Abstract
This chapter presents a study of the W3-Sokol main rotor equipped with Gurney flaps. The effect of an active Gurney is tested at low and high forward flight speeds to draw conclusions about the potential enhancement of the rotorcraft performance for the whole flight envelope. The effect of the flap on the trimming and handling of a full helicopter is also investigated. In the previous chapter, the Gurney proved to be efficient at medium to high advance ratios, where the power requirements of the rotor were decreased by up to 3.3%. However, the 1/rev actuation of the flap might be an issue for the trimming and handling of the helicopter. The current study builds on the idea that any active mechanism operating on a rotor could alter the dynamics and the handling of the helicopter. A closed loop actuation of the Gurney flap was put forward based on a pressure divergence criterion, and it led to further enhancement of the aerodynamic performance. Next, a generic light utility helicopter was built using 2D aerodynamics of the main aerofoil section of the W3-Sokol blade along with a robust controller, and the response of the rotorcraft to control inputs was tested. This analysis proved that the 1/rev actuation of the Gurney did not alter the handling qualities of the helicopter, and as a result, it can be implemented as a flow control mechanism for aerodynamic enhancement and retreating blade stall alleviation.
Keywords
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Abbreviations
- c p :
-
Pressure coefficient
- c T :
-
Thrust coefficient
- c Q :
-
Torque coefficient
- c t :
-
Sectional thrust coefficient
- c m :
-
Sectional moment coefficient
- c q :
-
Sectional torque coefficient
- P i :
-
Ideal induced rotor power [W]
- P :
-
Actual rotor power [W]
- R :
-
Aspect ratio of the blade
- α :
-
Angle of incidence [degrees]
- β or β 0 :
-
Flapping angles [degrees]
- γ :
-
Rotor blade Lock number
- θ or θ 0 :
-
Collective angle at 75%R [degrees]
- λ :
-
Inflow factor
- μ :
-
Advance ratio
- ρ :
-
Density [kg/m3]
- σ :
-
Rotor solidity, σ = N b c/πR
- CFD:
-
Computational fluid dynamics
- MRB:
-
Main rotor blade
References
ADS-33E-PRF (2000) Aeronautical design standard performance specification handling qualities requirements for military rotorcraft. Aviation Engineering Directorate, Redstone Arsenal, Alabama, March 21st, 2000
ART (nd) Advanced Rotorcraft Technology. Von www.art.com abgerufen
Garcia AJ, Barakos GN (2015) Hover performance predictions for the S-76 main rotor blade. In: AIAA 53th Aerospace Science Meeting and Exhibit, Kissimmee, FL
Garkushenko VI, Vinogradov SS, Barakos GN (2014) Robust control synthesis for an unmanned helicopter. In: 40th European Rotorcraft Forum, Southampton, UK
Kufeld R, Balough D, Cross J, Studebaker K, Jennison C, Bousman W (1994) Flight testing of the UH-60A airloads aircraft. In: American helicopter society 50th annual proceedings, Washington, DC
Woodgate MA, Barakos GN (2012) Implicit computational fluid dynamics methods for fast analysis of rotor flows. AIAA J 50(6):1217–1244
Yeo H, Bousman W, Johnson W (2004) Performance analysis of a utility helicopter with standard and advanced rotors. J Am Helicopter Soc 49(3):250–270
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this chapter
Cite this chapter
Pastrikakis, V., Barakos, G. (2017). Effect of Gurney Flaps on Overall Helicopter Flight Envelope. In: Doerffer, P., Barakos, G., Luczak, M. (eds) Recent Progress in Flow Control for Practical Flows. Springer, Cham. https://doi.org/10.1007/978-3-319-50568-8_5
Download citation
DOI: https://doi.org/10.1007/978-3-319-50568-8_5
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-50567-1
Online ISBN: 978-3-319-50568-8
eBook Packages: EngineeringEngineering (R0)