Advertisement

Service Experience and Diagnostic Testing of Power Switching Devices

  • Kaveh NiayeshEmail author
  • Magne Runde
Chapter
Part of the Power Systems book series (POWSYS)

Abstract

The previous chapters looked into various aspects of current interruption in power systems, such as different switching duties and the associated recovery voltages, properties of the electric arc, and design and technologies applied in switching devices.

Keywords

Circuit Breaker Switching Operation Switching Device Command Signal Overhead Line 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    For more information, visit the CIGRÉ webpage www.cigre.org
  2. 2.
    IEC Standard 62271. High voltage switchgear and controlgearGoogle Scholar
  3. 3.
    Cigré WG (1981) The first international enquiry on circuit-breaker failures and defects in service. Electra 79:21–91Google Scholar
  4. 4.
    CIGRÉ WG (1994) Final report of the second international enquiry on high voltage circuit-breaker failures and defects in service. CIGRE Techn Broch, vol 83Google Scholar
  5. 5.
    CIGRÉ WG (2012) Final report of 2004–2007 international enquiry on reliability of high voltage equipment, Part 2—Reliability of high voltage circuit breakers. CIGRE Techn Broch, vol 510Google Scholar
  6. 6.
    CIGRÉ WG (2000). User guide for the application of monitoring and diagnostic techniques for switching equipment for rated voltages of 72.5 kV and above. CIGRE Techn Broch, Vol 167Google Scholar

Copyright information

© Springer International Publishing AG 2017

Authors and Affiliations

  1. 1.Norwegian University of Science and TechnologyTrondheimNorway
  2. 2.SINTEF Energy ResearchTrondheimNorway

Personalised recommendations