Abstract
Intrusion moulding technology can convert waste plastic into a strong, lightweight construction material, for use as an alternative to wood or concrete. Using a combination of published research, independent testing and an industrial case study to demonstrate the benefits, this chapter will propose that the construction industry should consider intrusion moulded waste plastic as a first choice construction material.
Recycled waste plastic is particularly suitable in applications involving contact with earth and/or water as the material does not require chemical preservatives and is resistant to moisture, micro-biological attack and acid soil. From an international perspective, recycled plastic is an option in areas where wood is subject to termite attack and avoids the problems of salt weathering on concrete in the Middle East.
A major benefit of intrusion moulding is the ability to create large cross-sectional and non-uniform shapes, which results in recycled plastic being used in applications as diverse as biofilter floors, underground utility chambers and drop kerbs. The robust nature of the intrusion moulding process also allows different polymers to be blended together in order to obtain the best combination of rigidity and flexibility for specific applications.
The industrial case study refers to the Ecocrib retaining wall, which is manufactured using a blend of post-industrial waste plastics. Ecocrib has been certified by the British Board of Agrément to achieve a Design Service Life in excess of 120 years, which is similar to steel reinforced concrete crib walls and twice that of a wooden alternative; however, the recycled plastic does not require the marine transport or chemical preservatives of timber, whilst avoiding the CO2 emissions of concrete production. Moreover, the Ecocrib headers and stretchers are far lighter than the concrete alternatives, resulting in reduced cost of transport and installation.
Yesterday’s waste can become tomorrow’s construction material.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
BBA. (2016). Agrément Certificate Permacrib 95/3115 p7.
BBA. (2012). Agrément Certificate Ecocrib 12/H194 p5.
British Plastics Federation. (2016). A history of plastics [Online]. Retrieved April 2016, from http://www.bpf.co.uk/plastipedia/plastics_history/default.aspx
Concrete Network. (n.d.). Timeline of concrete and cement history [Online]. Retrieved May 2016, from http://www.concretenetwork.com/concrete-history/
Ecocrib. (2016). Case studies [Online]. Retrieved April 2016, from http://www.ecocribwall.co.uk/case_studies.html
Environment Protection Agency—Standard Volume-to-Weight Conversion Factors, Appendix B, p. 60. Personal communication with a representative from the American Plastics Council. November 2, 1995.
Environmental Association for Universities and Colleges. (2016). Conversion factors for calculation of weight to volume [Online]. Retrieved from http://www.eauc.org.uk/page.php?subsite=waste&page=conversion_factors_for_calculation_of_weight_to_vo
European Commission. (2013). Time for international action on CO2 emissions from shipping.
Gibbons Contractors Ltd. (2016). Gibbons Crib Wall Components p5 [Online] Retrieved May 2016, from http://www.gibbonscontractors.co.nz/gibbons-crib-walls-xidc108107.html
Gorse, C., et al. (2013). R3 products recycled road Kerbs skid testing and evaluation. Leeds: Leeds Metropolitan University.
Hodzic, A. (2010). Technical report on the potential effects of UV radiation and microbiological attack in recycled plastic components manufactured at Lynwood Products Ltd (i-plas). Sheffield: The University of Sheffield, Faculty of Engineering.
Hugo, A.-M., et al. (2011). Development of recycled polymer composites for structural applications. Plastics Rubber and Composites. August 2011.
Missouri University of Science and Technology. Crib Walls [Online] Retrieved from web.mst.edu/~rogersda/umrcourses/ge441/online_lectures/.../GE441-Lecture6-2.pdf
NRMCA. (2012). Concrete CO2 Fact Sheet. Silver Spring MD: National Ready Mixed Concrete Association NRMCA publication number 2PC02 February 2012 from a survey of Portland Cement Association members.
PlasticsEurope. (2015). Plastics—The facts 2015. An analysis of European plastics production, demand and waste data. Brussels: PlasticsEurope.
WRAP. (2008). Domestic mixed plastics packaging waste management options. Banbury: Waste & Resources Action Programme.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this chapter
Cite this chapter
Waghorn, H., Sapsford, P. (2017). The Replacement of Wood or Concrete in Construction Projects: An Industrial Case Study Demonstrating the Benefits of Intrusion Moulded Waste Plastic. In: Dastbaz, M., Gorse, C., Moncaster, A. (eds) Building Information Modelling, Building Performance, Design and Smart Construction. Springer, Cham. https://doi.org/10.1007/978-3-319-50346-2_21
Download citation
DOI: https://doi.org/10.1007/978-3-319-50346-2_21
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-50345-5
Online ISBN: 978-3-319-50346-2
eBook Packages: EnergyEnergy (R0)