Skip to main content
SpringerLink
Log in
Book cover

Sol-gel Based Nanoceramic Materials: Preparation, Properties and Applications pp 157–183Cite as

Ceramic Nanocomposites for Solid Oxide Fuel Cells

  • Chapter
  • First Online:

Abstract

Solid oxide fuel cells (SOFCs) are considered as prospective technology for direct conversion of the energy of chemical fuels into electricity. The development of highly efficient SOFC capable to operate in a range of operational temperature with various fuels, however, needs improvements in the microstructural and physical properties of the cell individual parts including electrodes, electrolytes, and current collectors. It is well understood that electrochemical function of the SOFC individual parts strongly depend on microstructural properties including porosity and pore-size distribution, particle size and size distribution, composition and spatial distribution of the constituent phases, and the length of the so-called triple-phase boundaries (TPBs) in the electrodes. Therefore, performing a control over the particle size and shape of the powders (the nanocomposite precursors) used for fabrication of SOFCs as well as controlling the other processing parameters (such as sintering temperature, shrinkage, ceramic to pore-former loading ratio) offer a capability to fabricate both SOFCs with desired electrochemical, mechanical, and thermal performance. Synthesis of nanomaterial has significantly considered as an important and hot field because it offers fast redox reactions, high specific surface areas, and shortened diffusion paths in the solid phase. Reviewing the literature in the past few years shows that optimizing the microstructural properties of SOFC through combination of advanced nanostructured materials in order to improve the electrochemical performance of the cell has still remained as a significant challenge in developing efficient SOFCs. In this chapter we review the articles in the field of synthesis and application of nanocomposite material for SOFCs and present some significant contributions from many research groups who are working in this area. The SOFC nanocomposite material in this chapter is mainly classified into three categories—electrolyte, anode and cathode that are followed by two operational ranges of temperature including high and low temperature.

This is a preview of subscription content, log in via an institution.

Chapter
USD   29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD   84.99
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD   109.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info
Hardcover Book
USD   109.99
Price excludes VAT (USA)
  • Durable hardcover edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Learn about institutional subscriptions

References

  1. U.S. Department of Energy (n.d) Types of fuel cells [Online]. Washington, DC Available http://energy.gov/eere/fuelcells/types-fuel-cells. Accessed 27 Aug 2015

  2. Fuel cell Energy Inc. (2013) Solid oxide fuel cells [Online]. Available http://www.fuelcellenergy.com/advanced-technologies/solid-oxide-fuel-cells/. Accessed 27 Aug 2015

  3. Singhal SC (2013) Solid oxide fuel cells: past, present and future In: John TS, Irvine PC (eds) Solid oxide fuels cells: facts and figures. Springer, London

    Google Scholar 

  4. Guindet AHAJ (1996) Solid oxide fuel cells. In: Gellings PJ, Bouwmeester HJ (eds) The CRC handbook of solid state electrochemistry. CRC Press, United States of America

    Google Scholar 

  5. Singhal SC (2014) Solid oxide fuel cells for power generation. Wiley Interdisc Rev Energy Environ 3:16

    Google Scholar 

  6. Minh NQ (2004) Solid oxide fuel cell technology—features and applications. Solid State Ionics 174:7

    Article  Google Scholar 

  7. Faes A, Hessler-Wyser A, Zryd A, Herle JV (2012) A review of redox cycling of solid oxide fuel cells anode. Membranes 2:80

    Article  Google Scholar 

  8. BloomEnergy. 2016. How a solid oxide fuel cell works [Online]. 1299 Orleans Drive, Sunnyvale, California. Available http://www.bloomenergy.com/fuel-cell/solid-oxide-fuel-cell-animation/. Accessed 1 Feb 2016

  9. Singhal SC (2000) Advances in solid oxide fuel cell technology. Solid State Ionics 135:9

    Article  Google Scholar 

  10. Jiang SP, Chan SH (2004) A review of anode materials development in solid oxide fuel cells. J Mater Sci 39:35

    Google Scholar 

  11. Manithiram A, Kumta PN, Sundaram SK, Chan S-W (2004) Developments in solid oxide fuel cells and lithium ion batteries. Ceram Trans 161:10

    Google Scholar 

  12. El-Kemary M, Nagy N, El-Mehasseb I (2013) Nickel oxide nanoparticles: synthesis and spectral studies of interactions with glucose. Mater Sci Semicond Process 16:6

    Article  Google Scholar 

  13. Ba-Abbad MM, Chai PV, Takriff MS, Benamore A, Mohammad AW (2015) Optimization of nickel oxide nanoparticle synthesis through the sol–gel method using Box-Behnken design. Mater Des 86:9

    Google Scholar 

  14. Shao Z, Zhou W, Zhu Z (2011) Advanced synthesis of materials for intermediate-temperature solid oxide fuel cells. Prog Mater Sci 57:804–874

    Google Scholar 

  15. Sk MM, Yue CY, Ghosh K, Jena RK (2016) Review on advances in porous nanostructured nickel oxides and their composite electrodes for high-performance supercapacitors. J Power Sources 308:20

    Article  Google Scholar 

  16. Mahaleh YBM, Sadrnezhaad SK, Hosseini D (2008) NiO nanoparticles synthesis by chemical precipitation and effect of applied surfactant on distribution of particle size. J Nanomaterials 2008:4

    Google Scholar 

  17. Kumar R, Sharma A, Kishore N, Budhiraja N (2013) Preparation and characterization of NiO nanoparticles by co-precipitation method. Int J Eng Appl Manage Sci Paradigms 6:4

    Google Scholar 

  18. Su D, Kim H-S, Kim W-S, Wang G (2012) Mesoporous nickel oxide nanowires: hydrothermal synthesis, characterisation and applications for lithium-ion batteries and supercapacitors with superior performance. Chem A Eur J 6

    Google Scholar 

  19. Sanson A, Pinasco P, Roncari E (2008) Influence of pore formers on slurry composition and microstructure of tape cast supporting anodes for SOFCs. J Eur Ceram Soc 28:6

    Article  Google Scholar 

  20. Aruna ST, Muthuraman M, Patil KC (1998) Synthesis and properties of Ni-YSZ cermet: anode material for solid oxide fuel cells. Solid State Ionics 111:7

    Article  Google Scholar 

  21. Xiao G, Chen F (2014) Redox stable anodes for solid oxide fuel cells. Front Energy Res 2

    Google Scholar 

  22. Prakash BS, Kumar SS, Aruna ST (2014) Properties and development of Ni/YSZ as an anode material in solid oxide fuel cell: a review. Renew Sustain Energy Rev 36:149–179

    Article  Google Scholar 

  23. Cho HJ, Choi GM (2007) Effect of milling methods on performance of Ni-Y2O3-stabilized ZrO2 anode for solid oxide fuel cell. J Power Sources 176:96–101

    Article  Google Scholar 

  24. Hong HS, Chae U-S, Choo S-T (2007) The effect of ball milling parameters and Ni concentration on a YSZ-coated Ni composite for a high temperature electrolysis cathode. J Alloy Compd 449:331–334

    Article  Google Scholar 

  25. Koide H, Someya Y, Yoshida T, Maruyama T (2000) Properties of Ni/YSZ cermet as anode for SOFC. Solid State Ionics 132:8

    Article  Google Scholar 

  26. Horri BA, Selomulya C, Wang H (2012) Characteristics of Ni/YSZ ceramic anode prepared using carbon microspheres as a pore former. Int J Hydrogen Energy 37:9

    Google Scholar 

  27. He C, Chen T, Wang WG (2008) The mechanical and electrical properties of Ni/YSZ anode support for solid oxide fuel cells. Anodes

    Google Scholar 

  28. Yu JH, Park GW, Lee S, Woo SK (2006) Microstructural effects on the electrical and mechanical properties of Ni-YSZ cermet for SOFC anode. J Power Sources 163:926–932

    Article  Google Scholar 

  29. Zupan K, Marinsek M (2011) Microstructure development of the Ni-GDC anode material for IT-SOFC. Mater Technol 46:445–451

    Google Scholar 

  30. Yamamoto K, Qiu N, Ohara S (2015) In situ fabrication of high performance Ni-GDC-nanocube core-shell anode for low-temperature solid-oxide fuel cells. Sci Rep 5:1–6

    Google Scholar 

  31. Shukla S, Seal S, Vij R, Bandyopadhyay S (2003) Reduced activation energy for grain growth in nanocrystalline yttria-stabilized zirconia. Nano Lett 3:397–401

    Article  Google Scholar 

  32. Smith DK, Cline CF (1962) J Am Ceramic Soc 45

    Google Scholar 

  33. Courtin E, Boy P, Rouhet C, Bianchi L, Bruneton E, Poirot N, Laberty-Robert C, Sanchez C (2012) Optimized sol–gel routes to synthesize yttria-stabilized zirconia thin films as solid electrolytes for solid oxide fuel cells. Chem Matter 24:4540–4548

    Google Scholar 

  34. Hao S-J, Wang C, Liu T-L, Wang J-L, Maoa Z-Q (2016) Preparation and characterization of yttria stabilized zirconia nanoarrays. Ceram Int 42:9323–9326

    Google Scholar 

  35. Guiot C, Grandjean S, Lemmonier S, Jolivet J, Batail P (2009) Nano single crystals of yttria-stabilized zirconia. Cryst Growth Des 9:3480–3550

    Article  Google Scholar 

  36. Sato K, Horiguchi K, Nishikawa T, Sadahiro Y, Kuruma K, Murakami T, Abe H (2015) Hydrothermal synthesis of yttria-stabilized zirconia nanocrystals with controlled ytrria content. Inorg Chem 54:7976–7984

    Google Scholar 

  37. Goto Y, Omata T, Otsuka Y (2009) S.J. Electrochem Soc 156

    Google Scholar 

  38. Geier M, Parker T (2013) Electrospray flame synthesis of yttria-stabilized zirconia nanoparticles. Ind Eng Chem Res 52:16842–16850

    Article  Google Scholar 

  39. Kharton V, Marques F, Atkinson A (2004) Transport properties of solid oxide electrolyte ceramics: a brief review. Solid State Ionics 174:135–149

    Article  Google Scholar 

  40. Yamamoto O, Arachi Y, Sakai H, Takeda N, Imanishi Y, Mizutani M, Kawai M, Nakamura Y (1998) Zirconia based oxide ion conductors for solid oxide fuel cells. Ionics 4:403–408

    Google Scholar 

  41. Atkinson A (1997) Chemically-induced stresses in gadolinium-doped ceria SOFC. Solid State Ionics 95:249–258

    Article  Google Scholar 

  42. Ishihara T, Matsuda H, Takita Y (1993) Doped LaGaO3 perovskite type oxide as new oxide ionic conductor. J Am Chem Soc 116:3801–3803

    Article  Google Scholar 

  43. Liu Z, Liu M, Yang L, Liu M (2013) LSM-infiltrated LSCF cathodes for solid oxide fuel cells. J Energy Chem 22:555–559

    Article  Google Scholar 

  44. Wang S, Jiang Y, Zhang Y, Yan J, Li W (1998) Promoting effect of YSZ on the electrochemical performance of YSZ+ LSM composite electrodes. Solid State Ionics 113–115:291–303

    Article  Google Scholar 

  45. Gómez L, Colomer MT, Escobar J, Moreno R (2013) Manufacture of a non-stoichiometric LSM cathode SOFC material by aqueous tape casting. J Eur Ceram Soc 33:1137–1143

    Article  Google Scholar 

  46. Murray EP, Tsai T, Barnett SA (1998) Oxygen transfer processes in (La, Sr)MnO3/Y2O3-stabilized ZrO2 cathodes: an impedance spectroscopy study. Solid State Ionics 110:235–243

    Article  Google Scholar 

  47. Lau SK, Singhal SC (1985) Potential electrode/electrolyte interactions in solid oxide fuel cells. National Association of Corrosion Engineers, United States

    Google Scholar 

  48. Saha S, Ghanawat SJ, Purohit RD (2006) Solution combustion synthesis of nano particle La0.9Sr0.1MnO3 powder by a unique oxidant-fuel combination and its characterization. J Mater Sci 41:1939–1943

    Article  Google Scholar 

  49. Pechini PM (1967) Method of preparing lead and alkaline earth titanates and niobates and coating method using the same to form a capacitor. Google Patents

    Google Scholar 

  50. Burnat D, Heel A, Holzer L, Kata D, Lis J, Graule T (2012) Synthesis and performance of A-site deficient lanthanum-doped strontium titanate by nanoparticle based spray pyrolysis. J Power Sources 201:26–36

    Article  Google Scholar 

  51. da Conceição L, Souza MMVM (2013) Synthesis of La0.7Sr0.3MnO3 thin films supported on Fe–Cr alloy by sol–gel/dip-coating process: evaluation of deposition parameters. Thin Solid Films 534:218–225

    Article  Google Scholar 

  52. Baláž P, Achimovičová M, Baláž M, Billik P, Cherkezova-Zheleva Z, Criado JM, Delogu F, Dutková E, Gaffet E, Gotor FJ, Kumar R, Mitov I, Rojac T, Senna M, Streletskii A, Wieczorek-Ciurowa K (2013) Hallmarks of mechanochemistry: from nanoparticles to technology. Chem Soc Rev 42:7571–7637

    Article  Google Scholar 

  53. Moriche R, Marrero-López D, Gotor FJ, Sayagués MJ (2014) Chemical and electrical properties of LSM cathodes prepared by mechanosynthesis. J Power Sources 252:43–50

    Article  Google Scholar 

  54. Zheng Y, Ge S, Zhou X, Chen H, Huang S, Wang S, Sun Y (2012) LSM particle size effect on the overall performance of IT-SOFC. J Rare Earths 30:1240–1244

    Article  Google Scholar 

  55. Choi JH, Jang JH, Ryu JH, Oh SM (2000) Microstructure and cathodic performance of La0.9Sr0.1MnO3 electrodes according to particle size of starting powder. J Power Sources 87:92–100

    Article  Google Scholar 

  56. Wang JX, Tao YK, Shao J, Wang WG (2009) Synthesis and properties of (La0.75Sr0.25)0.95MnO3±δ nano-powder prepared via Pechini route. J Power Sources 186:344–348

    Article  Google Scholar 

  57. Marinšek M (2009) Electrical conductivity of sintered LSM ceramics. Mater Tehnologije 43:79–84

    Google Scholar 

  58. Yang S-H, Kim K-H, Yoon H-H, Kim W-J, Choi H-W (2011) Comparison of combustion and solid-state reaction methods for the fabrication of SOFC LSM cathodes. Mol Cryst Liq Cryst 539:50/[390]–57/[397]

    Google Scholar 

  59. Kakinuma K, Machida S, Horiuchi K, Hasunuma S, Yamamura H, Atake T (2006) Cathodic characteristics of (La0.6Sr0.4)(Mn1−x Mx)O3−δ (M = Co, Ni) for use in a solid oxide fuel cell with a (Ba0.3Sr0.2La0.5) InO2.75 electrolyte. Solid State Ionics 177:2159–2164

    Article  Google Scholar 

  60. Teraoka Y, Zhang H-M, Furukawa S, Yamazoe N (1985) Oxygen permeation through perovskite-type oxides. Chem Lett 14:1743–1746

    Article  Google Scholar 

  61. Dutta A, Mukhopadhyay J, Basu RN (2009) Combustion synthesis and characterization of LSCF-based materials as cathode of intermediate temperature solid oxide fuel cells. J Eur Ceram Soc 29:2003–2011

    Article  Google Scholar 

  62. Mai A, Haanappel VAC, Uhlenbruck S, Tietz F, Stöver D (2005) Ferrite-based perovskites as cathode materials for anode-supported solid oxide fuel cells: part I. Variation of composition. Solid State Ionics 176:1341–1350

    Article  Google Scholar 

  63. Richardson RA, Mark Ormerod R, Cotton JW (2003) Influence of synthesis route on the powder properties of a perovskite-type oxide. Ionics 9:77–82

    Google Scholar 

  64. Kahoul A, Hammouche A, Nâamoune F, Chartier P, Poillerat G, Koenig JF (2000) Solvent effect on synthesis of perovskite-type La1−xCaxCoO3 and their electrochemical properties for oxygen reactions. Mater Res Bull 35:1955–1966

    Article  Google Scholar 

  65. Mai A, Haanappel VAC, Tietz F, Stöver D (2006) Ferrite-based perovskites as cathode materials for anode-supported solid oxide fuel cells. Part II. Influence of the CGO interlayer. Solid State Ionics 177:2103–2107

    Article  Google Scholar 

  66. Liu M, Ding D, Blinn K, Li X, Nie L, Liu M (2012) Enhanced performance of LSCF cathode through surface modification. Int J Hydrogen Energy 37:8613–8620

    Article  Google Scholar 

  67. Department of Materials Science and Metallurgy, University of Cambridge (2010) Fuel cells [Online]. University of Cambridge, Cambridge. Accessed 2 Apr 2016

    Google Scholar 

  68. Cao P, Wang L, Xu Y, Fu Y, Ma X (2015) Facile hydrothermal synthesis of mesoporous nickel oxide/reduced graphene oxide composites for high performance electrochemical supercapacitor. Electrochim Acta 157:10

    Article  Google Scholar 

  69. Wang Z, Xu C, Lou Z, Qiao J, Ren B, Sun K (2013) Preparation and characterization of silver-modified La0.8Sr0.2MnO3 cathode powders for solid oxide fuel cells by chemical reduction method. Int J Hydrogen Energy 38:1074–1081

    Article  Google Scholar 

  70. Wiff JP, Jono K, Suzuki M, Suda S (2011) Improved high temperature performance of La0.8Sr0.2MnO3 cathode by addition of CeO2. J Power Sources 196:6196–6200

    Article  Google Scholar 

  71. Leng YJ, Chan SH, Khor KA, Jiang SP (2005) (La0.8Sr0.2)0.9MnO3–Gd0.2Ce0.8O1.9 composite cathodes prepared from (Gd, Ce)(NO3) x-modified (La0.8Sr0.2)0.9MnO3 for intermediate-temperature solid oxide fuel cells. J Solid State Electrochem 10:339–347

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Chemical Engineering Discipline, School of Engineering, Monash University Malaysia, Jalan Lagoon Selatan, 47500, Bandar Sunway, Selangor, Malaysia

    Hui Hui Lim, Erick Sulistya, May Yuan Wong & Babak Salamatinia

  2. Department of Chemical and Process Engineering, University of Surrey, Guildford, Surrey, GU2 7XH, UK

    Bahman Amini Horri

Authors
  1. Hui Hui Lim
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Erick Sulistya
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. May Yuan Wong
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Babak Salamatinia
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Bahman Amini Horri
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Bahman Amini Horri .

Editor information

Editors and Affiliations

  1. Nanotechnology and Water Sustainability Research Unit, University of South Africa, Johannesburg, South Africa

    Ajay Kumar Mishra

Rights and permissions

Reprints and permissions

Copyright information

© 2017 Springer International Publishing AG

About this chapter

Cite this chapter

Lim, H.H., Sulistya, E., Wong, M.Y., Salamatinia, B., Amini Horri, B. (2017). Ceramic Nanocomposites for Solid Oxide Fuel Cells. In: Mishra, A. (eds) Sol-gel Based Nanoceramic Materials: Preparation, Properties and Applications. Springer, Cham. https://doi.org/10.1007/978-3-319-49512-5_6

Download citation

Publish with us

Policies and ethics

Search

Navigation