Abstract
In this work evolution of texture components during deformation of AA5754 aluminum alloy sheet under cold rolling is studied by analyzing the evolution of element-rotation-distribution calculated using a rate-dependent crystal plasticity finite element model (CPFEM). The proposed criteria can successfully predict the stability of a given textural component for cold rolling deformation in FCC materials with high stacking fault energy that deform predominantly by slip. Comparison of simulation results with experimental data shows that this approach successfully captures the stable textures reported for cold rolled AA5754 sheets. With the initial texture and the strain path, it is believed that, the method described in this work can be used to predict the final stable textures without any need for expensive crystal plasticity based numerical simulations and this could be of immense help for simulating large strain deformation of macroscale sheet samples exhibiting texture evolution.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
M. Knezevic, B. Drach, M. Ardeljan, and I. J. Beyerlein, “Three dimensional predictions of grain scale plasticity and grain boundaries using crystal plasticity finite element models,” Comput. Methods Appl. Mech. Eng., May 2014.
K. Inal, P. D. D. Wu, and K. W. W. Neale, “Finite element analysis of localization in FCC polycrystalline sheets under plane stress tension,” Int. J. Solids Struct., vol. 39, no. 13–14, pp. 3469–3486, Jun. 2002.
J. Rossiter, A. Brahme, M. H. Simha, K. Inal, and R. Mishra, “A new crystal plasticity scheme for explicit time integration codes to simulate deformation in 3D microstructures: Effects of strain path, strain rate and thermal softening on localized deformation in the aluminum alloy 5754 during simple shear,” Int. J. Plast., vol. 26, no. 12, pp. 1702–1725, Dec. 2010.
E. D. Cyr, M. Mohammadi, R. K. Mishra, and K. Inal, “A Three Dimensional (3D) Thermo-Elasto-Viscoplastic Constitutive Model for FCC Polycrystals,” Int. J. Plast, vol. 70, pp. 166–190, 2015.
W. Muhammad, M. Mohammadi, J. Kang, R. K. Mishra, and K. Inal, “An elasto-plastic constitutive model for evolving asymmetric/anisotropic hardening behavior of AZ31B and ZEK100 magnesium alloy sheets considering monotonic and reverse loading paths,” Int. J. Plast, vol. 70, pp. 30–59, 2015.
D. Ghaffari Tari, M. J. Worswick, U. Ali, and M. a. Gharghouri, “Mechanical response of AZ31B magnesium alloy: Experimental characterization and material modeling considering proportional loading at room temperature,” Int. J. Plast, vol. 55, pp. 247–267, Apr. 2014.
J. Asaro and A. Needleman, “An Analysis of Nonuniform and Localized Deformation in Ductile Single Crystals,” Acta Metall, 1981.
A. Brahme, M. H. Alvi, D. Saylor, J. Fridy, and A. D. Rollett, “3D reconstruction of microstructure in a commercial purity aluminum,” Scr. Mater., vol. 55, no. 1, pp. 75–80, 2006.
R. J. Asaro and A. Needleman, “Texture Development and Strain Hardening In Rate Dependent Polyrystals,” Acta Metall, vol. 33, no. 42, pp. 923–953, 1985.
L. S. T. Corporation, “LS-DYNA Theory Manual, Version 970,” Livermore, CA, 2003.
U. Ali, A. Brahme, R. K. Mishra, and K. Inal, “Comparing the through thickness response of AA5754 sheet under Rolling and Plane Strain Compression using Crystal Plasticity,” Under Prep.
H. Jin and D. J. Lloyd, “The different effects of asymmetric rolling and surface friction on formation of shear texture in aluminium alloy AA5754,” Mater. Sci. Technol, vol. 26, no. 6, pp. 754–760, Jun. 2010.
U. Ali, A. Brahme, R. K. Mishra, and K. Inal, “Multi-Scale Modeling of Subgrain formation During Cold Rolling Using a Crystal Plasticity Based Element Free Galerkin Model,” in TMS 2015, 2015.
U. Ali, A. Brahme, R. K. Mishra, and K. Inal, “Multi-scale Numerical Modeling of Using A Crystal Plasticity Based Element Free Galerkin Model,” in SPD07, 2014.
J. Cho, A. D. Rollett, and K. H. Oh, “Determination of a Mean Orientation in Electron Backscatter Diffraction Measurements of Average Orientations,” Metall. Mater. Trans. A, vol. 36, no. 12, pp. 3427–3438, 2005.
Y. Zhou, L. S. Tóth, and K. W. Neale, “On the stability of the ideal orientations of rolling textures for f.c.c. polycrystals,” Acta Mater., vol. 40, no. 11, pp. 3179–3193, 1992.
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2016 TMS (The Minerals, Metals & Materials Society)
About this chapter
Cite this chapter
Ali, U., Brahme, A.P., Mishra, R.K., Inal, K. (2016). New Methodology to Determine Stable Texture Components under Cold Rolling in FCC Metals. In: Williams, E. (eds) Light Metals 2016. Springer, Cham. https://doi.org/10.1007/978-3-319-48251-4_27
Download citation
DOI: https://doi.org/10.1007/978-3-319-48251-4_27
Publisher Name: Springer, Cham
Print ISBN: 978-3-319-48615-4
Online ISBN: 978-3-319-48251-4
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)