Abstract
The term “mass transfer” is used here in a specialized sense, namely, the transport of a substance that is involved as a component (constituent, species) in a fluid mixture. An example is the transport of salt in saline water. As we shall see below, convective mass transfer is analogous to convective heat transfer.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Almubarak, A. A., Al-Saeedi, J. N. and Shoukry, M. 2008 The effect of a boundary layer on drying mechanisms of beach and desert sand. European J. Soil. Sci. 59, 807-816. [3.6]
Auger, J., Yssorche-Cubaynes, M. P., Lorente, S., Cussigh, F. and Demillecamps, L. 2008 Ionic access through porous media with distributed electrodes. J. Applied Physics 104, #184913. [3.7]
Avroam, D. G. and Payatakes, A. C. 1995 Flow regimes and relative permeabilities during steady-state two-phase flow in porous media. J. Fluid Mech. 293, 207-236. [3.5.4]
Balakotaiah, V. and Portalet, P. 1990a Natural convection effects on thermal ignition in a porous medium. I. Semenov model. Proc. Roy. Soc. Lond. A. 429, 533-554. [3.4]
Balakotaiah, V. and Portalet, P. 1990b Natural convection effects on thermal ignition in a porous medium. II. Lumped thermal model-I. Proc. Roy. Soc. Lond. A. 429, 555-567. [3.4]
Barletta, A., Tyvand, P. A. and Nygard, H. S. 2015a Onset of thermal convection in a porous layer with mixed boundary conditions. J. Engng. Math. 91, 105-120. [6.2]
Bejan, A. and Lorente, S. 2006 Constructal theory of generation of configuration in nature and engineering. J. Applied Physics 100, #041301. [3.7]
Bejan, A. and Lorente, S. 2008 Design with Constructal Theory. Wiley, Hoboken. [3.7]
Bejan, A. and Lorente, S. 2010 The constructal law of design and evolution in nature. Phil. Trans. Roy. Soc. B, Biological Sciences 365, 1335-1347. [3.7, 4.14]
Bejan, A. and Lorente, S. 2011 The constructal law and the evolution of design in nature. Physics of Life Reviews 8, 209-240. [3.7, 4.14]
Bejan, A., Dincer, I., Lorente, S., Miguel, A. F. and Reis, A. H. 2004 Porous and Complex Flow Structures in Modern Technologies. Springer, New York. [1.5.2, 2.1, 3.3, 3.7, 4.18, 4.19, 6.26, 10.1.7]
Bennamoun, L. and Belhamri, A. 2008 Mathematical description of heat and mass transfer during deep bed drying: Effect of product shrinkage on bed porosity. Appl. Therm. Engng. 28, 2236-2244. [3.6]
Boher, C., Frizon, F., Lorente, S. and Bart, F. 2013 Influence of the pore network on the hydrogen diffusion through blended cement pastes. Cement and Concrete Composites 37, 30-36. [3.7]
Boher, C., Martin, I., Lorente, S. and Frizon, F. 2014 Experimental investigation of gas diffusion through monomodal materials, application to geopolymers and Vycor glasses. Microporous and Mesoporous Materials 184, 28-36. [3.7]
Bories, S. A. 1991 Fundamentals of drying of capillary-porous bodies. Convective Heat and Mass Transfer in Porous Media (eds. S. Kakac, et al.), Kluwer Academic, Dordrecht, 391-434. [3.6]
Bouddour, A., Auriault, J. L. and Mhamdi-Alaoui, M. 1998 Heat and mass transfer in wet porous media in presence of evaporation. Int. J. Heat Mass Transfer 41, 2263-2277. [3.6]
Brinkman, H. C. 1952 The viscosity of concentrated suspensions and solutions. J. Chem. Phys. 20, 571-581. [3.8]
Bruggeman, D. A. G. 1935 Berechnung verschiedener physikalischer konstanten von heterogenen substanzen I. Dielektrizitätskonstahnten und leitfähigkeiten der mischkörper aus isotropen substanzen. (Calculation of different physical constants of heterogeneous substances. I. Dielectric constants and conductivities of mixtures from isotropic substances.) Ann. Phys. Lpz. 24, 636-679. [3.8]
Buongiorno, J. 2006 Convective heat transfer in nanofluids. ASME J. Heat Transfer 128, 240-250. [3.8]
Chang, W. J. and Wang, C. I. 2002 Heat and mass transfer in porous material. In Transport Phenomena in Porous Media II (D. B. Ingham and I. Pop, eds.) Elsevier, Oxford, pp. 257-275. [3.6]
Chao, B. H., Wang, H. and Cheng, P. 1996 Stagnation point flow of a chemical reactive fluid in a catalytic porous bed. Int. J. Heat Mass Transfer 39, 3003-3019. [3.4]
Chen, H., Besant, R. W. and Tao, Y. X. 1998a Numerical modeling of heat transfer and water vapor transfer and frosting within a fiberglass filled cavity during air infiltration. Heat Transfer 1998, Proc. 11th IHTC, 4, 381-386. [3.6]
Cheng, P. 1978 Convective heat transfer in porous layers by integral methods. Lett. Heat Mass Transfer 5, 243-252. [6.3]
Cheng, P. 1978 Heat transfer in geothermal systems. Adv. Heat Transfer 14, 1-105. [3.5, 6.9.1, 6.26, 11, 11.7]
Corey, A. T., Rathjens, C. H., Henderson, J. H. and Wyllie, M. R. J. 1956 Three-phase relative permeability. Trans. Am. Inst. Min. Metall. Pet. Eng. 207, 349-351. [3.5.4]
Coussot, P. 2000 Scaling approach to the convective drying of a porous medium. European Phys. J. B 15, 557-566. [3.6]
Dalel, H., Lefi, N. and Noureddine, B. 2013 Effect of metrological temperature on vertical porous wall drying process in forced and mixed convection. Int. J. Heat Tech. 31, 75-83. [3.6]
Dantas, L. B., Orlanded, H. R. B. and Cotta, R. M. 2007 Improved lumped-differential formulations and hybrid solution methods for drying in porous media. Int. J. Thermal Sci. 46, 878-889. [3.6]
Dauby, P. C., Nélis, M. and Lebon, G. 2002 Generalized Fourier equations and thermoconvective instabilities. Revista Mexicana de Fisica 48, 57-62. [2.2]
Daurelle, J. V., Topin, F. and Occelli, R. 1998 Modeling of coupled heat and mass transfers with phase change in a porous medium; application to superheated steam drying. Numer. Heat Transfer A 33, 39-63. [3.6]
Dayan, A., Flesh, J. and Saltiel, C. 2004 Drying of a porous spherical rock for compressed air energy storage. Int. J. Heat Mass Transfer 47, 4459-4468. [3.6]
Dickey, J. T. and Peterson, G. P. 1997 High heat flux absorption utilizing porous material with two-phase heat transfer. ASME J. Energy Res. Tech. 119, 171-179. [3.6]
Dos Santos, G. H. and Mendes, N. 2009a Combined heat, air and moisture (HAM) transfer model for porous building materials. J. Building Phys. 32, 203-220. [3.6]
Dos Santos, G. H. and Mendes, N. 2009b Heat, air and moisture transfer through hollow porous blocks. Int. J. Heat Mass Transfer 52, 2390-2398. [3.6]
El Abrach, H., Dhahri, H. and Mhimid, A. 2014 Effects of anisotropy and drying air parameters on drying of deformable porous media hydro-dynamically and thermally anisotropic. Transp. Porous Media 104, 181-203. [3.6]
Erriquible, A., Bernada, P., Coutoure, F. and Roques, M. 2006b Simulation of convective drying of a porous medium with boundary conditions provided by CFD. Chem. Engng. Res. Design 84, 113-123. [3.6]
Farr, W. W., Gabito, J. F., Luss, D. and Balakotaiah, V. 1991 Reaction-driven convection in a porous medium: Part 1. Linear stability analysis. AIChE J. 37, 963-975. [3.4]
Figus, C., Le Bray, Y., Bories, S. and Prat, M. 1998 Heat transfer in porous media considering phase change, capillarity and gravity. Application to capillary evaporator. Heat Transfer 1998, Proc. 11th IHTC, 4, 393-398. [3.6]
Francis, N. D. and Wepfer, J. W. 1996 Jet impingement drying of a moist porous solid. Int. J. Heat Mass Transfer 35, 469-480. [3.6]
Frei, K. M., Cameron, D. and Stuart, P. R. 2004 Novel drying process using forced aeration through a porous biomass matrix. Drying Tech. 22, 1191-1215. [3.6]
Frizon, F., Lorente, S., Ollivier, J. P. and Thouvenot, P. 2003 Transport model for the nuclear decontamination of cementitious materials. Comput. Materials Sci. 27, 507-516. [3.7]
Gabito, J. F. and Balakotaiah, V. 1991 Reaction-driven convection in a porous medium: Part 2. Numerical bifurcation analysis. AIChE J. 37, 976-985. [3.4]
Gatica, J. E., Viljoen, H. J., and Hlavacek, V. 1989 Interaction between chemical reaction and natural convection in porous media. Chem. Eng. Sci. 44, 1853-1870. [3.4]
Gibson, P. W. and Charmchi, M. 1997 Modeling convection/diffusion processes in porous textiles with inclusion of humidity-dependent air permeability. Int. Comm. Heat Mass Transfer 24, 709-724. [3.6]
Gray, W. C. and O’Neill, K. 1976 On the general equations for flow in porous media and their reduction to Darcy’s law. Water Resources Res. 12, 148-154. [3.5.2]
Hanamura, K. and Kaviany, M. 1995 Propagation of condensation front in steam injection into dry porous media. Int. J. Heat Mass Transfer 38, 1377-1386. [3.6]
Hassanizadeh, S. M. and Gray, W. G. 1993 Toward an improved description of the physics of two-phase flow. Adv. Water Resources 16, 53-67. [3.5.4]
Izadifar, M., Biaik, O. D. and Simonson, C. J. 2006 Modeling of the packed bed drying of paddy rice using the local volume averaging (LVA) approach. Food Research Int. 39, 712-720. [3.6]
Jadhav, R. S. and Pillai, K. M. 2003 Numerical study of heat transfer during unsaturated flow in dual-scale porous media. Numer. Heat Transfer A 43, 385-407. [3.6]
Jamialahmadi, M., Muller-Steinhagen, H. and Izadpanah, M. R. 2005 Pressure drop, gas hold-up and heat transfer during single and two-phase flow through porous media. Int. J. Heat Fluid Flow 26, 156-172. [3.5]
Kacur, J. and Van Keer, R. 2003 Numerical approximation of a flow and transport system in unsaturated porous media. Chem Engng. Sci. 58, 4805-4813. [3.6]
Khan, F. A. and Straatman, A. G. 2016 A conjugate fluid-porous approach to convective heat and mass transfer with application to produce drying. J. Food Engng. 179, 55-67. [3.6]
Khanafer, K. and Vafai, K. 2011 A critical analysis of thermophysical characteristics of nanofluids. Int. J. Heat Mass Transfer 54, 4410-4428. [9.7.1]
Kolesnikov, A. K. 1979 Concentration-dependent convection in a horizontal porous bed containing a chemically active liquid. J. Engng. Phys. 36, 97-101. [3.4]
Kowalski, S. J. and Pawlowski, A. 2008 Drying in non-stationary conditions. Chem. Proc. Engng. 29, 337-344. [3.6]
Kowalski, S. J., Musrelak, G. and Banaszak, J. 2010 Heat and mass transfer during microwave-convective drying. AIChE J. 56, 24-35. [3.6]
Kowalski, S. J., Rybicki, A. and Rajewska, K. 2013 Optimal control of convective drying of saturated porous materials. AIChE J. 59, 4846-4857. [3.6]
Kuznetsov, A. V. and Vafai, K. 1995a Development and investigation of three-phase model of the mushy zone for analysis of porosity formation in solidifying castings. Int. J. Heat Mass Transfer 38, 2557-2567. [10.2.3]
Landman, K. A., Pel, L. and Kaassschieler, E. F. 2001 Analytical modeling of drying of porous materials. Math. Engng. Ind. 8, 89-122. [3.6]
Larbi, S., Bacon, G. and Bories, S. A. 1995 Diffusion d'air humide avec condensation de vapeur d'eau en milieu poreux. Int. J. Heat Mass Transfer 38, 2411-2416. [3.6]
Lehmann, P., Assouline, S. and Or, D. 2008 Characteristic length scales affecting vaporative drying of porous media. Phys. Rev. E. 77, 056309. [3.6]
Lin, S., Chao, J. T., Chen, T. F. and Chen, D. K. 1998 Analytical and experimental study of drying process in a porous medium with a non-penetrating surface. J. Porous Media 1, 159-166. [3.6]
Liu, W., Shen, S. and Riffat, S. B. 2002 Heat transfer and phase change of liquid in an inclined enclosure packed with unsaturated porous media. Int. J. Heat Mass Transfer 45, 5209-5219. [3.6]
Lorente, S. 2007 Constructal view of electrokinetic transfer through porous media. J. Physics D: Applied Physics 40 (9), 2941-2947. [3.7]
Lorente, S. and Ollivier, J. P. 2006 Scale analysis of electrodiffusion through porous media. J. Porous Media 9, 307-320. [3.7]
Lu, T. and Shen, S. Q. 2007 Numerical and experimental investigation of paper drying: Heat and mass transfer with phase change in porous media. Appl. Therm. Engng. 27, 1248-1258. [3.6]
Magyari, E. 2011b Comment on “A novel analytical solution of mixed convection about an inclined flat plate embedded in a porous medium using the DTM-Pade” by M. M. Rashidi, N. Laraqi and S. M. Sadri, Int. J. Thermal Sciences 49 (2010) 2406-2412. Int. J. Therm. Sci. 50, 1339-1342. [8.1.1]
Maxwell, J. C. 1904 A Treatise on Electricity and Magnetism, 2nd. ed., Oxford University Press, Cambridge. [3.8]
Mercado, H., Lorente, S. and Bourbon, X. 2012 Chloride diffusion coefficient: A comparison between impedance spectroscopy and electrokinetic tests. Cement and Concrete Composites 34(1), 68-75. [3.7]
Mercado, H., Lorente, S. and Bourbon, X. 2013 The diffusion coefficient of ionic species through unsaturated materials. Transp. Porous Media 96(3), 469-481. [3.7]
Mercado-Mendoza, H., Lorente, S. and Bourbon, X. 2014 Ionic aqueous diffusion through unsaturated cementitious materials – A comparative study. Construction and Building Materials 51, 1-8. [3.7]
Mhimid, A., Ben Nasrallah, S. and Fohr, J. P. 2000 Heat and mass transfer during drying of granular products – simulation with convective and conductive boundary conditions. Int. J. Heat Mass Transfer 43, 2779-2791. [3.6]
Mhimid, A., Fohr, J. P. and Ben Nasrallah, S. 1999 Heat and mass transfer during drying of granular products by combined convection and conduction. Drying Tech. 17, 1043-1063. [3.6]
Mihoubli, D. and Bellagi, A. 2009 Drying induced stresses using convective and combined microwave and convective drying of saturated porous media. Drying Tech. 27, 851-856. [3.6]
Mojtabi, A. and Charrier-Mojtabi, M. C. 2000 Double-diffusive convection in porous media. In Handbook of Porous Media (K. Vafai, ed.), Marcel Dekker, New York., pp. 559-603. [3.3, 9]
Moya, R. E. S., Prata, A. T. and Cunha Neto, J. A. B. 1999 Experimental analysis of unsteady heat and moisture transfer around a heated cylinder buried in a porous medium. Int. J. Heat Mass Transfer 42, 2187-2198. [3.6]
Murugesan, K., Lo, D. C., Young, D. L., Chen, C. W. and Fan, C. M. 2008 Convective drying analysis of three-dimensional porous solid by mass lumping finite element technique. Heat Mass Transfer 44, 401-412. [3.6]
Najjari, M. and Ben Nasrallah, S. 2009 Heat transfer between a porous layer and a forced flow: Influence of layer thickness. Drying Technology 27, 336-343. [3.6]
Nandakumar, K. and Weinitschke, H.J. 1992 A bifurcation of chemically driven convection in a porous medium. Chem. Engng Sci. 47, 4107-4120. [3.4]
Natale, M. F. and Santillan Marcus, E. A. 2003 The effect of heat convection on drying of porous semi-infinite space with a heat flux condition on the fixed face x = 0. Appl. Math. Comp. 137, 109-129. [3.6]
Nganhou, J. 2004 Heat and mass transfer through a thick bed of cocoa beans during drying. Heat Mass Transfer 40, 727-735. [3.6]
Nguyen, D. and Balakotaiah, V. 1995 Reaction-driven instabilities in down-flow packed beds. Proc. Roy. Soc. Lond. A 450, 1-21. [3.4]
Nield, D. A. and Kuznetsov, A. V. 2013a A note on modeling high speed flow in a bidisperse porous medium. Transp. Porous Media 96, 495-499. [4.16.4]
Nield, D. A. and Kuznetsov, A. V. 2014b Forced convection in a parallel-plate channel occupied by a nanofluid or a porous medium saturated by a nanofluid. Int. J. Heat Mass Transfer 70, 430-433. Erratum 76, 534. [9.7.1]
Nield, D. A. and Kuznetsov, A. V. 2015b The effect of vertical throughflow on thermal instability in a porous medium layer saturated by a nanofluid: A revised model. ASME J. Heat Transfer 137, 052601. [9.7.2]
Nield, D. A. and Kuznetsov, A. V. 2015d Effects of nanofluids on convection in porous media. Handbook of Porous Media, 3rd ed. (K. Vafai, ed.), CRS Press, Boca Baton, FL, pp.493-512. [9.7]
Oliveira, L. S. and Haghighi, K. 1998 Conjugate heat and mass transfer in convective drying of porous media. Numer. Heat Transfer A 34, 105-117. [3.6]
Peng, S. W., Besant, R. W. and Strathdee, G. 2000 Heat and mass transfer in granular potash fertilizer with a surface dissolution reaction. Cand. J. Chem. Engng. 78, 1076-1086. [3.6]
Platten, J. K. and Costeseque, P. 2004 The Soret coefficient in porous media. J. Porous Media 7, 317-329. [3.3]
Platten, J. K. and Legros, J. C. 1984 Convection in Liquids, Springer, New York. [3.3]
Ploude, F. and Prat, M. 2003 Pore network simulations of drying of capillary porous media. Influence of thermal gradient. Int. J. Heat Mass Transfer 46, 1293-1307. [3.6]
Plumb, O. A. 1991a Heat transfer during unsaturated flow in porous media. Convective Heat and Mass Transfer in Porous Media (eds S. Kakaç, B. Kilkis, F. A. Kulacki and F. Arinç), Kluwer Academic, Dordrecht, 435-464. [3.6]
Plumb, O. A. 1991b Drying complex porous materials – modelling and experiments. Convective Heat and Mass Transfer in Porous Media (eds. S. Kakaç, B. Kilkis, F. A. Kulacki and F. Arinç), Kluwer Academic, Dordrecht, 963-984. [3.6]
Plumb, O. A. 2000 Transport phenomena in porous media: modeling the drying process. Handbook of Porous Media (K. Vafai, ed.), Marcel Dekker, New York., pp. 755-785. [3.6]
Prat, M. 2007 On the influence of pore shape, contact angle and film flows on drying of capillary porous media. Int. J. Heat Mass transfer 50, 1455-1468. [3.6]
Prommas, R. 2011 Theoretical and experimental study of heat and mass transfer mechanisms during convective drying of a multi-layered porous packed bed. Int. Comm. Heat Mass Transfer 38, 900-905. [3.6]
Prommas, R., Keangin, P. and Rattanadecho, P. 2010 Energy and exergy analyses in convective drying process of a multi-layered porous packed bed. Int. Comm. Heat Mass Transfer 37, 1106-1114. [3.6]
Quintard, M. and Whitaker, S. 2005 Coupled, nonlinear mass transfer and heterogeneous reaction in porous media. Handbook of Porous Media (K. Vafai, ed.), 2nd ed., Taylor and Francis, New York., pp. 3-38. [3.4]
Quintard, M., Bletzacker, L., Chenu, D. and Whitaker, S. 2006 Nonlinear, multicomponent, mass transport in porous media. Chem. Engng. Sci. 61, 2643-2669. [3.4]
Rattanadecho, P. and Klinbun, W. 2012 Numerical analysis of natural convection in porous media subjected to electromagnetic energy using local thermal nonequilibrium (LTNE) models. Drying Tech. 30, 1896-1905. [3.6]
Sakai, F., Li, W. H. and Nakayama, A. 2014 A rigorous derivation and its applications of volume averaged transport equations for heat transfer in a nanofluid saturated metal foams. IHTC 15-8575, Kyoto, Japan. [3.8]
Salagnac, P., Dutournie, P. and Glouannec, P. 2008 Optimal operating conditions of microwave-convective drying of a porous medium. Indust. Engng. Chem.Res. 47, 133-144. [3.6]
Salagnac, P., Glouannec, P. and Lecharpentier, D. 2004 Numerical modeling of heat and mass transfer in porous medium during combined hot air, infrared and microwaves drying. Int. J. Heat Mass Transfer 44, 4479-4489. [3.6]
Salinger, A. G., Aris, R. and Derby, J. J. 1994b Modeling the spontaneous ignition of coal stockpiles. AIChE J. 40, 991-1004. [3.4]
Sander, A. 2007 Thin-layer drying of porous materials: Selection of the appropriate mathematical model and relationships between thin-layer models parameters. Chem. Engng. Process. 46, 1324-1331. [3.6]
Sghaier, J., Jomaa, W. and Belgith, A. 2008 Superheated steam drying of a spherical porous particle. J. Porous Media 11, 633-646. [3.6]
Shen, S., Liu, W. and Tao, W. Q. 2003 Analysis of field synergy on natural convective heat transfer in porous media. Int. Comm. Heat Mass Transfer 30, 1081-1090. [3.6]
Sinha, R., Nayak, A. K. and Sehgal, B. R. 2008 Modeling the natural convection heat transfer and dryout heat flux in a porous debris bed. ASME J. Heat Transfer 130, 104503. [3.6]
Skikiatden, J. and Roberts, J. S. 2007 Predicting moisture profiles in potato and carrot during convective hot air drying using isothermally measured effective diffusivity. J. Food Engng. 84, 516-525. [3.6]
Spanos, T. J. T. 2012 Relative permeability. Mathematical and Numerical Modeling in Porous Media : Applications in Geoscience (ed. M. A. Diaz Vierra, P. N. Sahay, M. Coronado and A. Ortiz Tapia), CRC Press, pp. 1012. [3.5.4]
Straughan, B. 2015a Exchange of stability in Cattaneo-LTNE porous convection. Int. J. Heat Mass Transfer 89, 792-798. .[2.2.6, 6.5]
Straughan, B. 2015b Dependence on the reaction in porous convection. Boll. Unione Math. Ital. 8¸113-120. [9.1.6.4]
Straughan, B. 2015c Importance of Darcy or Brinkman laws upon resonance in thermal convection. Richerche di Matematica , to appear. [6.11.4]
Straughan, B. 2015d Convection with Local Thermal Non-equilibrium and Microfluidic Effects. Springer, New York. [6, 6.11.4]
Stroh, F. and Balakotaiah, V. 1991 Modeling of reaction-induced flow maldistributions in packed beds. AIChE J. 37, 1035-1052. [3.4]
Stroh, F. and Balakotaiah, V. 1992 Stability of uniform flow in packed-bed reactors. Chem. Engng Sci., 47, 593-604. [3.4]
Stroh, F. and Balakotaiah, V. 1993 Flow maldistributions in packed beds: effect of reactant consumption. Chem. Engng Sci. 48, 1629-1640. [3.4]
Subramanian, S. and Balakotaiah, V. 1995 Mode interactions in reaction-driven convection in a porous medium. Chem. Engrg Sci. 50, 1851-1868. [3.4]
Subramanian, S. and Balakotaiah, V. 1997 Analysis and classification of reaction-driven stationary convective patterns in a porous medium. Phys. Fluids 9, 1674-1695. [3.5]
Surasani, V. K., Metzger, T. and Tsotsas, E. 2008a Consideration of heat transfer in pore network modelling of convective drying. Int. J. Heat Mass Transfer 51, 2506-2518. [3.6]
Surasani, V. K., Metzger, T. and Tsotsas, E. 2008b The influence of heating mode on drying behaviour of capillary porous media. Chem. Engng. Sci. 63, 5218-5228. [3.6]
Tao, Z., Wu, H., Chen, G. and Deng, H. 2005 Numerical simulation of conjugate heat and mass transfer process within cylindrical porous media with cylindrical dielectric cores in microwave freeze-drying. Int. J. Heat Mass Transfer 48, 561-572. [3.6]
Tien, C. L. and Vafai, K. 1990a Convective and radiative heat transfer in porous media. Adv. Appl. Mech. 27, 225-281. [3.6]
Tiwari, R. K. and Das, M. K. 2007 Heat transfer augmentation in a two-sided lid-driven differentially heated square cavity utilizing nanofluids. Int. J. Heat Mass Transfer 50, 2002-2018. [3.8]
Vafai, K., Desai, C.P. and Chen, S.C. 1993 An investigation of heat transfer process in a chemically reacting packed bed. Numer. Heat Transfer A 24, 127-142. [3.4]
Viskanta, R. 2005 Combustion and heat transfer in inert porous media. Handbook of Porous Media (ed. K. Vafai), 2nd ed., Taylor and Francis, New York, pp. 607-644. [3.3]
Wang, C. Y. and Cheng, P. 1996 A multiphase mixture model for multiphase, multicomponent transport in capillary porous media.— I. Model development. Int. J. Heat Mass Transfer 39, 3607-3618. [3.5.5]
Wang, C. Y. and Cheng, P. 1997 Multiphase flow and heat transfer in porous media. Adv. Heat Transfer 30, 93-196. [3.6]
Wang, C. Y. and Cheng, P. 1998 Multidimensional modeling of steam injection into porous media. ASME J. Heat Transfer 120, 286-290. [3.6]
Wang, H. L., Lu, T. and Zhang, Q. G. 2016g Drying characteristics of biological porous media during convective drying. Int. J. Agric. Biol. Engng. 9 (5), 194–207. [3.6]
Wattez, T., and Lorente, S. 2015 From pore network prediction based on the Constructal law to macroscopic properties of porous media. J. Phys. D 48, 485503. [3.7]
Wattez, T., Duhart-Barone, A. and Lorente, S. 2015 Tritium through-diffusion tests in non-steady state: can the effective diffusion coefficient be determined? Construction and Building Materials 93, 121-129. [3.7]
Wattez, T., Lorente, S. and Duhart-Barone, A. 2013 Modeling of nuclear species diffusion through cement-based materials. Transp. Porous Media 98, 699-712. [3.7]
Whitaker, S. 1999 The Method of Volume Averaging. Springer, New York. [1.1, 3.5]
Yan, Y. H., Ochterbeck, J. M. and Peng, X. F. 1998 Numerical study of capillary rewetting in porous media. Heat Transfer 1998, Proc. 11 th IHTC, 4, 509-514. [3.6]
Yiotis, A. G., Tsimpanogiannis, I. N., Stubos, A. K. and Yortsos, Y. C. 2007 Coupling between external and internal mass transfer during drying of a porous medium. Water Resour. Res. 43, #W06403. [3.6]
Yu, W. P., Wang, B. X. and Shi, M. H. 1993 Modelling of heat and mass transfer in unsaturated wet porous medal with consideration of capillary hysteresis. Int. J. Heat Mass Transfer 36, 3671-3676. [3.6]
Zhang, W., Li, W. and Nakayama, A. 2015c An analytical consideration of steady-state forced convection within a nanofluid-saturated metal foam. J. Fluid Mech. 769, 590-620. [3.8, 9.7.1]
Zhao, T. S. and Liao, Q. 2000 On capillary-driven flow and phase-change heat transfer in a porous structure heated by a finned surface: measurements and modeling. Int. J. Heat Mass Transfer 43, 1141-1155. [3.6]
Zhu, N. and Vafai, K. 1996 The effects of liquid-vapor coupling and non-Darcian transport on asymmetrical disk-shaped heat pipes. Int. J. Heat Mass Transfer 39, 2095-2113. [3.6]
Zili, L. and Ben Nasrallah, S. 1999 Heat and mass transfer during drying in cylindrical packed beds. Numer. Heat Transfer A 36, 210-228. [3.6]
Zili-Ghedira, L, Slimi, K. and Ben Nasrallah, S. 2003 Double diffusive natural convection in a cylinder filled with moist porous grains and exposed to a constant wall heat flux. J. Porous Media 6, 123-136. [3.6]
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2017 Springer International Publishing AG
About this chapter
Cite this chapter
Nield, D.A., Bejan, A. (2017). Mass Transfer in a Porous Medium: Multicomponent and Multiphase Flows. In: Convection in Porous Media. Springer, Cham. https://doi.org/10.1007/978-3-319-49562-0_3
Download citation
DOI: https://doi.org/10.1007/978-3-319-49562-0_3
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-49561-3
Online ISBN: 978-3-319-49562-0
eBook Packages: EngineeringEngineering (R0)