2005 (Vol. 3, pp. 163–173). Prague, Czech Republic.
Mamniashvili, G., Chikhradze, N., et al. (2006). Shock-wave compaction and investigation of Fe-Ni-Al powder composition. Physica Mettallov I Metalovedenie.
Chikhradze, N., Politis, C., Henein, H. (2010). Formation of ultrafine grained bulk Si and Si-Ge alloys by shock wave compaction technology. In Proceeding of PM2010 World Congress—Nanotechnology (Vol. 1, pp. 321–326).
Tavadze, G., Oniashvili, G. (1998). SHS technology—Resource save technology for obtaining materials. Metsniereba da teqnika, #6.
Lu, L., Lai, M. O., & Wang, H. Y. (2000). Syntheses of titanium diboride TiB2 and Ti-Al-B metal matrix composites. Journal of Materials Science (Springer, Netherlands), 35, #1.
Oniashvili. Design and SHS of new functionally gradient materials (FGM). In VII International Symposium on SHS. Crakow.
Acknowledgements
The work is supported by the research grants of Shota Rustaveli National Science Foundation #YS15_2.2.10_84.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Chikhradze, M., Marquis, F.D.S. (2017). Synthesis of Energetic Composites in Ti–Al–B–C System by Adiabatic Explosive Compaction. In: Meyers, M., et al. Proceedings of the 3rd Pan American Materials Congress. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-319-52132-9_42
Download citation
DOI: https://doi.org/10.1007/978-3-319-52132-9_42
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-52131-2
Online ISBN: 978-3-319-52132-9
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)