Abstract
The analysis of the impact of the method of determining the coefficient of load distribution across the width of the tooth K Hß on its value and the value of safety factors on pitting SH and tooth fracture at the base of SF were presented. Three methods were analyzed. Described important differences in the methods adopted for analysis. Comparisons analyzed methods made on the example of the calculation of two-stage bevel-helical gear ratio of i = 4.10 and transferring the power of 580 kW. The results of analysis are shown graphically in two drawings and given appropriate proposals.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
PN-ISO 6336-1: 2000: Calculation of load capacity of spur and helical gears. Basic principles, introduction and general influence factors.
PN-ISO 6336-2: 2000. Calculation of load capacity of spur and helical gears. Calculation of surface durability (pitting).
PN-ISO 6336-3: 2001. Calculation of load capacity of spur and helical gears. Calculation of tooth bending strength.
Dziama A., Michniewicz M., Niedźwiecki A.: Przekładnie zębate, PWN, Warszawa, 1989.
Ustinenko V. L., Naprjažennoe sostojanie zubev cylindričeskich priamozubnych koles. Mašinostroenie, Moskva, 1982.
Krawiec S., Obliczenia konstrukcyjne przekładni pasowych i zębatych wspomagane mikrokomputerem, Politechnika Wrocławska, Wrocław, 1991.
Maziarz M., Kuliński S.: Obliczenia wytrzymałościowe przekładni zębatych według norm ISO, AGH Kraków, 2005.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this paper
Cite this paper
Krawiec, S., Krawiec, M., Leśniewski, T. (2017). Correlation of Gears Strength and Methods of Determining the Coefficient of Load Distribution Along the Tooth Width. In: Rusiński, E., Pietrusiak, D. (eds) Proceedings of the 13th International Scientific Conference . RESRB 2016. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-319-50938-9_28
Download citation
DOI: https://doi.org/10.1007/978-3-319-50938-9_28
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-50937-2
Online ISBN: 978-3-319-50938-9
eBook Packages: EngineeringEngineering (R0)